Moog Music Forum

In the last two weeks, I've seen a couple good sales on minifoogers. I'm guessing they're trying to unload the 1st gen pedals before the new ones are available. Keep checking musicians friend and others for deals. I managed to get the MF-Ring for $99 and the MF-Delay for $149 brand new from Musician...

Here is a picture of my Voyager XL and my MF-104m. http://1.bp.blogspot.com/-DaJyTR3kp2o/VLLsLSYsopI/AAAAAAAAAXU/-YOiZSH0UTU/s1600/20150111_222741%2B.jpg That doesn't look right. It looks like you have your delay hooked into the MULT. Maybe if your output went somewhere else, but this just like lik...

I found this too. I don't know anything else about it, but it does a 1:6 split.

https://www.tindie.com/products/hotchk1 ... -splitter/

It would be interesting running two 104Ms in stereo and using some kinda midi controller to make them act the same. That would sound nice.

That's no good. When you said it touched off the edge of a mixing desk, are you saying you dropped it, or just touched it to the edge of the mixer? If you dropped it, something inside could've gotten dislodged. Isn't there a ribbon cable attached to the switch? Maybe that has become unseated. If it ...

You might also try running the FreqBox's envelope out into the CP-251 mult in, running two of the mult outputs into the mixer, and using the mixer output. This should amplify the CV signal. Okay, I was wrong to doubt you. This does work, and it works very well. It didn't occur to me that you could ...

If you haven't already, check the battery. It's probably either dead or dislodged inside the case.

You might also try running the FreqBox's envelope out into the CP-251 mult in, running two of the mult outputs into the mixer, and using the mixer output. This should amplify the CV signal. Does that work? It doesn't seem like that should work. I did get something to work. I ran from the env out of...

I'll try that too. I did try some inversion, but I was also mixing the signal with the LFOs on the CP-251 at the time.

Try using the env CV from the Freq to modulate the TIME CV on the 104M. Good idea. I didn't really try to control anything else with it as a test. I don't know for sure but I think the env CV on the Freq behaves a bit differently than the env CV on the 101. It seems like it decays a bit faster to m...

I managed to get an MF drive pedal for Christmas from my girlfriend (good job on her part). I tried running the env out from my freqbox to the expression pedal in on the Mf Drive to get some goopy/funky bass sound, but the envelope from the freqbox doesn't seem to do much in this application. Has an...

On my MF-108, the delay time multiplier also multiplies the noise from the BBD chips. By the time it sounds like a delay, the BBDs are howling.

I don't know about this particular case, but delays are usually really really hungry for power and will eat up a 9v battery really quickly.

Check your battery.

I think that cable would work. Not 100% sure. Hopefully someone here knows more about the conversion than I do. You'll certainly be able to control pitch - it's the gate/trigger that needs the conversion and might be tricky.

Gladmarr mentioned he went down lower when playing the MG1 with his Voyager keyboad. So perhaps a simple cv/midi converter, using an external full range keyboard is all thats needed? I just ran a CV cable to control pitch, but you also need to be able to convert standard V-trigger to S-trigger for ...