Search found 117 matches
- Mon Feb 22, 2016 11:34 am
- Forum: Subsequent 37 & Subsequent 25
- Topic: Sub37 - Have you had this much trouble with other synths?
- Replies: 15
- Views: 10301
Re: Sub37 - Have you had this much trouble with other synths
Do you mean the main board? And hearing that the headphone output fault is a PCB and knowing the only PCB other than the control panel is the mainboard looks like I'm going to have to get that sent back too? headphone out is fed from the main board thru the 2 ribbon cables in the panels boards, so ...
- Mon Feb 22, 2016 11:22 am
- Forum: Moog Semi-Modular Analog Synthesizers
- Topic: new Mother 32- loose midi plug
- Replies: 2
- Views: 1897
Re: new Mother 32- loose midi plug
I would open it up & flip the panel over to verify the screws are still in the stand-offs. Do you have loose sounds rattling inside? Should be user serviceable...
- Thu Feb 18, 2016 10:14 am
- Forum: Little Phatty & Slim Phatty Forum
- Topic: Defective Little Phatty II
- Replies: 4
- Views: 3242
Re: Defective Little Phatty II
Guys any help with that issue? Thanks have you considered contacting Moog service directly and asking them? Andy Hughes, Service Manager andy@moogmusic.com 828-251-0090 xt 221 Nate Marino natemarino@moogmusic.com xt. 204 Taylor Mott taylor@moogmusic.com xt. 217 have you registered your product in t...
- Wed Feb 17, 2016 5:04 pm
- Forum: Taurus, Minitaur & Sirin
- Topic: any news on the new minatuar firmware & editor
- Replies: 15
- Views: 9182
Re: any news on the new minatuar firmware & editor
see recent comments from Amos regarding Sub37 editor & developer resources for Subphatty updates (likely applies to Minitaur as well): http://forum.moogmusic.com/viewtopic.php?f=7&t=24627#p151915 we're only waiting to begin beta-testing it until Sub 37 Editor is released... which is behind s...
- Tue Feb 16, 2016 3:34 pm
- Forum: Little Phatty & Slim Phatty Forum
- Topic: Midi in jack too recessed. Self fixable?
- Replies: 2
- Views: 2300
Re: Midi in jack too recessed. Self fixable?
The top midi out jack is an integrated part of the left side shield & cannot be adjusted. The bottom midi in jack is an integrated part of the main sound PCB & cannot be adjusted. Suggested Instructions below: 1 - Register your Moog unit at http://www.moogmusic.com/content/register-product 2...
- Tue Feb 16, 2016 3:01 pm
- Forum: Minimoog Forum
- Topic: New Voyager - knobs turn off center/axis. Normal?
- Replies: 3
- Views: 1981
Re: New Voyager - knobs turn off center/axis. Normal?
normal - the alpha pots can have some variation in the center of the shaft
- Fri Feb 12, 2016 11:43 am
- Forum: Moog Music General Topics Forum
- Topic: RUMORS - not of the Fleetwood Mac nature
- Replies: 20
- Views: 17997
Re: RUMORS - not of the Fleetwood Mac nature
PSE/EB/RME/OS/Aluminum Voyager discontinued. End of Life announcement correlated to the last 600 units for sale
XL production still going for an undetermined period of time...
XL production still going for an undetermined period of time...
- Wed Feb 10, 2016 9:26 am
- Forum: Moogerfooger Forum
- Topic: 104M available!
- Replies: 8
- Views: 5787
Re: 104M available!
104M has been discontinued. False, production is suspended until more chips are found. I bought 2 new ones in September 2015. They've run out of the chips needed for the delay. True, production is suspended until more chips are found. source http://www.moogmusic.com/news/mf-104m-analog-delay-produc...
- Fri Feb 05, 2016 2:52 pm
- Forum: Minimoog Forum
- Topic: Faulty TI chips in Voyager Old School?
- Replies: 18
- Views: 15828
Re: Faulty TI chips in Voyager Old School?
see this thread http://forum.moogmusic.com/viewtopic.php?f=2&t=21943&start=45 and also muffwiggler comments https://www.muffwiggler.com/forum/viewtopic.php?t=132904&start=all&postdays=0&postorder=asc&sid=00392c2bd8313c635ea62ab924fce4fc Dear Registered Owner of the Minimoog V...
- Tue Feb 02, 2016 7:24 pm
- Forum: Modular Forum
- Topic: Technical Limitations of Moog Modular Synthesiser
- Replies: 10
- Views: 6760
Re: Technical Limitations of Moog Modular Synthesiser
check original manuals over at http://www.synthfool.com/docs/Moog/modular/ you might search for the original 1981 ‘The Moog Modular Synthesizer Owner’s Manual’, 190pgs. I only have a PDF. It is an unabridged copy of the 1981 manual by Dan Wyman. It still carries the 1981 Copyright to Moog Music, Inc...
- Tue Feb 02, 2016 11:27 am
- Forum: Taurus, Minitaur & Sirin
- Topic: Minitaur and Mother 32 PSU - are they the same?
- Replies: 2
- Views: 2259
Re: Minitaur and Mother 32 PSU - are they the same?
yes, both are 12V center pin positive
- Mon Feb 01, 2016 10:34 am
- Forum: Subsequent 37 & Subsequent 25
- Topic: How much to replace SUB 37 Filter pot?
- Replies: 7
- Views: 2888
Re: How much to replace SUB 37 Filter pot?
hi paramnesia in your case re:swapout the front panel board with the filter knob, did they just send you the board to do yourself? im fairly handy with a soldering iron i could do this myself also. Would like to know how i go about getting the board sent out. Happy to pay for the postage to send to...
- Thu Jan 28, 2016 6:18 pm
- Forum: Moog Semi-Modular Analog Synthesizers
- Topic: Using Mother 32 with Moogerfooger
- Replies: 3
- Views: 2751
Re: Using Mother 32 with Moogerfooger
I think it's better to add the 1/4" adapter to an 1/8" cable to prevent strain on the jacks. I use something like this on the CP-251 & Moogerfoogers & all other 1/4" CV jacks http://www.fullcompass.com/prod/056790-Philmore-45-302G http://www.fullcompass.com/common/products/lg/...
- Thu Jan 28, 2016 9:30 am
- Forum: Moog Semi-Modular Analog Synthesizers
- Topic: tempo variation on power up
- Replies: 3
- Views: 1892
Re: tempo variation on power up
the mother32 tempo on power up will reset to the last tempo stored in the pattern bank
if the pattern is not saved before power up then it will be different when you turn it back on
i think what you are experiencing is normal behavior
if the pattern is not saved before power up then it will be different when you turn it back on
i think what you are experiencing is normal behavior
- Wed Jan 27, 2016 11:26 am
- Forum: Minimoog Forum
- Topic: Using glide and external Dual VCO with VX-351
- Replies: 3
- Views: 1622
Re: Using glide and external Dual VCO with VX-351
The output of the keyboard is KEYBOARD. It is the keyboard voltage and not the lag (or glide) processor. If the output of the keyboard also put out the glide, it would not be keyboard out, it would be something like “oscillator control out” or “Pitch out”. The keyboard out is outputting exactly that...