I bought a Behringer Xenyx 802 just last week for the incredible amount of 52 bucks. Not bad at all. Build quality and finish is impressive for a mixer this price. What sold me on it, besides the looks and low cost, is the FX send level for each channel. At any rate, it is less noisy than the mixer it replaces and that was twice the price. For what I am using it for, I would say it's a good bargain.Voltor07 wrote:Friends don't let friends buy Behringer. The build quality is horrible. For studio use, their stuff is ok, but stay away from their mixers and patchbays...they'll just fall apart.
Post your latest purchase!!
- Portamental
- Posts: 888
- Joined: Fri Jan 23, 2009 8:53 am
Re: Post your latest purchase!!
Re: Post your latest purchase!!
It seems to be hit or miss with them. The quality control seems to be the main issue with Behringer. I tested the same model amp I use for my USB turntable in a music store, and the floor model suffered from scratchy pots and intermittent jacks. Like mine, it sounded pretty good, other than the mechanical issues. The guy said, "You can have this unit for $60. We go through five of these floor models a week,"
Mine has no mechanical issues, but then, I don't adjust the volume much, and it never leaves the corner of the room it's in, nor do I unplug the turntable from it ever.
$52 for a new ANYTHING is a bargain as far as mixers go. good call!
Mine has no mechanical issues, but then, I don't adjust the volume much, and it never leaves the corner of the room it's in, nor do I unplug the turntable from it ever.
$52 for a new ANYTHING is a bargain as far as mixers go. good call!
Minitaur, CP-251, EHX #1 Echo, EHX Space Drums/Crash Pads, QSC GX-3, Pyramid stereo power amp, Miracle Pianos, Walking Stick ribbon controller, Synthutron.com, 1983 Hammond organ, dot com modular.
Re: Post your latest purchase!!
Just for the record, I have Behringer RX1602 mixer that I feed my Alesis drums, a few effects returns and 3 channels of JoMoX drums into before it gets routed into my main board. It's actually as good as any chinese made mixer for the price. Has not fallen apart, is quiet and has alot of features in 1U.
Then I have a $1,800 Allen & Heath mixer that I am thankful that I had the $$ for (at the time). When it arrived it head a flaky Pan pot and had to be replaced. Unless you are spending thousands and thousands of dollars, don't be fooled into thinking you are getting rock solid quality just because of a name or a price tag.
Then I have a $1,800 Allen & Heath mixer that I am thankful that I had the $$ for (at the time). When it arrived it head a flaky Pan pot and had to be replaced. Unless you are spending thousands and thousands of dollars, don't be fooled into thinking you are getting rock solid quality just because of a name or a price tag.
'76 Minimoog, Taurus 3, Oberheim FVS + Son of 2-voice; Sequential ProOne; Juno 106; Moog Model 15; Kurzweil 250; Hammond M3; and a handful of Fender Basses Flickr!
Re: Post your latest purchase!!
The only Chinese mixer I have ever had satisfaction with was my friend's Pyle Pro...Pyle has a reputation for well-built and affordable professional gear, with great customer service. http://www.parts-express.com/pe/showdet ... r=248-4362
Minitaur, CP-251, EHX #1 Echo, EHX Space Drums/Crash Pads, QSC GX-3, Pyramid stereo power amp, Miracle Pianos, Walking Stick ribbon controller, Synthutron.com, 1983 Hammond organ, dot com modular.
-
- Posts: 396
- Joined: Wed Oct 19, 2011 2:55 pm
Re: Post your latest purchase!!
my latest purchase: the components for the Moog Ladder Filter i'm building a modular clone
- thealien666
- Posts: 2791
- Joined: Mon Nov 14, 2011 8:42 pm
- Location: Quebec, Canada
Re: Post your latest purchase!!
That's great! I love DIY.
What capacitor values have you chosen to put in the ladder ?
What capacitor values have you chosen to put in the ladder ?
Moog Minimoog D (1975)
DSI OB6
DSI Prophet REV2
Oberheim Matrix-6
Ensoniq SQ-80
Korg DW8000
Behringer DeepMind 12
Alesis Ion
DSI OB6
DSI Prophet REV2
Oberheim Matrix-6
Ensoniq SQ-80
Korg DW8000
Behringer DeepMind 12
Alesis Ion
Re: Post your latest purchase!!
Today the little bull arrived.
Re: Post your latest purchase!!
thealien666 wrote:That's great! I love DIY.
What capacitor values have you chosen to put in the ladder ?
i use 47nF caps matched to 1%... i haven't measured them so they aren't on the board as you can see... and since transistors are really instable to temperature i used CA3046 quad transistor array. In fact the three couples are matched by pairs and thermocoupled to improve stability
Gear: Korg M50-88, YuSynth Modular (in progress)
- xombiexplox
- Posts: 93
- Joined: Sun Feb 12, 2012 3:56 pm
Re: Post your latest purchase!!
PLEASE post more pictures of this as it gets closer to completion! I love this stuffmuna93 wrote:my latest purchase: the components for the Moog Ladder Filter i'm building a modular clone
GEAR: Slingshot, yo-yo, baseball cap, heaphones, gummi wormz
- xombiexplox
- Posts: 93
- Joined: Sun Feb 12, 2012 3:56 pm
Re: Post your latest purchase!!
Order is processed, but it still hasn't shipped!!!
GAH!
GEAR: Slingshot, yo-yo, baseball cap, heaphones, gummi wormz
Re: Post your latest purchase!!
yes indeed. today i ordered the components for 2 VCOs, 1LFO, 2ADSRs and 1VCA...xombiexplox wrote:PLEASE post more pictures of this as it gets closer to completion! I love this stuffmuna93 wrote:my latest purchase: the components for the Moog Ladder Filter i'm building a modular clone
Gear: Korg M50-88, YuSynth Modular (in progress)
Re: Post your latest purchase!!
Not a very close clone, is it? Where are the hand-matched transistor pairs? All I see are IC sockets.muna93 wrote:my latest purchase: the components for the Moog Ladder Filter i'm building a modular clone
www.youtube.com/watch?v=8i_TqNc0TXU Pause between 3:08 and 3:10. This is how the Minimoog Ladder Filter was designed. The modular 904, also in the Taurus, was a little different. At any rate, you won't find a single IC in either circuit.
Minitaur, CP-251, EHX #1 Echo, EHX Space Drums/Crash Pads, QSC GX-3, Pyramid stereo power amp, Miracle Pianos, Walking Stick ribbon controller, Synthutron.com, 1983 Hammond organ, dot com modular.
Re: Post your latest purchase!!
Nice to see you have some action on your synth.
Support the Bob Moog Foundation:
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
https://moogfoundation.org/do-something-2/donate/
I think I hear the mothership coming.
Re: Post your latest purchase!!
I got a Q137 power module yesterday, but it seems to be faulty. I already replaced the fuse holder with one from my parts bin, and now it's not powering anything. Got an e-mail out to Roger. Also got a Q110 noise source. One or two modules a pay period is all I can afford, though.EricK wrote:Nice to see you have some action on your synth.
Minitaur, CP-251, EHX #1 Echo, EHX Space Drums/Crash Pads, QSC GX-3, Pyramid stereo power amp, Miracle Pianos, Walking Stick ribbon controller, Synthutron.com, 1983 Hammond organ, dot com modular.