Looking at the -24 in global menu - is this as low as we go?
I can’t seem to get VCO 1 to the low octave (I.e the detuned -12 VCO 2 pitch)
Do I need a new controller with an octave down shift button or is it true with all these wonderful features that you can’t even get a low B.....?
Minitaur range
Re: Minitaur range
What kind of controller you are using?
(From Minitaur's specs: OSCILLATOR CALIBRATION RANGE: 22Hz-6.8KHz. Note range at 8’ = 0 - 72)
(From Minitaur's specs: OSCILLATOR CALIBRATION RANGE: 22Hz-6.8KHz. Note range at 8’ = 0 - 72)
Minitaur / MF Delay / MF Trem / CP-251 / Mac Mini / OS X 10.11.6
Re: Minitaur range
That interesting because the T3 can stretch into subaudio range over MIDI. We're talking below 20hz.
Gear list: '04 Saturn Ion, John Deere X300 tractor, ganged set of seven reel mowers for 3 acres of lawn, herd of sheep for backup lawn mowers, two tiger cats for mouse population control Oh you meant MUSIC gear Oops I hit the 255 character limi
Re: Minitaur range
Does it have something to do with the power supply on the T3? I remember hearing Steve talk about (or reading about) the lack of range in the MT being caused by the fact that the power supply is wall wart style with a minimalistic rectifier circuit on the Minitaur board meanwhile (I suppose) the T3 has more of a traditional power supply.MC wrote:That interesting because the T3 can stretch into subaudio range over MIDI. We're talking below 20hz.
I don't know enough about electronics to know if this makes sense but you probably do.
'76 Minimoog, Taurus 3, Oberheim FVS + Son of 2-voice; Sequential ProOne; Juno 106; Moog Model 15; Kurzweil 250; Hammond M3; and a handful of Fender Basses Flickr!