Hi, I’m a musician/producer recently moved to the far Northwest of Scotland. I’ve had this Prodigy for many years and used it on many recordings. Setting up the studio and it’s been in storage for several years…tuning seemed very tricky so followed advice here http://www.davidmorrin.com/home/trouble/trouble-keyboards/moog-prodigy/tuning and it seems one of the temp chips has gone, I can’t get tuning sorted on whatever oscillator I swap one of the chips to. So I’ve ordered a few of the chips, great. However one of the wires to the rear panel sockets is disconnected too the yellow one…goes to vcf in on the board, so you would expect it to go to the vcf jack but I’m not sure, any advice and for tests on a non working pitch bend wheel? (Still works in osC sync mode!)
Any responses greatly appreciated!