Hi all...new to the forum!
Dose anyone have any experience using Moog gear with Analogue Solutions (Oberkorn3)?
Differing patch point sizes 6.35 (1/4 jacks) to 3.5 (1/8 jacks) aside from the patch conecters do i need to be comcerned about voltage differences???
Can I at least patch out from the Oberkorn and run timecode and trigure to the Minitaur/CP-251?
would love some advice!!!
Moogf Minitaur, CP-251 & EP-2 with Analogue Solutions Oberko
Re: Moogf Minitaur, CP-251 & EP-2 with Analogue Solutions Ob
Ok...
No worries about control voltage clashing. Spoke with moog and AS.
Just hunting for cables!
The minitaur controlled but the sequencer is brilliant. Cut of flares get nice and growlie
Have had weird problems running the minitaur wih midi, it maps to my novation 25sl and the so interface mucks around with the sound!
I just want it to run straight, mod/pitch / keys / octave
Non of those pesky sliders and knobs from the SL ?????
Anyone
No worries about control voltage clashing. Spoke with moog and AS.
Just hunting for cables!
The minitaur controlled but the sequencer is brilliant. Cut of flares get nice and growlie
Have had weird problems running the minitaur wih midi, it maps to my novation 25sl and the so interface mucks around with the sound!
I just want it to run straight, mod/pitch / keys / octave
Non of those pesky sliders and knobs from the SL ?????
Anyone
Re: Moogf Minitaur, CP-251 & EP-2 with Analogue Solutions Ob
Well I'm glad I can post my own reply I guess. I'll put them up cause they might help
Someone else out!
Turn out that I had to reprogram a spot in my novation with all controls except mod/pitch set to off.
An annoying event, but a process of illumination pin pointed the issues of lack of control being to much control!
Sorted. Cheers.
Pretty sure the AS Oberkorn won't trigure from midi
And so the gear hunt continues...
Someone else out!
Turn out that I had to reprogram a spot in my novation with all controls except mod/pitch set to off.
An annoying event, but a process of illumination pin pointed the issues of lack of control being to much control!
Sorted. Cheers.
Pretty sure the AS Oberkorn won't trigure from midi
And so the gear hunt continues...
Re: Moogf Minitaur, CP-251 & EP-2 with Analogue Solutions Ob
Yep. No midi out on the oberkorn.
Re: Moogf Minitaur, CP-251 & EP-2 with Analogue Solutions Ob
I was wanting to tempo sync the oberkorn with my moc2500. The oberkorn has a midi in, still mucking around with it! Waiting on patch cables!