In a Moog Mood? Here's a forum for discussion of general Moog topics.
4 posts • Page 1 of 1
Moog Modular modules.....does anyone have the width dimension of the ] shaped panel which holds the PCB in place at the back of the front control panel? I mean the large one that wraps around the PCB. My guess is either 45 or
I get about 1.885 inches or 47.879 millimeters. About 6" deep and 7 5/8" high, and .064" thick metal. The small mounting holes on the front panel are 1 1/2" apart. I could use a pair of those "C" frames myself.
1P Modular,Minimoog,VoyagerRME,CustomMinimoog,Prodigy,MG-1 TaurusII,Opus3,Rogue,Source,Liberation,Micromoog,1125S&H,
Thanks CZ.... Your info as usual is very comprehensive and is much appreciated. I will be able to fabricate the "C" panels no probs if your interested. But the slot in the back where the PCB terminals pop thru is quite a problem without some sort of punch out machine. I've omitted this and use mini din connectors.