Search found 141 matches

by Gladmarr
Sun Feb 01, 2015 5:39 pm
Forum: Minifooger Forum
Topic: Minifooger sales - heads up!
Replies: 0
Views: 1026

Minifooger sales - heads up!

In the last two weeks, I've seen a couple good sales on minifoogers. I'm guessing they're trying to unload the 1st gen pedals before the new ones are available. Keep checking musicians friend and others for deals. I managed to get the MF-Ring for $99 and the MF-Delay for $149 brand new from Musician...
by Gladmarr
Mon Jan 12, 2015 5:54 pm
Forum: Moogerfooger Forum
Topic: MF-104m Delay Problem
Replies: 6
Views: 1713

Re: MF-104m Delay Problem

Here is a picture of my Voyager XL and my MF-104m. http://1.bp.blogspot.com/-DaJyTR3kp2o/VLLsLSYsopI/AAAAAAAAAXU/-YOiZSH0UTU/s1600/20150111_222741%2B.jpg That doesn't look right. It looks like you have your delay hooked into the MULT. Maybe if your output went somewhere else, but this just like lik...
by Gladmarr
Mon Jan 12, 2015 5:47 pm
Forum: Moogerfooger Forum
Topic: Midi chain for multiple moogerfoogers
Replies: 4
Views: 1684

Re: Midi chain for multiple moogerfoogers

I found this too. I don't know anything else about it, but it does a 1:6 split.

https://www.tindie.com/products/hotchk1 ... -splitter/
by Gladmarr
Mon Jan 05, 2015 4:57 pm
Forum: Moogerfooger Forum
Topic: Running Two MF-104m's Together
Replies: 7
Views: 1532

Re: Running Two MF-104m's Together

It would be interesting running two 104Ms in stereo and using some kinda midi controller to make them act the same. That would sound nice.
by Gladmarr
Mon Dec 29, 2014 12:11 pm
Forum: Minifooger Forum
Topic: Minifooger delay, light off wont turn on
Replies: 6
Views: 1756

Re: Minifooger delay, light off wont turn on

That's no good. When you said it touched off the edge of a mixing desk, are you saying you dropped it, or just touched it to the edge of the mixer? If you dropped it, something inside could've gotten dislodged. Isn't there a ribbon cable attached to the switch? Maybe that has become unseated. If it ...
by Gladmarr
Sun Dec 28, 2014 7:59 pm
Forum: Moogerfooger Forum
Topic: Freqbox envelope out
Replies: 8
Views: 1686

Re: Freqbox envelope out

You might also try running the FreqBox's envelope out into the CP-251 mult in, running two of the mult outputs into the mixer, and using the mixer output. This should amplify the CV signal. Okay, I was wrong to doubt you. This does work, and it works very well. It didn't occur to me that you could ...
by Gladmarr
Sun Dec 28, 2014 5:55 pm
Forum: Minifooger Forum
Topic: Minifooger delay, light off wont turn on
Replies: 6
Views: 1756

Re: Minifooger delay, light off wont turn on

If you haven't already, check the battery. It's probably either dead or dislodged inside the case.
by Gladmarr
Sat Dec 27, 2014 5:28 pm
Forum: Moogerfooger Forum
Topic: Freqbox envelope out
Replies: 8
Views: 1686

Re: Freqbox envelope out

You might also try running the FreqBox's envelope out into the CP-251 mult in, running two of the mult outputs into the mixer, and using the mixer output. This should amplify the CV signal. Does that work? It doesn't seem like that should work. I did get something to work. I ran from the env out of...
by Gladmarr
Sat Dec 27, 2014 1:54 pm
Forum: Moogerfooger Forum
Topic: Freqbox envelope out
Replies: 8
Views: 1686

Re: Freqbox envelope out

I'll try that too. I did try some inversion, but I was also mixing the signal with the LFOs on the CP-251 at the time.
by Gladmarr
Sat Dec 27, 2014 2:18 am
Forum: Moogerfooger Forum
Topic: Freqbox envelope out
Replies: 8
Views: 1686

Re: Freqbox envelope out

Try using the env CV from the Freq to modulate the TIME CV on the 104M. Good idea. I didn't really try to control anything else with it as a test. I don't know for sure but I think the env CV on the Freq behaves a bit differently than the env CV on the 101. It seems like it decays a bit faster to m...
by Gladmarr
Fri Dec 26, 2014 7:21 pm
Forum: Moogerfooger Forum
Topic: Freqbox envelope out
Replies: 8
Views: 1686

Freqbox envelope out

I managed to get an MF drive pedal for Christmas from my girlfriend (good job on her part). I tried running the env out from my freqbox to the expression pedal in on the Mf Drive to get some goopy/funky bass sound, but the envelope from the freqbox doesn't seem to do much in this application. Has an...
by Gladmarr
Thu Dec 25, 2014 12:27 pm
Forum: Moogerfooger Forum
Topic: extending MF-108M delay time mod
Replies: 4
Views: 1459

Re: extending MF-108M delay time mod

On my MF-108, the delay time multiplier also multiplies the noise from the BBD chips. By the time it sounds like a delay, the BBDs are howling.
by Gladmarr
Sun Dec 14, 2014 10:40 am
Forum: Minifooger Forum
Topic: MF Delay: problem with feedback
Replies: 6
Views: 2710

Re: MF Delay: problem with feedback

I don't know about this particular case, but delays are usually really really hungry for power and will eat up a 9v battery really quickly.

Check your battery.
by Gladmarr
Sun Dec 14, 2014 10:25 am
Forum: Moog Music General Topics Forum
Topic: MG1 lower octave mod?
Replies: 14
Views: 2361

Re: MG1 lower octave mod?

I think that cable would work. Not 100% sure. Hopefully someone here knows more about the conversion than I do. You'll certainly be able to control pitch - it's the gate/trigger that needs the conversion and might be tricky.
by Gladmarr
Fri Dec 12, 2014 9:17 pm
Forum: Moog Music General Topics Forum
Topic: MG1 lower octave mod?
Replies: 14
Views: 2361

Re: MG1 lower octave mod?

Gladmarr mentioned he went down lower when playing the MG1 with his Voyager keyboad. So perhaps a simple cv/midi converter, using an external full range keyboard is all thats needed? I just ran a CV cable to control pitch, but you also need to be able to convert standard V-trigger to S-trigger for ...