Search found 99 matches

by SteveD
Tue Aug 10, 2010 9:32 am
Forum: Controllers Forum
Topic: Trouble with CV!
Replies: 8
Views: 3481

Re: Trouble with CV!

Hi Simon - The CV input on the MF-101 is less than full range with a 0 to +5V input. So this is normal. When we introduced the moogerfooger MF-101, we figured a large number of users would be guitar players, and they would want to use expression pedals for filter sweeps, sort of like a wah. The rang...
by SteveD
Fri Jul 09, 2010 1:53 pm
Forum: Taurus, Minitaur & Sirin
Topic: How to store volume types ?
Replies: 3
Views: 1131

Re: How to store volume types ?

Hi All -

You can adjust and save the Volume Sustain Parameter. This would work as it sets a maximum level for the Output VCA.

Hope this helps...

SD
by SteveD
Fri Jun 11, 2010 9:50 am
Forum: Controllers Forum
Topic: MP 201 LFO sync to Tap Tempo of MF 105B issues
Replies: 4
Views: 1939

Re: MP 201 LFO sync to Tap Tempo of MF 105B issues

Hi -
Square waves are generally used for most timing applications, because they have sharp rising and falling edges. I'd try that first...

Good Luck!

SD
by SteveD
Wed Jun 09, 2010 9:22 am
Forum: Controllers Forum
Topic: MP 201 LFO sync to Tap Tempo of MF 105B issues
Replies: 4
Views: 1939

Re: MP 201 LFO sync to Tap Tempo of MF 105B issues

Hi Han - How's Chewbacca? Say - it was a feature of the original murfs that the Tap/Step function had two purposes. The tip connection of this jack is the tap tempo input, while the ring connection of this jack is the Step input. Gate signals received on the Ring stop the internal clock and each gat...
by SteveD
Fri May 28, 2010 10:16 am
Forum: Moogerfooger Forum
Topic: FreqBox calibration/tuning
Replies: 12
Views: 10159

Re: FreqBox calibration/tuning

Hi All - Needless to say, I don't recommend popping open your freqbox to mess with the calibration unless you know what you're doing. However, if you are attempting this, set the panel frequency control to 12:00 when tuning the V/Octave scale trimpot. Also make sure env. amount is at zero. The panel...
by SteveD
Fri May 28, 2010 9:54 am
Forum: Minimoog Forum
Topic: Getting Little Phatty filter overdrive sound with Voyager
Replies: 14
Views: 11939

Re: Getting Little Phatty filter overdrive sound with Voyage

Hi All - There are two components to the special sauce known as the LP "overload" (note - named after the overload light on the original minimoog mixer). The first is positive feedback in the mixer before the filter. This is related to but a little different than the old output to audio input trick ...
by SteveD
Tue May 25, 2010 6:03 pm
Forum: Minimoog Forum
Topic: E Drone w/ Microtones
Replies: 4
Views: 936

Re: E Drone w/ Microtones

Hi Elflord - Yes - I enjoyed figuring out how to make that patch. The key is in using the pot mapping function to map the keyboard pitch negatively @ 25% or 50% to the Osc.2 Octave. (I forget the exact amount and don't have a voyager w/ that patch on it handy right this moment) Thus when you play up...
by SteveD
Mon Apr 12, 2010 10:00 am
Forum: Controllers Forum
Topic: Minimoog OS and MCV4 CV/GATE Midi ! solved problem
Replies: 7
Views: 3940

Re: Minimoog OS and MCV4 CV/GATE Midi ! solved problem

Hi - There are a couple shortcomings in that review - look what feature the Kenton 2000 pro solo has to deal with tuning: (From the Kenton manual) "CV x Scale ( -127 to +127 default 0) - This is used to tune in the octave scaling of your analogue synth. Will only need adjusting if your synth sounds ...
by SteveD
Mon Apr 12, 2010 9:38 am
Forum: Minimoog Forum
Topic: Afterpressure question???
Replies: 3
Views: 826

Re: Afterpressure question???

Hi - To control the Pedal/On Modulation Bus, the best way to do this is per preset - use the POT MAPPING function to assign Afterpressure to control MOD1 (MOD1 is the controller signal for the Pedal/On Mod Buss). If you have the editor - I think this is can be done quickly to a large number of prese...
by SteveD
Mon Apr 12, 2010 9:25 am
Forum: Minimoog Forum
Topic: Voyager RME Pitch Bend Issue
Replies: 6
Views: 1646

Re: Voyager RME Pitch Bend Issue

Hey - Glad you got it fixed! It sounds to me as though you had a RME that had the Keyboard version firmware loaded by mistake! The keyboard version scans the pitchbend input, and if the pitchbend signal is not there, as in the RME, it outputs the lowest value. So if anybody else sees this kind of be...
by SteveD
Fri Apr 09, 2010 12:05 pm
Forum: Minimoog Forum
Topic: Pitch Envelope on a Voyager
Replies: 5
Views: 1458

Re: Pitch Envelope on a Voyager

Hey Ve Man- There are a couple other ways to get this sound. I was asked how to create this sound when the Voyager was first released, and back then, you had to ride the Glide On/Off switch - kind of difficult to do w/ the Hoedown riff. Now, you have two choices - both require using some of the adva...
by SteveD
Wed Mar 31, 2010 10:50 am
Forum: Theremin Forum
Topic: midify theremin Etherwave Plus or Ash in midi
Replies: 10
Views: 8945

Re: midify theremin Etherwave Plus or Ash in midi

Hi -

If you use Max/MSP - you can use MSP to generate MIDI directly from the Audio signal. There are both amplitude and frequency measurement tools available in MSP... I wouldn't be surprised if someone in their user community hadn't already made a patch that does this.

SD
by SteveD
Tue Feb 09, 2010 3:55 pm
Forum: Minimoog Forum
Topic: voyager quick knob changes sounds i when it shouldn;t
Replies: 6
Views: 1254

Hi papamoan -

In the Panel/Quickmode screen, after changing the value from NO to YES, press the ENTER button to save this change.

Sorry for the confusion...

SD
by SteveD
Fri Oct 16, 2009 10:28 am
Forum: Moogerfooger Forum
Topic: colour blind
Replies: 7
Views: 2047

Hi -

I sent you a PM. Check it out and get back to me - we'll help you out!

SD
by SteveD
Tue Jul 28, 2009 1:49 pm
Forum: Moogerfooger Forum
Topic: Synchronisation of MURF and RingMod
Replies: 17
Views: 10400

Hi Michael - Try patching the square wave through the Lag processor. The issue is probably due to the square wave "overshooting" a little somewhere in the signal path with the fast rise and fall times. You can use the Lag processor to slow down the rise and fall times just a hair to get rid of the c...