Hi Everybody,
When I play the Minitaur via CV/GATE from my LP, I only get maybe an octave of pitched notes. Yes, CV and GATE going out of my LP into CV and GATE in on my Minitaur. Am I missing something here?
Thanks!
Issues controlling Minitaur from LP via CV/GATE
Issues controlling Minitaur from LP via CV/GATE
Moog Mother 32 System | MF104m | MF105m | MF107 | MF108m | CP251 | Moog Etherwave Theremin | Moog Amplifier
Re: Issues controlling Minitaur from LP via CV/GATE
What octave range are you playing? Dumb of me to ask because I think it's implied that you have the CV out on your Phatty so the question is, are you going straight into the Minitaur or through an attenuator?
In any case, if you are at the upper end of the playable range of the Minitaur then you will only get an Octave. Try pressing the octave down buttons on your Phatty to the lowest point and see if that changes anything?
In any case, if you are at the upper end of the playable range of the Minitaur then you will only get an Octave. Try pressing the octave down buttons on your Phatty to the lowest point and see if that changes anything?
'76 Minimoog, Taurus 3, Oberheim FVS + Son of 2-voice; Sequential ProOne; Juno 106; Moog Model 15; Kurzweil 250; Hammond M3; and a handful of Fender Basses Flickr!