Moog Music Forum

Hi All! I believe the problem Szynkazmaslem is encountering here could be due to the MIDI settings in Ableton. In the screenshot of the MIDI preferences in Ableton, I see that SYNC for "Output: Minitaur" is turned OFF. Try turning this ON to see if this resolves the sync issue. All of your...

Hi Sub Guy,

Did you save the preset you were working on? Velocity sensitivity in particular is stored per preset, so if the preset was not saved, neither were you changes. Hope this helps!

For those having connectivity issues with their Minitaur, the newest versions of the firmware and editor are available after registering your instrument. If you have already registered and did not receive the download, please contact Moog Tech Support directly: Adam Pryor [email protected].com (828) 25...

The highest note the Minitaur can play is C5, are you trying to slide above that? I would also recommend running a note calibration from the editor.

Greetings All, You will be pleased to know that we now have new versions of both the Minitaur firmware (v2.2.0) and editor software (v3.2.0) ready for release. The new updates should help to address these issues. Please contact us directly and we will be more than happy to pass along the download li...

Greetings, Please contact us directly for assistance with this issue, we will be more than happy to help. Adam Pryor [email protected].com (828) 251-0090 Ext. 246 Harrison Street [email protected].com Ext. 221 Noah Jolly [email protected].com Ext. 204 Thank you, Taylor Mott Service Manager [email protected]...

Hi there, Please contact us directly for assistance with this issue, we will be more than happy to help. Taylor Mott, Service Manager [email protected].com 828-251-0090 Ext 217 Adam Pryor [email protected].com Ext. 246 Harrison Street [email protected].com Ext. 221 Noah Jolly [email protected].com Ext. 20...

This is to allow for some wiggle room on the high end. Properly calibrated, it should sit right around 123 in tune with oscillator 1.
The Sub line has an automatic note calibration process, so there is no need for any extra range as you could always run the note calibration if it's out of tune.

SQ-1 is rock-solid and affordable. Arturia's controllers can be a bit buggy in my experience.

Hi Scott,

In the MIDI menu of your Sub 37, check the settings in the Out Filters. You can filter out the MIDI signal for knob turns, pitch and mod wheel, or keyboard if you so choose.

Hello, this was a bug in the firmware that was corrected with v1.8. The new firmware is available on the downloads tab of the Model D page:
https://www.moogmusic.com/sites/default ... v1_8_0.zip

Sounds like the Minitaur is in boot loader mode. Try resending the firmware from C6. It is a very simple sysex handler and there's no need to mess with buffer size or speed.

https://www.elektron.se/wp-content/uplo ... N_1.51.zip

Sub 37 pot calibration files can be found here:
https://www.dropbox.com/s/ai4ko7cg0tns9 ... L.zip?dl=0

I would check to make sure that your MIDI output and input are set to different channels to mitigate any MIDI feedback. Turning local control on and off could get annoying

Hello Pastoral,

This can only be done via CV as the CV inputs on the Sub 37 are arbitrary and can be changed to clock the internal arp rate, turn the arp on, etc. This can be done in the Global menu under CV Mapping.