Moog Music Forum

WilliamHeadings wrote: ↑Fri Nov 29, 2019 2:04 am Are Sub 37 & Subsequent 37 presets compatable? Can i put Sub 37 presets on my Subsequent 37?

Hi William,

I do it all the time. You can tweak MIXER, FEEDBACK (FDBK), and MULTIDRIVE settings if you don't like the slight changes in gain staging. But you may just like them just as they are.

I'm running a sequence from my eurorack system into the PITCH CV of the SUB 37 and I'd like to save the pitch sequence to the Sub 37. I thought that after each gate sent to the KB GATE it would input a step while in REC mode but it doesn't seem to do anything. Is this method of programming the sequ...

The effect I’m trying to do live is slowly but continuously pitching up OSC 2 until it settles at one octave above OSC 1. Is there any way to expand the pitch range? Is there any way to use mod or any menu options to help? Thanks!! Hi real_eggs, Assign CONST ON [Constant On] as one of your MODs' PG...

Though after listening more carefully, there’s quite some noticeable clicking noise when the LFO ducks the volume. Not at all pleasant... What could cause the click noise on the Minitaur? Hi MBlom. Any time you rapidly and dramatically change the volume of a sound (especially with sounds using simp...

Thank you MC!

It's so hard to remember everything about every model.

This will at least keep me from sounding too stupid

Hi Gang,

I got to have just a little time with a Moog Model 10:

https://www.youtube.com/watch?v=VKfrGQyv5_g

I'm sure the folks lucky enough to own and live with Moog modulars will find some factual errors and patching inefficiencies, but I hope that I did it some justice anyway

Deva wrote: ↑Tue Sep 10, 2019 12:13 amIf I plug in a sustain pedal and hold the pedal down and play a series of notes, only some of the notes trigger.

I think that may have to do with which Voice Mode you're using, and what Note Priority type is chosen.

If I plug cables into the second Attenuator, then the first Attenuator controls filter cutoff (no cables in the first Attenuator at all). Weird issue... check a number of times and turned the synth off and back on and the issue is unchanged. I don't have one in front of me, but I recall that there'...

One thought I have though is that there are some advantages of not having a volume control on my current model in that I don't need both hands to play it - I can get on my knees on stage and play the Theremin and control pedals at the same time. Any advice anyone? Hi Edna, Since all of the Moog The...

bichuelo wrote: ↑Thu Aug 29, 2019 6:01 am Semiquaver, maybe? It is the same as a 1/16th note

Clever!

Like RobustAmerican, I'm also wondering if there's a MIDI loop going on somewhere.

That would certainly explain it.

So... Can you make this happen if there are no USB or 5-pin DIN MIDI connections?

TRS 1/4" cables are particularly useful with Moogerfoogers and the CP-251 as they won't short out the +5v DC that goes to Expression pedals. It won't hurt them to use TS cables but, since the +5v DC has been (safely) shorted to ground, you can't use TRS Expression pedals in any of the other jacks un...

And here's A Gritty Romance for MRNUTTY.

It will work on any Sub 37, Subsequent 37, and Subsequent 37 CV.

Basically I would like the following: Great Bass sounds (Moog duh) Sequencer / Arpedgiator / LFO that beat syncs with Ableton Multiple Presets Suggestions? Hi thepilgrimsdream, At least to me, it's clear that you want a Sub 37, Subsequent 37, or a Subsequent 37 CV. Any of these synths will check al...

Here's MaximumLEDs.

It will work on any Sub 37, Subsequent 37, and Subsequent 37 CV.