Search found 812 matches

by Bryan T
Sat Dec 19, 2009 10:05 pm
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

The Ring Mod's internal carrier is designed to be at the same intensity as the audio signal. I'm not so sure about this; I think the carrier is just line-level all the time. I know the ring mod sounds weak when using an external instrument-level carrier with the mix at ten, which is mildly disappoi...
by Bryan T
Sat Dec 19, 2009 1:37 pm
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

BUT, when you lower the LFO offset about 40% (interesting percentage..) it has a similar effect as using the *internal carrier with mix at 6*, adding in an extra hump or whatever, giving it a more rhythmic fee similar to the Internal carrier behavior noted- there is more inherent noise and use of a...
by Bryan T
Sat Dec 19, 2009 12:36 pm
Forum: Moogerfooger Forum
Topic: The Last Frontier - MuRF
Replies: 21
Views: 3921

I've never owned the MuRF, but I think it could be wonderful for non-dance music. For ambient music, I think it would work wonderfully for pad-like sounds. You could have things evolve very slowly. With the introduction of MIDI, I think you should be able to use the MuRF for quite jarring effects be...
by Bryan T
Sat Dec 19, 2009 12:07 pm
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

DontBelievetheHype wrote:Anyway, this thread is long and confusing, but I think I got the jist of it; If there's anything I missed let me know :)
Thanks! That was a great response.
by Bryan T
Fri Dec 18, 2009 8:33 pm
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

Perhaps clarity for you but I will have to think about this some more. Not to complicate matters, but also realize the difference formula for ring modulation is simple with sine waves which but when the carrier becomes complex, things get more interesting. Saw waves especially are harmonically rich...
by Bryan T
Fri Dec 18, 2009 6:37 pm
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

I think that the differing shape of the tremolo may be caused by wave interference of the input, and output waveforms, which results in beating, which, if slow enough will sound like tremolo. I don't exactly understand how the ringmod works, as i am not an electrical engineer, but I don know that t...
by Bryan T
Fri Dec 18, 2009 1:48 pm
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

Brian, The 102's frequency POT is set on the first line about 1k (about 12 or 1:00). I had it set there for a patch that I haven't yet documented, so I didn't tweak it at all. With the Ringmod Frequency Switch on the LO position, it was half tone/half tremelo. Switching the switch DOES effect it. I...
by Bryan T
Fri Dec 18, 2009 1:14 am
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

Thanks for checking it out. I introduced a squarewave courtesy of the VX351 into the carrier in. Now, what I noticed from the mix knob is that the volume of my overall tone decreased until I reached 5, where the carrier signal, modulated by the square wave woudl be heard. With the Ringmod frequency ...
by Bryan T
Thu Dec 17, 2009 9:47 pm
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

I'm not exactly sure of what you asking here. Using the LFO out as the carrier will produce temolo effects in much the same way as if you set the frequency of the carrier to LFO levels which at sub audio levels will produce a tremolo effect. A square wave will produce a "trill" like sound like flip...
by Bryan T
Thu Dec 17, 2009 9:10 pm
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

Just patched it up and the Mix knob still regulates the amount of modulation but the LFO Amount knob doesn't do anything (of course). Does it act the same as when you us the internal carrier? With my old ring mod I found that the shape of the tremolo effect changed based on where the mix knob was s...
by Bryan T
Thu Dec 17, 2009 8:35 pm
Forum: Moogerfooger Forum
Topic: Ring mod question
Replies: 38
Views: 6117

Ring mod question

I'm curious what happens when you patch the LFO Out to the Carrier In. In particular, using a square wave, what is the effect of the mix knob? Does it still change the amplitude envelope?
by Bryan T
Thu Dec 17, 2009 8:08 pm
Forum: Minimoog Forum
Topic: Newbie Voyager question - tremolo
Replies: 10
Views: 1879

analoghaze wrote:The Mooger RM 102 can "act" as a superb Tremolo on the low setting.
True, but it can't do the effect he is looking for, namely slowly increasing the intensity of the effect. It seems like the mix knob would do that, but on mine it changed the shape of the amplitude envelope.
by Bryan T
Thu Dec 17, 2009 6:36 pm
Forum: Minimoog Forum
Topic: Newbie Voyager question - tremolo
Replies: 10
Views: 1879

I think you want to invert/attenuate the waveform and use the offset in the mixer section of the CP-251. The square wave normally goes between 0 and +5 Volts. Inverting it will make it go from 0 to -5 Volts. Using the offset to increase the voltage can make it go from 5 to 0 Volts. Then you can cont...
by Bryan T
Wed Dec 16, 2009 4:32 am
Forum: Moog Music General Topics Forum
Topic: what should moog release next?
Replies: 410
Views: 150714

moremagic wrote:
Bryan T wrote:I think Moog should release the Bryan T starter pack. It would combine an Old School Voyager, a Moog guitar, and an MP-201. Priced at $1499.

Pretty please?
No VX-351? What a ripoff!
Free VX-351 included during the NAMM promotion.
by Bryan T
Wed Dec 16, 2009 3:05 am
Forum: Moog Music General Topics Forum
Topic: Moogless
Replies: 13
Views: 1876

CTRLSHFT wrote:get yourself a MF-101 and sooth the burn stat! :)
Ironically, I mailed that to the new owner yesterday.