Lo Z / Hi Z - T3

Welcome to the Taurus, Minitaur and Sirin Forum
Post Reply
Scott Rolf
Posts: 151
Joined: Wed Oct 31, 2007 4:56 pm
Location: So. Cal.

Lo Z / Hi Z - T3

Post by Scott Rolf » Sat Sep 06, 2014 3:38 pm

I rearranged my music room which meant disconnecting some equipment and reconnecting.
So now I'm looking at the Lo Z and Hi Z impedance outputs on my T3 and asking myself "Now, how did I have that connected?"
So here's my signal path:
T3 + Macki Mixer Line IN + Macki Mixer Main OUT (L & R) + Two QSC 1,000 watt Powered PA's IN

Question: I should use the Lo Z OUT from the T3?
Rael Imperial Aerosol Kid

matbard
Posts: 17
Joined: Sat Oct 02, 2010 7:12 pm
Location: Florence(Italy)
Contact:

Re: Lo Z / Hi Z - T3

Post by matbard » Sat Sep 06, 2014 6:15 pm

Yes, the lo-Z drivers a line-in input.

The hi-Z is intented to be connected to a bass guitar amp.

- Matteo

Scott Rolf
Posts: 151
Joined: Wed Oct 31, 2007 4:56 pm
Location: So. Cal.

Re: Lo Z / Hi Z - T3

Post by Scott Rolf » Sat Sep 06, 2014 6:17 pm

Thank you.
Rael Imperial Aerosol Kid

Post Reply