help with MP-201

This is the place to share tips, tricks and questions about Moog's controller products; the MP-201 Multi-Pedal and the EP-2. There are a world of applications for these expression enhancers. Explore...
Post Reply
Posts: 479
Joined: Thu Aug 31, 2006 6:04 pm
Location: Ballard

help with MP-201

Post by slabwax » Tue Oct 11, 2011 4:47 pm

First I did use the search function.

Now to the question. Is it possible to use a midi device (Roland hpd-10) to control pitch of a non midi synth (Tom O. SEM patch panel ) via a MP-201? I suck at midi and tried to no avail yesterday. Don't know if it's a doable thing and I'm just not clever enough or it's impossible and time to rethink things I tried midi out of handsonic midi in of mp-201 cv out to SEM. Thanks for the help


Posts: 154
Joined: Tue Nov 04, 2008 1:08 pm

Re: help with MP-201

Post by cliffman » Wed Oct 12, 2011 12:48 pm

I've done this, was quite easy - if you have v2 or greater firmware, just set one channel as 'midi to cv' - the messy details are in the v2 addendum doc. You may need another
channel set as Gate, depends on what you wish to do.

Post Reply