Search found 33 matches

by paddy ryan
Sun May 09, 2021 1:25 pm
Forum: Moog One
Topic: Arp behavior
Replies: 6
Views: 524

Re: Arp behavior

I see this behaviour when the ARP clock is synced (delayed start of ARP after pressing a key). I see a similar problem in the Sequencer when triggering the sequencer with a key. More often than not, the first note of the sequence is missed. If I press start in the sequencer, it is fine. Start with a...
by paddy ryan
Mon Feb 22, 2021 1:29 pm
Forum: Moog One
Topic: Can't get support from Moog
Replies: 8
Views: 1097

Re: Can't get support from Moog

I have given up communicating with MOOG about bugs on the ONE. I never hear back. It really is disappointing. They need to fix this problem. Us users have no idea which bugs have been acknowledged, which are being looked at and should be fixed, which ones aren't, what features they may be considerin...
by paddy ryan
Mon Feb 22, 2021 1:24 pm
Forum: Moog Semi-Modular Analog Synthesizers
Topic: Subharmonicon Sub Osc Peculiarity?
Replies: 1
Views: 240

Re: Subharmonicon Sub Osc Peculiarity?

that just sounds like phase cancellation, which becomes more evident in low frequencies. That's normal for un-synced oscillators...as they drift in and out of phase with each other.

Detuning slightly should help
by paddy ryan
Fri May 15, 2020 10:58 am
Forum: Moog One
Topic: Transpose not independant for parts
Replies: 2
Views: 605

Transpose not independant for parts

When working with split or layered parts, it would be VERY helpful if the keyboard transpose could be independent for each part. This way the left side of the keyboard can be used for other than low notes (or the right other than high notes...). With independant Transpose settings, each region could...
by paddy ryan
Wed Apr 22, 2020 1:38 pm
Forum: Moog One
Topic: FX 1 distorting
Replies: 2
Views: 721

FX 1 distorting

Is anyone else getting distortion sometimes when running through effect 1 (synth effect)? Some of my patches distort when that effect is enabled, and not at all when disabled....
by paddy ryan
Tue Dec 24, 2019 7:40 pm
Forum: Moog One
Topic: MOOG not recognizing new firmware file
Replies: 14
Views: 2304

MOOG not recognizing new firmware file

I have firmware 1.2.0 on my usb stick, but when I try to update firmware I am getting a "no firmware files found" error. I can import the new presets off the usb stick, as well as back up my user space. I can see the firmware file on the stick, in root directory, on my computer. But MOOG O...
by paddy ryan
Wed Nov 06, 2019 9:34 pm
Forum: Moog One
Topic: EXP Pedal Mod source doesn't work properly
Replies: 6
Views: 1881

Re: EXP Pedal Mod source doesn't work properly

this is indeed fixed with firmware 1.1.0!!

a setting of about 20% gives a full filter sweep from heal to toe
by paddy ryan
Sat Sep 28, 2019 7:49 pm
Forum: Moog One
Topic: EXP Pedal Mod source doesn't work properly
Replies: 6
Views: 1881

Re: EXP Pedal Mod source doesn't work properly

Have you even read my post before replying? My pedal works fine. It has nothing to do with the pedal! If I assign wheel, aftertouch, x, y, pad pressure or any other source to a filter, and set the mod amount to say 50%, the filter will not be affected by the modulation until I generate some data fro...
by paddy ryan
Fri Sep 27, 2019 4:55 pm
Forum: Moog One
Topic: EXP Pedal Mod source doesn't work properly
Replies: 6
Views: 1881

EXP Pedal Mod source doesn't work properly

Assigning EXP1 or EXP2 (to anything) doesn't work as it should. There should be no control effect until the pedal is above 0. Currently, the destination gets the set modulation amount even while the pedal is still at 0, or even if there is no pedal plugged in to the jack! EXP assignment should work ...
by paddy ryan
Fri Sep 27, 2019 4:51 pm
Forum: Moog One
Topic: Modulating synth VCA
Replies: 7
Views: 5819

Re: Modulating synth VCA

Sure I can do a workaround with the Constant parameter and make a pedal useable in the case of VCA control. But for any actually accurate control it is not a solution. My point is that assigning EXP1 or EXP2 (to anything) doesn't work as it should. There should be no control effect until the pedal i...
by paddy ryan
Tue Aug 13, 2019 11:50 pm
Forum: Moog One
Topic: Singularity Vol 1 - For The Moog One
Replies: 18
Views: 8818

Re: Singularity Vol 1 - For The Moog One

In spite of feeling like I should do my own patches because it's so much fun, I did get this set of patches today. Gotta say, they are great. Out of the 128 patches, a good 90% I found very useable. And also great starting points to build similar patches to your own taste. WAY better than the factor...
by paddy ryan
Tue Jul 30, 2019 12:55 pm
Forum: Moog One
Topic: Modulating synth VCA
Replies: 7
Views: 5819

Re: Modulating synth VCA

Also worth noting, the Expression Pedal(s) do not behave properly as controllers (yet...?!). With any other controllers, when you assign a mod. destination and amount, the resulting modulation is based on the position of that controller. For example, if the controller is at 0, the resulting mod amou...
by paddy ryan
Mon Jul 08, 2019 12:17 pm
Forum: Moog One
Topic: Apple keyboards...can we have a fix?
Replies: 12
Views: 5087

Re: Apple keyboards...can we have a fix?

FWIW.... my Apple keyboards do not work either. I guess I should just pick up a cheap PC keyboard ...
by paddy ryan
Sun Jul 07, 2019 3:18 am
Forum: Moog One
Topic: Using ONE with external control/DAW sequencer
Replies: 2
Views: 3044

Re: Using ONE with external control/DAW sequencer

Yes. Clock works properly...no problem there.

But nothing else does!
by paddy ryan
Fri Jul 05, 2019 3:15 pm
Forum: Moog One
Topic: Using ONE with external control/DAW sequencer
Replies: 2
Views: 3044

Using ONE with external control/DAW sequencer

There is a long way to go to get the ONE useable with an external controller or sequencer! When using the ARP with an external controller, you have to have the keyboard ON on the MOOG to enable the ARP. ButiIt responds by playing the held notes until the sequencer gets to them...then it releases the...