PCB rear panel mount width dimension?

In a Moog Mood? Here's a forum for discussion of general Moog topics.
Post Reply
rarecomponent
Posts: 163
Joined: Fri Dec 16, 2011 8:17 am
Location: Derbyshire England

PCB rear panel mount width dimension?

Post by rarecomponent » Sun Jul 28, 2013 2:14 pm

Moog Modular modules.....does anyone have the width dimension of the ] shaped panel which holds the PCB in place at the back of the front control panel? I mean the large one that wraps around the PCB. My guess is either 45 or
50mm ?

User avatar
CZ Rider
Posts: 586
Joined: Thu Jul 14, 2005 12:13 am
Location: Southeastern, PA

Re: PCB rear panel mount width dimension?

Post by CZ Rider » Sun Jul 28, 2013 2:53 pm

I get about 1.885 inches or 47.879 millimeters. About 6" deep and 7 5/8" high, and .064" thick metal. The small mounting holes on the front panel are 1 1/2" apart. I could use a pair of those "C" frames myself.
1P Modular,Minimoog,VoyagerRME,CustomMinimoog,Prodigy,MG-1 TaurusII,Opus3,Rogue,Source,Liberation,Micromoog,1125S&H,
1130Perc.x2,1150Ribbonx2,Custom1150,1120Pedal,Songprod,CP-251,VX-351
VX-352,Etherwave,Synampx2,Lil'Phatty,Sonic Six

rarecomponent
Posts: 163
Joined: Fri Dec 16, 2011 8:17 am
Location: Derbyshire England

Re: PCB rear panel mount width dimension?

Post by rarecomponent » Sun Jul 28, 2013 4:32 pm

Thanks CZ.... Your info as usual is very comprehensive and is much appreciated. I will be able to fabricate the "C" panels no probs if your interested. But the slot in the back where the PCB terminals pop thru is quite a problem without some sort of punch out machine. I've omitted this and use mini din connectors.

Analogue
Posts: 14
Joined: Thu Aug 19, 2004 4:30 pm
Location: Los Angeles, California

Re: PCB rear panel mount width dimension?

Post by Analogue » Wed Jul 31, 2013 12:33 pm

I have C-frames if anyone is interested. I had them made up a few years ago by a local metalshop from an original mechanical drawing. They are black anodized.

Post Reply