multimoog missing osc b pcb

In a Moog Mood? Here's a forum for discussion of general Moog topics.
Post Reply
jollyal
Posts: 2
Joined: Sun Mar 05, 2017 1:05 pm

multimoog missing osc b pcb

Post by jollyal » Sun Mar 05, 2017 1:45 pm

I've been bouncing around forums looking for advice. I'm the proud owner of a maimed multimoog -- it's missing the "tandem printed board" with oscillator B. It is essentially a micromoog with a bigger keyboard.

Any recommendations for getting a new PCB made? I've never had a pcb made. Not sure how to convert these schematics into something usable for a manufacturer like Olimex, http://www.4pcb.com/, https://oshpark.com/ ...

here are the schematics:

http://www.fantasyjackpalance.com/fjp/s ... oard_1.gif
http://www.fantasyjackpalance.com/fjp/s ... oard_2.gif

I'm wondering if anyone out there made project files usable for these manufacturers, like a CAD file or anything?
and, I'm feeling around in the dark, would you say this is this the best route to take to restore this multimoog?

I gotta admit, it sounds great as a micromoog, but I'm sad to see all these empty holes in the faceplate.

electrojoe
Posts: 38
Joined: Sun Feb 04, 2007 10:15 pm

Re: multimoog missing osc b pcb

Post by electrojoe » Tue Mar 07, 2017 9:09 am

Hello,
You might be missing more than the tandem board if you have open holes in the top of the unit.
There are 2 small circuit boards in the Multimoog.
One is the tandem board and the other is the (pot/switch) top board.

You will need them both.

Good luck on your search/project.

GD

jollyal
Posts: 2
Joined: Sun Mar 05, 2017 1:05 pm

Re: multimoog missing osc b pcb

Post by jollyal » Wed Mar 08, 2017 6:29 pm

Yes! I am missing the tandem and top board. I'm in the process of developing CAD files and parts lists.

Right now I'm wondering what the differences are between the Micro and Multi's main pcbs. I also have read that the filter on the micromoog was driven more than on the multimoog, and that the manufacturers changed it to accommodate for more power into the filter from a 2nd oscillator. I'm not sure how valid this is, or what is truth or internet truth.

Anyways -- if anyone knows the differences on the main pcbs between micro and multi, that will be helpful in my ill-advised detour in synthesizer rehabilitation.

Sliman
Posts: 1
Joined: Fri Oct 13, 2017 3:41 am

Re: multimoog missing osc b pcb

Post by Sliman » Fri Oct 13, 2017 3:44 am

I recommend Seeed Studio forPCB fabrication and assembly!
Their prices are the best and they offer online gerber viewer, and they will do assembly if you need it.

sunny pedaal
Posts: 518
Joined: Sun Dec 02, 2007 2:42 pm
Location: netherlands

Re: multimoog missing osc b pcb

Post by sunny pedaal » Fri Oct 13, 2017 8:59 am

why not sell it and buy a complete one.
with the small price difference between micro and multi , you might be out cheaper and with much less hassle..

Post Reply