Fixed Filter inductors
-
- Posts: 163
- Joined: Fri Dec 16, 2011 8:17 am
- Location: Derbyshire England
Fixed Filter inductors
I need some advice on inductor values. I've never really worked with these and I'm a bit confused over their values . On the 907 schematics values go from 5H to 150 mH. There are some available from Hong Kong but their listed as 100 mH. What I need to know is would say 10 of these in series make 1 H ? Not that I will do it like this I just need to decipher the values as there are milli and micro Henry's ..now are these the same values? There's also u and n values ..all confusing. If any one knows of a supplier of large inductors....that would be pretty good.
Re: Fixed Filter inductors
From this site: http://www.allaboutcircuits.com/vol_1/chpt_15/4.html
When inductors are connected in series, the total inductance is the sum of the individual inductors' inductances.
When inductors are connected in parallel, the total inductance is less than any one of the parallel inductors' inductances.
When inductors are connected in series, the total inductance is the sum of the individual inductors' inductances.
When inductors are connected in parallel, the total inductance is less than any one of the parallel inductors' inductances.
John L Rice
MiniMoog, MinitMoog, MG-1, Sub Phatty, 5U modulars, Eurorack modulars
MiniMoog, MinitMoog, MG-1, Sub Phatty, 5U modulars, Eurorack modulars