Minitaur Editor - Hardware Disconnected
Minitaur Editor - Hardware Disconnected
Hi,
my minitaur editor doesnt let me to load presets (everything like tweaking other functions in Panel Tab etc works fine btw). In preset manager tab it says: hardware disconnected. I am connected via USB (setting: midi input: mood minitaur, midi output: mood minitaur).
please advise...
Thanks
T.
my minitaur editor doesnt let me to load presets (everything like tweaking other functions in Panel Tab etc works fine btw). In preset manager tab it says: hardware disconnected. I am connected via USB (setting: midi input: mood minitaur, midi output: mood minitaur).
please advise...
Thanks
T.
Re: Minitaur Editor - Hardware Disconnected
try to run only the editor.
I have the same issue when running the editor and a virtual key or a midi/sysex manager
I have the same issue when running the editor and a virtual key or a midi/sysex manager
Re: Minitaur Editor - Hardware Disconnected
I am having a similar issue - I am sometimes able to get the software to connect but the communication is only 1-way (the knob settings on the minitaur are reflected on my screen but changes I make in the software do not translate back to the machine). Also, this is inconsistent at best and requires power cycling the unit. The status always shows as "hardware disconnected" in the editor.
-
- Posts: 1
- Joined: Thu Apr 17, 2014 8:10 am
Re: Minitaur Editor - Hardware Disconnected
I'm also having this problem!
Re: Minitaur Editor - Hardware Disconnected
I'm having the same issue, always "Disconnected" or "Hardware Disconnected" in the firmware. I'm not even sure if my firmware update worked, as I can't tell. I hope this gets looked at.
Re: Minitaur Editor - Hardware Disconnected
Hey once again,
I contacted support - hopefully they will answer. I will let you know as soon as I know something more.
re:TLA - I don't really get it what you mean under "try to run only the editor". I am actually running only the editor (no DAW or so...).
best, T.
I contacted support - hopefully they will answer. I will let you know as soon as I know something more.
re:TLA - I don't really get it what you mean under "try to run only the editor". I am actually running only the editor (no DAW or so...).
best, T.
Re: Minitaur Editor - Hardware Disconnected
Having the exact same problem, and tried it on both mac osx 10.8.5 and pc windows 7 64bit. Seriously a major problem. Already returned one Minitaur thinking I had a defective unit, now seeing that it's a full on issue. This really makes it unusable....please fix!!!
-
- Posts: 1
- Joined: Tue Apr 22, 2014 10:47 am
Re: Minitaur Editor - Hardware Disconnected
Hooked up my new minitaur last night and ran into this problem exactly. It's a no go in Logic & Standalone.
Appreciate a fix as well.
Appreciate a fix as well.
Re: Minitaur Editor - Hardware Disconnected
A little birdie told me that there's a bug fix update to the new editor being released any day now.
Re: Minitaur Editor - Hardware Disconnected
Same problem here.
I updated the firmware (I think so, anyway, the lights blinked as they were supposed to throughout the process)
Still same problem. Both in stand alone x64, and as a VST in Ableton Live 9 Standard.
I updated the firmware (I think so, anyway, the lights blinked as they were supposed to throughout the process)
Still same problem. Both in stand alone x64, and as a VST in Ableton Live 9 Standard.
Re: Minitaur Editor - Hardware Disconnected
Same problem here! Thank god I found this thread as I was really struggling to get info on this online. Does anyone know if the update is ready yet? THANKS!
Re: Minitaur Editor - Hardware Disconnected
I have the the problem here. Hello moog, any news about a bug fix?
-
- Posts: 1
- Joined: Fri Apr 25, 2014 5:39 pm
Re: Minitaur Editor - Hardware Disconnected
Same problem here
i almost went to return my minitaur... as I thought it was faulty
very annoying as I can't save my presets
i almost went to return my minitaur... as I thought it was faulty
very annoying as I can't save my presets
Re: Minitaur Editor - Hardware Disconnected
same problem here, I already contacted support team and I am waiting for their response.
Re: Minitaur Editor - Hardware Disconnected
I have just bought a new Minitaur and I am also having the "hardware disconnected" situation. I seem to have related issues - the firmware version in the editor's settings never gets out of the "discovery phase" and really the worst problem for me is that although the minitaur hardware has the Rev2 decay/release control working, there appears to be no presets whatsoever even after reinstalling the Rev2 firmware (multiple times!) Is this the same situation for everyone else here or do you have the factory presets installed but cannot do anything with them because of the preset section of the editor not connecting with hardware?
I would appreciate any information before I have to run the gauntlet of returning the minitaur. I have to say that I am bit disappointed that Moog would leave people hanging with this situation.
I would appreciate any information before I have to run the gauntlet of returning the minitaur. I have to say that I am bit disappointed that Moog would leave people hanging with this situation.