Moog Music Forum

I would not say it's a bug - it is a function: in category mode you can jump to the next preset with the same category when you hit ENTER two times. You can step backwards when you press and hold ENTER and hit the CURSOR. You can see right arrows for forewards jumps and the left arrows for backwards...

MASTER --> Copyright Info --> ENTER --> +1 (up) --> Power-ON Screen --> ENTER --> CURSOR (YES)--> ENTER

Hi David,
get the original XL files here: https://back.moogmusic.com/sites/defaul ... 0/v3.6.zip
Send bank D when the Voyager asks for after power on.
If it's not possible then there are problems with your interface or PC drivers.
Rudi

Hi,
then you are in the boot system.
Make the update as is descripted in the middle of this thread:

http://forum.moogmusic.com/viewtopic.php?f=2&t=22525

Yes, I replaced this display on few Voyagers.

Hi AvMjr,
a good tech should have no problem to replace this LCD.
Where are you located?

Rudi

you still have to make the settings. The best would be a reset. In the MASTER menu you will find the "Copyright Info" function. If you press ENTER you can see the info. On this page you have to press the "+1" button, then you are in a hidden menu. Select "Factory Reset"...

DigiKey part number NHD-12864WG-BTFH-V#N-ND

the contrast of this black and white display is much better.

you don't need to change the rechargeable battery. it is sufficient if the RME remains switched on for 5-10 hours. The battery is charged during this time.

Hi naturecol,
if the noise is too loud the signal can disturb the CMOS switches for the modulation. You should reduce the volume of the noise with the trim pot inside. Maybe this is the reason.
I can send you photos of the trim pot position. Please send me a PM.

Rudi

Hi Marc,
how loud is the noise generator output? Is it louder than one oscillator (same amount positions of course)?
Rudi

Hi folks,

when MIDI thru is not working too it's a broken PC900 or the 74HCT14 chip.

Take a look here in the middle of the page:

http://forum.moogmusic.com/viewtopic.php?f=2&t=22525

you can do this with the 3.6 version.
Here is the description for the download:
http://forum.moogmusic.com/viewtopic.php?f=2&t=22525

In the MASTER menu page 4.4 you can either use the "Recall last Edit" function or
set the "Real Panel Values" for the CURSOR.

Hi daniel12,
replace C8 (a Mica cap would be better) that's all.