Search found 1579 matches

by latigid on
Wed Aug 31, 2016 8:26 am
Forum: Moogerfooger Forum
Topic: MF-102 Ring Mod / is there a built in noise gate?
Replies: 5
Views: 1482

Re: MF-102 Ring Mod / is there a built in noise gate?

Yep, normal. There's a squelch circuit that prevents carrier bleed.
by latigid on
Mon Aug 29, 2016 3:50 am
Forum: Moogerfooger Forum
Topic: CP-251 sync
Replies: 7
Views: 1785

Re: CP-251 sync

Often a pulse is used, the idea being that the rising (or in some cases falling) edge of the transition triggers the input. As opposed to a gate where the "on" or "high" time represents a key being held, an envelope sustaining etc. So, does the patched squarewave work? Something ...
by latigid on
Mon Aug 29, 2016 2:35 am
Forum: Moogerfooger Forum
Topic: CP-251 sync
Replies: 7
Views: 1785

Re: CP-251 sync

Is the normalised connection of the CP-251 squarewave working? I.e. do you get a "normal" S&H whose rate changes with the LFO freq? How did you set the Clockworks level? Hopefully you followed the instructions starting from 0V and just going as high as was needed. It's unlikely, but th...
by latigid on
Thu Aug 25, 2016 5:52 pm
Forum: Moogerfooger Forum
Topic: Best Sequencer for Multiple Moogerfoogers?
Replies: 23
Views: 4164

Re: Best Sequencer for Multiple Moogerfoogers?

https://koma-elektronik.com/?product=komplex-sequencer

Image



Multiple sequences: check
Patch storage: check
Similar aesthetics to Moog: somewhat check

3.5mm jack connectors: check
over $700: check


Or did you mean this one:
https://koma-elektronik.com/?product=ft ... -sequencer
?
by latigid on
Fri Aug 12, 2016 8:23 am
Forum: Moog Music General Topics Forum
Topic: Moog font "O"
Replies: 8
Views: 2169

Re: Moog font "O"

It's the umlaut (in stylised form) that indicates how to pronounce "Moog" properly.
by latigid on
Sun Jul 31, 2016 2:41 am
Forum: Moog Music General Topics Forum
Topic: Moog Prodigy: do capacitors model/type affect the sound?
Replies: 17
Views: 2682

Re: Moog Prodigy: do capacitors model/type affect the sound?

In general it's the electrolytics in the power supply that you need to worry about. In the audio signal chain, the high-value caps are likely to be used for timing (more for CV though), or AC coupling (i.e. removing DC offset). What do you want; "coloured sound" or something closer to the ...
by latigid on
Sun Jul 31, 2016 2:33 am
Forum: Moogerfooger Forum
Topic: Why no Mix knob on Phaser?? Why??
Replies: 8
Views: 2150

Re: Why no Mix knob on Phaser?? Why??

Phase shifters are all-pass filters with resonant notches. To get the classic "wooshing" sound, you need to compare the filtered sound to the original input. The resonance control effectively works as an FX mix: as you lower the resonance the all-pass filter becomes flatter and its output ...
by latigid on
Tue Jul 26, 2016 2:39 pm
Forum: Minimoog Forum
Topic: Mod amount
Replies: 4
Views: 2189

Re: Mod amount

Did you try using the mod wheel as a source? You can fade modulation in very easily that way.
by latigid on
Sun Jul 24, 2016 12:26 pm
Forum: Moog Music General Topics Forum
Topic: M #1126 Prodigy - All Keys Play the Same Note
Replies: 6
Views: 1985

Re: M #1126 Prodigy - All Keys Play the Same Note

Did you try using the external CV input? Check for tarnishing on that jack too (if it carries the KB voltage through a normalised connection).
by latigid on
Sun Jul 10, 2016 1:55 pm
Forum: Moogerfooger Forum
Topic: popping from lfo
Replies: 7
Views: 3179

Re: popping from lfo

What you want is a lag processor or low pass filter to smooth the sharp transitions. It's very easy to make a passive LPF with just a resistor and a capacitor, they can even be built into 1/4" cables.
by latigid on
Thu Jun 30, 2016 11:02 am
Forum: Minimoog Forum
Topic: Noise on the Oscillators
Replies: 7
Views: 2240

Re: Noise on the Oscillators

Is it limited to any particular oscillator? This info you can give to your tech to look a bit closer.
by latigid on
Thu Jun 30, 2016 10:31 am
Forum: Minimoog Forum
Topic: Noise on the Oscillators
Replies: 7
Views: 2240

Re: Noise on the Oscillators

Hmm, hard to say. You don't have a "backlight" in the way that an Electric Blue or Anniversary Edition does, so that eliminates the whine from the EL inverter/PSU. Seems like the noise really is entering before the filter if it's being filtered out after. Can you change the "noise&quo...
by latigid on
Thu Jun 30, 2016 3:41 am
Forum: Minimoog Forum
Topic: Noise on the Oscillators
Replies: 7
Views: 2240

Re: Noise on the Oscillators

Please try to keep everything in one post. What model Voyager/SN do you have? New or second hand? What kind of noise? Breathy white noise or more like a whine from a digital source? Is the noise from the actual noise source running into the mixer? Set an init patch and experiment switching on/off al...
by latigid on
Tue Jun 28, 2016 12:03 pm
Forum: Moog Music General Topics Forum
Topic: RUMORS - not of the Fleetwood Mac nature
Replies: 20
Views: 7282

Re: RUMORS - not of the Fleetwood Mac nature

According to the article it is the Polymoog Prototype being exhibited. No mention of a new one.
by latigid on
Mon Jun 27, 2016 12:12 pm
Forum: Moog Music General Topics Forum
Topic: Post your latest purchase!!
Replies: 1438
Views: 183893

Re: Post your latest purchase!!

In a nutshell, I didn't like it. A potentially fantastic machine on paper, but it is not a mature product yet. And some of its problems are hardware design based, and not correctable in firmware. Only the aesthetics and the ergonomy were excellent on it. More specifics please! Filter/osc/tuning/par...