Moog Music Forum

Is the normalised connection of the CP-251 squarewave working? I.e. do you get a "normal" S&H whose rate changes with the LFO freq? Yes, squarewave works fine. If that's okay, patch the CP-251 squarewave to the S&H input manually. If it works it could be either a cable problem or ...

bichuelo wrote:Have you tried sending the trigger signal to an attenuator before the Trig?

Yes, and checked sygnal by sending it to TAP/STEP input of MF-105M. And it works.

Hello,

Is there any chance to sync S&H of CP-251 by clock of EHX Clockworks or sync out of Korg SQ-1?
I tried IN and TRIG inputs of 251 in S&H area, but still no chance.

Got a great deal, bought mint MF-108M just for 300$
Now, I have a full collection of moogerfoogers.

Hi! I bought new white little phatty about two years ago,but the keys already turned yellow. It's soooooo awful!!! :( My voyager's keys stay white more than five years! Wrote to moog tech support and got this response: "Moving forward, this is a question we get often from customers with older k...

Vsyevolod wrote:Just bought a MF-104MSD from some guy named Alessandro something-or-other...

You are a moogerfooger maniac! How many of them do you have now?

Korg sq-1 and EHX Clockworks, which i won at auction for just 60 USD! So cheap toys and so much fun with foogers!

FC sends 0 to 10v. Hi! Page 13 of the manual: Additional CV control: The PITCH jack on the back panel is a CV input for external control of the oscillator pitch. This input controls the frequencies of both oscillators. A 1-volt change of this voltage will change the pitch by NOMINALLY one octave. T...

The Tempo/Sync jack can do step advance also. If you have a stereo 1/4" Y cable (that splits the stereo out to separate jacks), one signal in will tap the tempo and the other will advance the sequence one step for each gate pulse. The step advance is my favorite feature on the pedal as you can...

Korg volca beats with snare mod runs EHX Clockworks which sync MF-105M and korg SQ-1. A line of SQ-1 goes to Freq input of MF-107 which goes to MF-105M then to Space Echo and to Vermona VSR3 reverb. Slow LFO from CP-251 modulates Waveform of MF-107. B line of sQ-1 goes to Cutoff input of selfoscilla...

As for me MF-107 will be much better for this purpose.

page 13 of Manual:
"...and plugging the FS-1 or a gate signal in halfway to this input and the RATE LED turns green."

I hope this helps.

And that's what I got:

You can't see it from the bottom, only the side. There is a second circuit board attached to the motherboard, and there are jumper pins that extend from the top that touch the top of the chassis and short out. Even if it looks like they don't touch the top of the metal, they get close enough to cre...

hey dbit, i had similar problems with my 104z. i posted that some months ago. most other users had the problem that there´s a part of the little daughterboard glued to the mainboard touches the faceplate. to isolate that part (with a piece of paper for example) might be the solution then. in my cas...