Search found 36 matches

by [email protected]
Thu Dec 22, 2016 2:41 pm
Forum: Subsequent 37 & Subsequent 25
Topic: Sub 37 Filter very jumpy..
Replies: 2
Views: 650

Re: Sub 37 Filter very jumpy..

Had the same problem. Read my report here:
viewtopic.php?f=21&t=26131#p159068
by [email protected]
Thu Dec 15, 2016 5:55 am
Forum: Subsequent 37 & Subsequent 25
Topic: Sub 37 cut off pot issue
Replies: 17
Views: 4444

Re: Sub 37 cut off pot issue

It was good of Moog to acknowledge and fix the problem with the Sub 37 filter pot by substituting a back-mounted metal pot, but I does make me wonder how long the other surface-mount pots on my Sub 37 are going to last. Considering that the filter pot is probably touched and moved 1'000 times more ...
by [email protected]
Thu Dec 15, 2016 5:51 am
Forum: Little Phatty & Slim Phatty Forum
Topic: Sub37: Noise from keypress with filter at 0?
Replies: 5
Views: 2302

Re: Sub37: Noise from keypress with filter at 0?

No filter does completely shut off the signal. At the lowest setting, the Filter cutoff is at 20Hz with the higher frequencies attenuated by 6/12/18/24dB per octave depending on the filter setting. So there's still audio coming through, but at a rather low level. Or maybe you hear a filter click bec...
by [email protected]
Wed Dec 07, 2016 4:57 am
Forum: Subsequent 37 & Subsequent 25
Topic: Throw me a rope
Replies: 16
Views: 4183

Re: Throw me a rope

H_M_D wrote:Remember to take breaks. I'm English so I would go and boil the kettle and have a cuppa with my little finger righteously pointing skyward.


Best. Advice. Ever.
And something I always forget to do: Take breaks.
by [email protected]
Wed Dec 07, 2016 4:36 am
Forum: Subsequent 37 & Subsequent 25
Topic: Sub 37 cut off pot issue
Replies: 17
Views: 4444

Re: Sub 37 cut off pot issue

I don't think so. The main difference on the right panel board of the Sub37 is that the old filter cutoff pot is surface mounted vs the new pot is back mounted.Thus the whole construction is more solid. Simply replacing the plastic shaft pot with a metal shaft pot did obviously not solve the problem...
by [email protected]
Tue Dec 06, 2016 4:40 am
Forum: Subsequent 37 & Subsequent 25
Topic: Sub 37 cut off pot issue
Replies: 17
Views: 4444

Re: Sub 37 cut off pot issue

AFAIK the exact same pots were used on the Voyager and the Sub Phatty. On the 37 there probably was just a very unfortunate combination of physics (larger pot, panel flex) going on. According to the tech, they generally don't fail.
by [email protected]
Mon Dec 05, 2016 11:24 am
Forum: Subsequent 37 & Subsequent 25
Topic: Sub 37 cut off pot issue
Replies: 17
Views: 4444

Re: Sub 37 cut off pot issue

OK.. I just posted something similar to this. My filter knob is behaving similarly.. but do you also have the multidrive knob adjusting filter cutoff when it's glitching like this? (takes a bit of fiddling to make this happen, but if's def happening here) I have not tried that. Anyway, I suggest to...
by [email protected]
Mon Dec 05, 2016 11:22 am
Forum: Subsequent 37 & Subsequent 25
Topic: Sub 37 cut off pot issue
Replies: 17
Views: 4444

Re: Sub 37 cut off pot issue

Just for the record, now my Sub37 #2232 has developed the same problem. Around 300Hz. I contacted the local distributor and was adviced to bring the Synth for a service. I'll report back how it went in a week or two. Totally forgot to report back, because it went so smoothly! Right after contacting...
by [email protected]
Sun Nov 20, 2016 1:57 pm
Forum: Subsequent 37 & Subsequent 25
Topic: Throw me a rope
Replies: 16
Views: 4183

Re: Throw me a rope

Hi James, First off congratulations to your Sub37! It's a great synth, and IMO one of the best to start with and get into sound design and learning synth stuff. Because on one hand it's rather basic and old school, and you can work with just the hardware knobs you have there. On the other hand it's ...
by [email protected]
Sun Nov 20, 2016 1:35 pm
Forum: Subsequent 37 & Subsequent 25
Topic: Logic X Track Icons
Replies: 1
Views: 728

Re: Logic X Track Icons

Thank you very much!
by [email protected]
Tue Oct 18, 2016 9:07 am
Forum: Subsequent 37 & Subsequent 25
Topic: Sub 37 cut off pot issue
Replies: 17
Views: 4444

Re: Sub 37 cut off pot issue

ocelot wrote:The filter seems to jump and skip, mainly around the 1.2khz mark.



Just for the record, now my Sub37 #2232 has developed the same problem. Around 300Hz. I contacted the local distributor and was adviced to bring the Synth for a service. I'll report back how it went in a week or two.
by [email protected]
Thu Sep 01, 2016 8:11 am
Forum: Subsequent 37 & Subsequent 25
Topic: 1/3 and 2/3 filter keyboard tracking
Replies: 10
Views: 687

Re: 1/3 and 2/3 filter keyboard tracking

Problem is either I'm not an english native speaker (totally possible cause) [...] Me neither... ..Ok we seem to agree indeed Great! BTW, thanks again for pointing out that it's possible to use keys/octaves to get ratios for the tracking. Altough the concept is obvious, it didn't occur to me when I...
by [email protected]
Wed Aug 31, 2016 11:32 am
Forum: Subsequent 37 & Subsequent 25
Topic: 1/3 and 2/3 filter keyboard tracking
Replies: 10
Views: 687

Re: 1/3 and 2/3 filter keyboard tracking

So it's more like: you'll have to play the fourth C to get a frequency 2 octaves higher than the first key [...] Which is exactly what I said: So you would have to play the fourth C to get the double octave from the first key. IOW: With 2/3 KB tracking you have to play the fourth C (triple (!) octa...
by [email protected]
Tue Aug 30, 2016 12:34 pm
Forum: Subsequent 37 & Subsequent 25
Topic: 1/3 and 2/3 filter keyboard tracking
Replies: 10
Views: 687

Re: 1/3 and 2/3 filter keyboard tracking

At KB tracking = 2/3, you will need to play the second next C key to have the resonance peak increased by one octave. To find that setting, play alternatively the first and the third C keys adjusting the KB tracking untill the two resulting resonance peaks are separated by one octave. Great idea do...
by [email protected]
Mon Apr 25, 2016 3:57 pm
Forum: Subsequent 37 & Subsequent 25
Topic: Sub 37 precise tempo on screen
Replies: 20
Views: 3477

Re: Sub 37 precise tempo on screen

DUBMCT wrote:For me its to be able to live jam with others, and not have to have things midi'd up. This can provide more organic options to tempo.


+1