Minitaur noisy volume pot, anyone else ?

[mydni]

Hi,
I know we're in the analog domain but my volume pot is really noisy.
Impossible to make a nice volume fade in.
Anyone else has experienced this ?
Thks for your help.
Greg

[bichuelo]

try changing the value of the Attack on the Amplifier section before you press a note on your keyboard, that should give you a nice fade in

[mydni]

Thks for the tip bichuelo but sometimes, especially in live situation you just have/want to play with the volume not the envelope.
In this case, my minitaur is a no go, it really makes some audible scratchy noises as I turn the volume knob up/down.
Just want to know wether mine has a problem, is yours doing the same (or anyone else) ?
Thks for your help.

[greenborder]

I never heard any glitches while moving the master volume.

[mydni]

Thks greenborder.
That's what I thought, not normal, my minitaur has a problem.

[greenborder]

Thks greenborder.
That's what I thought, not normal, my minitaur has a problem.

Tough luck mate, hope it can be taken care of - otherwise you might want to connect it to a mixer and do the fading from there?

[renzo]

Helly Mydni,

I actually have the same issue now, it's a new thing, I don't remember having this before...
Did you sort that out?

Cherio

[slabwax]

late to the dance, but mine has started doing it also.

[dshook]

Check and make sure your controller is not sending CC#7 as you are adjusting the volume pot, this can cause symptoms that seem a LOT like a bad pot.

[renzo]

Hi there,

As I was saying, I got mine serviced. Here is what the rep says about what we done to it:

"replaced a potentiometer and re-glued ribbon"

Now works like a charm...

Cheers

[numbersix_ca]

I had the same issue, and was fooled because the headphone output didn't seem to be making a noise when the pot was moved. I emailed Moog and received a prompt comprehensive reply from Adam. He recommended applying the contact cleaner anyway, and in 45 seconds my Minitaur was producing a marvelous clean output with smooth volume response. Hooray!

Long Live Moog!
Bruce

[richardlodge]

Hi all,

Think I'm suffering a similar problem. Noisy pot, but also I'm getting quite a lot of noise on top of each note I play.. ok well note a huge amount of noise but I'm sure it's not normal.

I made a quick recording

https://soundcloud.com/richard-lodge/mo ... st/s-xZYJ2

You can specially hear as the longer notes fade away.

Do you guys think a bit of contact cleaner would help (is so applied where?) or should I get it serviced?

Thanks
Richard

[iDanielSan]

Hey, i have been experiencing the noisy volume pot myself in a while, any advice will be appreciated. I've made a quick recording: https://soundcloud.com/danioan/minitaur2 - this is with a note playing and this https://soundcloud.com/danioan/minitaur is only with the pot turning. i am very concerned as the Minitaur is my main bass synth