Moog Music Forum

I assume it has 2 footswitches. Maybe a bypass and a tap tempo?

Praying for a flanged with LFO waveform selection...

Already making space on my live board...

At least this has been noted. I've had to cut a track from our set live due to this not working.

Best way to summarise it would be to say that while set to 'initial', it occasionally acts as though it's set to 'current'...

Shep

It does seem odd 2 of the same issue! I'm sure you have it all right, but I made one oversight when I 1st got mine so worth asking it again... You are using a TS (Mono) Jack - Jack yeah? Almost every expression pedal in the world uses TRS (Stereo) so I jumped straight to the TRS leads when I opened ...

If there is an option for midi through I'd love to know.

My midi clock generator only has one out, but I have 2 devices i want to sync. The MP-201 & a Boss SL-20. I'd love to run a cable from the midi out on the MP-201 to the Slicer and just have the midi clock continue so they are both sync'd.

I have the same issue. You want to turn the footswitch off and the effect revert to where it was before you turned it on.. However it seems to turn the LFO off at where ever it is within it's sweep and keep that value engaged... Annoying!

It seems to be due to signal chain...

If the pedals in the chain after it have a low noise floor then it becomes audible. If it is, cranking the drive and lowering the output seems to do the job.

Cheers to Stevie D for the guidance with this issue

I'm not sure. I don't use the OSC out for any part of my set up so have had no reason to try it. I'll be at the studio on Saturday and will try it out!

Hey folks, I'm experiencing a problem with my Freqbox. When engaged it emits a high pitch whistle on top of the sound. The pedal functions and sounds as it should, but the whistle is emitted on top of the sound. It's not as loud as the main effect but still audible. When the pedal is bypassed the sp...

Apologies if I'm missing the point... Can't you just use the MP201 with heel position set got and toe position set low (so an inverted expression pedal)?

The EP is done complete with lots of fooger' action -

www.ourhelicalmind.bandcamp.com

Another happy customer. Update done (I've been holding off a month or so to get a studio project out of the way incase any fine tuned presets changed at all!), not only is it all up and running now, but it has also resolved a few issues I had with V1.1 (Like the heel setting of LFO rates changing!)....

Pic taken after soundcheck from that same gig… shows the set up described above…

Great stuff. The work around is perfect and as for not seeing a full range in calibration mode makes sense. Still struggling with the heel though. If I edit a patch, allow the heel value robbed altered, move the pedal to where I want the heel to be, in this case the read out says it's at 750, click ...

Thanks bud! We hit the studio this weekend to start on our first EP so watch this space! As for the board... It's a little complex, but goes something like this... BASS -> Digitech Whammy IV -> Boss LS-2 Line Selector -> (Channel 1) - EHX BassMicroSynth (modded to control cutoff via expression) - - ...