Model D board maintenance
Model D board maintenance
Not often I remove the boards on my model D (ser.nr. 11966), but I have to change glide potentiometer, and there isn´t much space to do it with the boards in place. So, while I have two boards removed, should I clean the contacts or anything? If so, what should I use to do that?
-
- Posts: 90
- Joined: Tue Jan 26, 2010 9:48 pm
- Location: New York City metro area
Re: Model D board maintenance
You can clean the gold "fingers" with a soft swap dipped in 90%+ pure isopropyl alcohol but it's probably more important to make sure all the fingers still have a firm grip on the boards and are in good alignment. Whenever you open up old gear it's also always good to remove any debris inside and to fix any loose connections, dangling unconnected wires, and bad solder joints.
Akai AX-80
Korg Polysix
Roland Juno 60
Moog The Source
Yamaha e1010 BBD
Moog Parametric EQ
Sequential Prophet Pro~One
Altec AS-1600 audio oscillator (1947)
Moog Music Minimoog Model D (1973)
Korg Polysix
Roland Juno 60
Moog The Source
Yamaha e1010 BBD
Moog Parametric EQ
Sequential Prophet Pro~One
Altec AS-1600 audio oscillator (1947)
Moog Music Minimoog Model D (1973)