Search found 117 matches

by paramnesia
Mon Feb 22, 2016 11:34 am
Forum: Subsequent 37 & Subsequent 25
Topic: Sub37 - Have you had this much trouble with other synths?
Replies: 15
Views: 10237

Re: Sub37 - Have you had this much trouble with other synths

Do you mean the main board? And hearing that the headphone output fault is a PCB and knowing the only PCB other than the control panel is the mainboard looks like I'm going to have to get that sent back too? headphone out is fed from the main board thru the 2 ribbon cables in the panels boards, so ...
by paramnesia
Mon Feb 22, 2016 11:22 am
Forum: Moog Semi-Modular Analog Synthesizers
Topic: new Mother 32- loose midi plug
Replies: 2
Views: 1893

Re: new Mother 32- loose midi plug

I would open it up & flip the panel over to verify the screws are still in the stand-offs. Do you have loose sounds rattling inside? Should be user serviceable...
by paramnesia
Thu Feb 18, 2016 10:14 am
Forum: Little Phatty & Slim Phatty Forum
Topic: Defective Little Phatty II
Replies: 4
Views: 3237

Re: Defective Little Phatty II

Guys any help with that issue? Thanks have you considered contacting Moog service directly and asking them? Andy Hughes, Service Manager andy@moogmusic.com 828-251-0090 xt 221 Nate Marino natemarino@moogmusic.com xt. 204 Taylor Mott taylor@moogmusic.com xt. 217 have you registered your product in t...
by paramnesia
Wed Feb 17, 2016 5:04 pm
Forum: Taurus, Minitaur & Sirin
Topic: any news on the new minatuar firmware & editor
Replies: 15
Views: 9153

Re: any news on the new minatuar firmware & editor

see recent comments from Amos regarding Sub37 editor & developer resources for Subphatty updates (likely applies to Minitaur as well): http://forum.moogmusic.com/viewtopic.php?f=7&t=24627#p151915 we're only waiting to begin beta-testing it until Sub 37 Editor is released... which is behind s...
by paramnesia
Tue Feb 16, 2016 3:34 pm
Forum: Little Phatty & Slim Phatty Forum
Topic: Midi in jack too recessed. Self fixable?
Replies: 2
Views: 2295

Re: Midi in jack too recessed. Self fixable?

The top midi out jack is an integrated part of the left side shield & cannot be adjusted. The bottom midi in jack is an integrated part of the main sound PCB & cannot be adjusted. Suggested Instructions below: 1 - Register your Moog unit at http://www.moogmusic.com/content/register-product 2...
by paramnesia
Tue Feb 16, 2016 3:01 pm
Forum: Minimoog Forum
Topic: New Voyager - knobs turn off center/axis. Normal?
Replies: 3
Views: 1979

Re: New Voyager - knobs turn off center/axis. Normal?

normal - the alpha pots can have some variation in the center of the shaft
by paramnesia
Fri Feb 12, 2016 11:43 am
Forum: Moog Music General Topics Forum
Topic: RUMORS - not of the Fleetwood Mac nature
Replies: 20
Views: 17800

Re: RUMORS - not of the Fleetwood Mac nature

PSE/EB/RME/OS/Aluminum Voyager discontinued. End of Life announcement correlated to the last 600 units for sale

XL production still going for an undetermined period of time...
by paramnesia
Wed Feb 10, 2016 9:26 am
Forum: Moogerfooger Forum
Topic: 104M available!
Replies: 8
Views: 5773

Re: 104M available!

104M has been discontinued. False, production is suspended until more chips are found. I bought 2 new ones in September 2015. They've run out of the chips needed for the delay. True, production is suspended until more chips are found. source http://www.moogmusic.com/news/mf-104m-analog-delay-produc...
by paramnesia
Fri Feb 05, 2016 2:52 pm
Forum: Minimoog Forum
Topic: Faulty TI chips in Voyager Old School?
Replies: 18
Views: 15715

Re: Faulty TI chips in Voyager Old School?

see this thread http://forum.moogmusic.com/viewtopic.php?f=2&t=21943&start=45 and also muffwiggler comments https://www.muffwiggler.com/forum/viewtopic.php?t=132904&start=all&postdays=0&postorder=asc&sid=00392c2bd8313c635ea62ab924fce4fc Dear Registered Owner of the Minimoog V...
by paramnesia
Tue Feb 02, 2016 7:24 pm
Forum: Modular Forum
Topic: Technical Limitations of Moog Modular Synthesiser
Replies: 10
Views: 6648

Re: Technical Limitations of Moog Modular Synthesiser

check original manuals over at http://www.synthfool.com/docs/Moog/modular/ you might search for the original 1981 ‘The Moog Modular Synthesizer Owner’s Manual’, 190pgs. I only have a PDF. It is an unabridged copy of the 1981 manual by Dan Wyman. It still carries the 1981 Copyright to Moog Music, Inc...
by paramnesia
Tue Feb 02, 2016 11:27 am
Forum: Taurus, Minitaur & Sirin
Topic: Minitaur and Mother 32 PSU - are they the same?
Replies: 2
Views: 2257

Re: Minitaur and Mother 32 PSU - are they the same?

yes, both are 12V center pin positive
by paramnesia
Mon Feb 01, 2016 10:34 am
Forum: Subsequent 37 & Subsequent 25
Topic: How much to replace SUB 37 Filter pot?
Replies: 7
Views: 2860

Re: How much to replace SUB 37 Filter pot?

hi paramnesia in your case re:swapout the front panel board with the filter knob, did they just send you the board to do yourself? im fairly handy with a soldering iron i could do this myself also. Would like to know how i go about getting the board sent out. Happy to pay for the postage to send to...
by paramnesia
Thu Jan 28, 2016 6:18 pm
Forum: Moog Semi-Modular Analog Synthesizers
Topic: Using Mother 32 with Moogerfooger
Replies: 3
Views: 2746

Re: Using Mother 32 with Moogerfooger

I think it's better to add the 1/4" adapter to an 1/8" cable to prevent strain on the jacks. I use something like this on the CP-251 & Moogerfoogers & all other 1/4" CV jacks http://www.fullcompass.com/prod/056790-Philmore-45-302G http://www.fullcompass.com/common/products/lg/...
by paramnesia
Thu Jan 28, 2016 9:30 am
Forum: Moog Semi-Modular Analog Synthesizers
Topic: tempo variation on power up
Replies: 3
Views: 1888

Re: tempo variation on power up

the mother32 tempo on power up will reset to the last tempo stored in the pattern bank

if the pattern is not saved before power up then it will be different when you turn it back on

i think what you are experiencing is normal behavior
by paramnesia
Wed Jan 27, 2016 11:26 am
Forum: Minimoog Forum
Topic: Using glide and external Dual VCO with VX-351
Replies: 3
Views: 1616

Re: Using glide and external Dual VCO with VX-351

The output of the keyboard is KEYBOARD. It is the keyboard voltage and not the lag (or glide) processor. If the output of the keyboard also put out the glide, it would not be keyboard out, it would be something like “oscillator control out” or “Pitch out”. The keyboard out is outputting exactly that...