Tell us about your rig
Hahahaha, thanks! I bought it for $10 at a garage sale and when my Rhodes was in another room it was my only way to hear it. Now I have a bigger studio and I am not even using the Crate at all.
MemoryMoog Plus (with Kenton Midi Upgrade Kit) MF-101 Lowpass Filter, MF-102 Ring Mod, MF-103 Stage Phaser, MF104M Delay, MF-105M MIDI MuRF, MF-107 Freq Box, MF-108M ClusterFlux and CP-251 Control Processor.
That tends to happen to those crate amps. I think my sister was given one and she gave it away. The only use I could see for one would be as a drink holder. Maybe to prop up one of those old console tv's lolololol
We could start a thread (on the crate forum) about the best uses for that amp lololololol. No actually its a great trainer amp.
Eric
We could start a thread (on the crate forum) about the best uses for that amp lololololol. No actually its a great trainer amp.
Eric
Support the Bob Moog Foundation:
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
I bought one of those for one of my friends who was given an electric guitar...or maybe it was an eclectic guitar...an old three pickup Yamaha. Anyway, the handle had been replaced by a handle from a clothing iron. Sounded real mean for it's size...I think I paid $20 for it and a cable.
Minitaur, CP-251, EHX #1 Echo, EHX Space Drums/Crash Pads, QSC GX-3, Pyramid stereo power amp, Miracle Pianos, Walking Stick ribbon controller, Synthutron.com, 1983 Hammond organ, dot com modular.
- AlakaLazlo
- Posts: 77
- Joined: Mon May 04, 2009 7:18 pm
- Location: Los Angeles, CA
- Contact:
- latigid on
- Posts: 1579
- Joined: Mon Jan 30, 2006 3:47 pm
- Location: Auckland, New Zealand
Very nice well rounded collection there. I like the matching congas/djembe.
What is the modular looking recording console?
Do you have the hand drum triggering envelopes and such?
Eric
What is the modular looking recording console?
Do you have the hand drum triggering envelopes and such?
Eric
Support the Bob Moog Foundation:
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
- AlakaLazlo
- Posts: 77
- Joined: Mon May 04, 2009 7:18 pm
- Location: Los Angeles, CA
- Contact:
Ozy; Believe it or not, I have a more than a few cowbells laying around somewhere. A few have more rust on them than I do.... One Halloween about 5 years ago, I wore 8 of them around my neck and went as Chris Walken.
Eric; The hand drums are Latin Percussion Giovanni series. Siam Ash wood, buffalo skins and really awesome tone. My favorites ever. The console is an old Mackie control with an extender on the left, a C4 on the right, and a M-Audio Radium keyboard controller in front.
I use the Handsonic as a hand drum midi triger through my Expressionist 8 channel midi>CV converter. I have both the Moog and DotCom envelope followers, but with only 2, its hard to mike up the whole kit. But I do sometimes use one on the requinto or the smaller djembe which have the crispest tones and are the easiest to get the most tones out of. I'm going to look into midi triggers early next year when I have a bit of time.
Eric; The hand drums are Latin Percussion Giovanni series. Siam Ash wood, buffalo skins and really awesome tone. My favorites ever. The console is an old Mackie control with an extender on the left, a C4 on the right, and a M-Audio Radium keyboard controller in front.
I use the Handsonic as a hand drum midi triger through my Expressionist 8 channel midi>CV converter. I have both the Moog and DotCom envelope followers, but with only 2, its hard to mike up the whole kit. But I do sometimes use one on the requinto or the smaller djembe which have the crispest tones and are the easiest to get the most tones out of. I'm going to look into midi triggers early next year when I have a bit of time.
You know, my congas are TJ percussion and made of strips of plywood. They look like pirate pants. I have LP Matador Bongos, and I love those but not quite like some regular LP's or even some especials if you know what I mean.
For triggering, I think im going to try to get some contact mics hooked up to a bass drum and snare and perhaps those hooked to envelope followers will let you get dynamic. The envelope follower could then be inverted or multiplied then inverted and processing stuff like filters on your cymbals or toms, all controlled by the dynamics of your bass and snare. I think trigger delays would work even better here. I hope Moog builds some current model ones.
Nice setup!
Eric
For triggering, I think im going to try to get some contact mics hooked up to a bass drum and snare and perhaps those hooked to envelope followers will let you get dynamic. The envelope follower could then be inverted or multiplied then inverted and processing stuff like filters on your cymbals or toms, all controlled by the dynamics of your bass and snare. I think trigger delays would work even better here. I hope Moog builds some current model ones.
Nice setup!
Eric
Support the Bob Moog Foundation:
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
Re: Tell us about your rig
I had to resurect this old thread to show of some new stuff. A few things mising still.
Eric
Support the Bob Moog Foundation:
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
Re: Tell us about your rig
Nice rigs.
More cowbell!
More cowbell!
Little Phatty TE #1023 • Schrittmacher • Walking Stick ribbon • Korg microXL/Electribe MX/KaossPro • Sonnus G2M
MF-101 Filter • MF-102 Ring • MF-103 Phaser • MF-104Z Delay • MF-105 MuRF • MF-107 FreqBox • MF-108M Cluster • Etherwave
_/_/_/_/_/_/_/_/
MF-101 Filter • MF-102 Ring • MF-103 Phaser • MF-104Z Delay • MF-105 MuRF • MF-107 FreqBox • MF-108M Cluster • Etherwave
_/_/_/_/_/_/_/_/
-
- Posts: 441
- Joined: Wed Aug 12, 2009 10:34 am
- Location: Edmonton, AB
- Contact:
Re: Tell us about your rig
Wow! Erick buddy, you got your Taurus! Congrats... looks amazing on it's own, let alone altogether in your setup
Moog Voyager RME / Moog LP SE 2 / Nord Rack 1 / Microkorg / Korg ER-1 / Triggerfinger / Rocktron Banshee talk box / Ableton live / Guru / Lots of non-electric musical instruments.
- soundxplorer
- Posts: 237
- Joined: Fri May 02, 2008 8:07 pm
Re: Tell us about your rig
Just finished building a frame so my Eurorack modular can play nice with the Moogerfoogers. I'm still waiting for Moog to release another CP-251 style unit to fill that hole.
I also have a Little Phatty that wasn't around for the photo shoot.
I also have a Little Phatty that wasn't around for the photo shoot.
Gear: Moog LP, Gibson LP, lots of FX
Re: Tell us about your rig
Get another 251!soundxplorer wrote:Just finished building a frame so my Eurorack modular can play nice with the Moogerfoogers. I'm still waiting for Moog to release another CP-251 style unit to fill that hole.