Search found 503 matches

by Alien8
Mon Sep 01, 2014 10:50 pm
Forum: Moogerfooger Forum
Topic: 105M does it suit me? All input appreciated!
Replies: 10
Views: 2057

Re: 105M does it suit me? All input appreciated!

No worry :wink: I made you a demo: https://soundcloud.com/alien8-3/murfing-around Playing a real bass, through a synth pedal into the MF-101 filter some other pedals (comp & DI) for tone, then into the MuRF. Rough takes with warts n'stuff, but gives you the idea. I made my own pattern with the botto...
by Alien8
Fri Aug 29, 2014 12:25 pm
Forum: Moogerfooger Forum
Topic: 105M does it suit me? All input appreciated!
Replies: 10
Views: 2057

Re: Curious about Midi Murf - questions and need for decent

Reading the manual for the pattern editor, you can save "panel" presets - I don't know if those are saved to the pattern in the unit, or just in the editor on the PC. If the latter is the case, you would need a PC to manually select the preset you wish to load. Next time I have it on I will try this...
by Alien8
Fri Aug 29, 2014 12:06 pm
Forum: Moogerfooger Forum
Topic: 105M does it suit me? All input appreciated!
Replies: 10
Views: 2057

Re: Curious about Midi Murf - questions and need for decent

1. Yes and no. There are ways to trick it into doing this, but it would be specific to the pattern that you create. There are a couple of ways to trigger the MuRF that can get very granular in control, however more of an on / off response than not. So - you can trigger the step of your pattern to fi...
by Alien8
Fri Aug 29, 2014 9:31 am
Forum: Moogerfooger Forum
Topic: Midi Murf TAP/Step issues with footswitch
Replies: 4
Views: 1432

Re: Midi Murf TAP/Step issues with footswitch

I played more with my MuRF, and have more to add to this "issue". To clearly define what is happening from my perspective; when the Tap footswitch (using Moog FS-1) is plugged into the unit and powered on, the foot switch does not respond. When you remove the plug from the Tap / Step input and re-in...
by Alien8
Wed Aug 27, 2014 9:26 am
Forum: Moogerfooger Forum
Topic: MIidi Murf hiss!
Replies: 23
Views: 3161

Re: MIidi Murf hiss!

Given that you have only tried to band-aid the problem by changing the location of the pedal, you certainly have not found the root cause of the issue. Likely the MuRF is amplifying noise that is present in front of your amplifier, and to come here and make all sorts of claims against Moog is ridicu...
by Alien8
Tue Aug 26, 2014 7:34 pm
Forum: Controllers Forum
Topic: MP-201 midi with Strymon pedals
Replies: 3
Views: 3603

Re: MP-201 midi with Strymon pedals

As always: read the manual. Seriously. You would have found that you can do some of what you ask but not all. It took me 5 minutes to find your answer. Program changes for example are possible through MIDI. You could use MIDI or CV (or both!) to act as an "expression" input for the timeline as well.
by Alien8
Wed Aug 20, 2014 9:10 am
Forum: Moogerfooger Forum
Topic: CV line selector for pedalboard?
Replies: 9
Views: 2121

Re: CV line selector for pedalboard?

T-Rex sells a stereo AB box that would work if you used "insert" cables (one end TRS, other end two TS one to tip and one to sleeve).

Otherwise DIY will be much cheaper.

Using what you have, the CP-251 has a mixer that can be controlled with an Expression pedal, and many other possibilities.
by Alien8
Sun Aug 17, 2014 12:07 pm
Forum: Moogerfooger Forum
Topic: my next fooger?
Replies: 3
Views: 742

Re: my next fooger?

I'm going to recommend the MuRF to you. Reason is that it offers you something you don't yet have being animation & synchronizing via lots of options. The ring mod, phaser and flux are all great, but in your case they may be just really cool sounding effects as their extended uses are already covere...
by Alien8
Sun Aug 17, 2014 11:53 am
Forum: Moogerfooger Forum
Topic: MF-108M - Did I fry it?
Replies: 3
Views: 935

Re: MF-108M - Did I fry it?

If it's a little stubby red cable it's likely the one from Godlyke which are unreliable. You are probably ok, but best to wait for the correct psu.
by Alien8
Sun Aug 17, 2014 11:50 am
Forum: Moogerfooger Forum
Topic: Murf - Using FS-1 for tap tempo & pattern switching
Replies: 3
Views: 1052

Re: Murf - Using FS-1 for tap tempo & pattern switching

...was in the music store yesterday and saw an M-audio version that *may* work. It was $21.
by Alien8
Sat Aug 16, 2014 8:58 am
Forum: Minifooger Forum
Topic: 1975 MXR Distortion plus or MF-Drive ?
Replies: 4
Views: 1713

Re: 1975 MXR Distortion plus or MF-Drive ?

Moog all the way. Comes with a warranty & offers a wide pallet of tonal satisfaction.
by Alien8
Wed Aug 13, 2014 6:10 pm
Forum: Moogerfooger Forum
Topic: Murf - Using FS-1 for tap tempo & pattern switching
Replies: 3
Views: 1052

Re: Murf - Using FS-1 for tap tempo & pattern switching

Just checked the Roland website, and the version you have is a latched type, meaning that it won't work, or rather will produce tapped tempos at 50%. Look for an "unlatched" or momentary switch. The Moog one is a normally closed momentary. You can get around the step adapter with a stereo Y cable (t...
by Alien8
Wed Aug 06, 2014 5:41 pm
Forum: Moogerfooger Forum
Topic: MF-102 Synchronize With Slicer/Other Pedals?
Replies: 12
Views: 1380

Re: MF-102 Synchronize With Slicer/Other Pedals?

I'm fairly certain that the MF-102 isn't used in this track (I could be wrong tho). It sounds & looks (to me) like a combination of Zoothorn, sampler, slicer and pitch shifting. Mic feedback into a RC-20 looper, (maybe the RingMOD here) into the POG. This into the slicer and then looped from there. ...
by Alien8
Tue Aug 05, 2014 10:18 am
Forum: Moogerfooger Forum
Topic: How to get a Mix knob on the MF-103 Phaser?
Replies: 9
Views: 1281

Re: How to get a Mix knob on the MF-103 Phaser?

The Boss LS-2 would be a work around solution - easy to control, but not a single direct MIX knob. Low-ish cost. The Pigtronix Keymaster will do what you want. Pricy tho, unless you have other uses for it. Edit: Xotic FX makes one too, more to the point of what you want, with all the bells and whist...
by Alien8
Sun Jul 27, 2014 11:58 am
Forum: Moogerfooger Forum
Topic: CP-251, 104M and?
Replies: 14
Views: 2615

Re: CP-251, 104M and?

Judging from what you have already, MIDI is a more powerful option for you from a control perspective. Unless you are set on analog control, I say ditch the second CP & get a good MIDI controller that unifies all of your super powers.