Following my previous posts on this subject..
using the latest version 9.47/1.125 the slope values change correctly,when recorded and payed back in Logic X, but the arp range is still not played back correctly.
Stepping through the octave values in record mode misses -1 and +2 when played back.
0.67 gives +1
0.83 should give +2 but doesn’t change from +1 when stepping up and goes from +3 to +1 when steeping back down through the values.
1.0 gives +3
0.5 gives 0
0.33 gives -2 i.e. misses -1
0.17 gives -2
0.00 gives -3
i.e. by recording through the buttons it is not possible to select either -1 or +2 octaves
Not a biggie.. but it’s there…