Power supply questions

The Moog Forum Moogerfooger Forum
1

I just bought the ringmod and the freqbox from a music store here in Sweden. It seems the power supplies are not included in europe any more but the dealer gave me two regular boss style adapters. The ringmod worked fine but the freqbox didn’t work at all… The LED flickered but it didnt make any sounds. I then tried the adaptor from my MF104 and then everything worked

The power supplies I got were 1500ma but I was told that a higher value than the 300ma stated in the manual would’n be a problem!? I tried the new supply with my old MF105 breifly but I got a lot of hum and noises. Does in have to be exactly 300ma?

thanks
/mikael

2

Boss adapters are usually tip negative. The Moog adapters I have are tip positive. They should be 9V DC, my LPF adapter is 300mA, my FreqBox adapter is 500mA and the CP is 200mA (more milliamps are fine, you don’t want the milliamps to be less than what the pedal requires). Also 1A=1000mA. Hope this helps.

3

And because the MuRF has a digital processor, you should really use a regulated supply for it.