Search found 27 matches

by paddy ryan
Wed Nov 06, 2019 9:34 pm
Forum: Moog One
Topic: EXP Pedal Mod source doesn't work properly
Replies: 6
Views: 948

Re: EXP Pedal Mod source doesn't work properly

this is indeed fixed with firmware 1.1.0!!

a setting of about 20% gives a full filter sweep from heal to toe
by paddy ryan
Sat Sep 28, 2019 7:49 pm
Forum: Moog One
Topic: EXP Pedal Mod source doesn't work properly
Replies: 6
Views: 948

Re: EXP Pedal Mod source doesn't work properly

Have you even read my post before replying? My pedal works fine. It has nothing to do with the pedal! If I assign wheel, aftertouch, x, y, pad pressure or any other source to a filter, and set the mod amount to say 50%, the filter will not be affected by the modulation until I generate some data fro...
by paddy ryan
Fri Sep 27, 2019 4:55 pm
Forum: Moog One
Topic: EXP Pedal Mod source doesn't work properly
Replies: 6
Views: 948

EXP Pedal Mod source doesn't work properly

Assigning EXP1 or EXP2 (to anything) doesn't work as it should. There should be no control effect until the pedal is above 0. Currently, the destination gets the set modulation amount even while the pedal is still at 0, or even if there is no pedal plugged in to the jack! EXP assignment should work ...
by paddy ryan
Fri Sep 27, 2019 4:51 pm
Forum: Moog One
Topic: Modulating synth VCA
Replies: 7
Views: 4759

Re: Modulating synth VCA

Sure I can do a workaround with the Constant parameter and make a pedal useable in the case of VCA control. But for any actually accurate control it is not a solution. My point is that assigning EXP1 or EXP2 (to anything) doesn't work as it should. There should be no control effect until the pedal i...
by paddy ryan
Tue Aug 13, 2019 11:50 pm
Forum: Moog One
Topic: Singularity Vol 1 - For The Moog One
Replies: 18
Views: 6566

Re: Singularity Vol 1 - For The Moog One

In spite of feeling like I should do my own patches because it's so much fun, I did get this set of patches today. Gotta say, they are great. Out of the 128 patches, a good 90% I found very useable. And also great starting points to build similar patches to your own taste. WAY better than the factor...
by paddy ryan
Tue Jul 30, 2019 12:55 pm
Forum: Moog One
Topic: Modulating synth VCA
Replies: 7
Views: 4759

Re: Modulating synth VCA

Also worth noting, the Expression Pedal(s) do not behave properly as controllers (yet...?!). With any other controllers, when you assign a mod. destination and amount, the resulting modulation is based on the position of that controller. For example, if the controller is at 0, the resulting mod amou...
by paddy ryan
Mon Jul 08, 2019 12:17 pm
Forum: Moog One
Topic: Apple keyboards...can we have a fix?
Replies: 12
Views: 3596

Re: Apple keyboards...can we have a fix?

FWIW.... my Apple keyboards do not work either. I guess I should just pick up a cheap PC keyboard ...
by paddy ryan
Sun Jul 07, 2019 3:18 am
Forum: Moog One
Topic: Using ONE with external control/DAW sequencer
Replies: 2
Views: 1823

Re: Using ONE with external control/DAW sequencer

Yes. Clock works properly...no problem there.

But nothing else does!
by paddy ryan
Fri Jul 05, 2019 3:15 pm
Forum: Moog One
Topic: Using ONE with external control/DAW sequencer
Replies: 2
Views: 1823

Using ONE with external control/DAW sequencer

There is a long way to go to get the ONE useable with an external controller or sequencer! When using the ARP with an external controller, you have to have the keyboard ON on the MOOG to enable the ARP. ButiIt responds by playing the held notes until the sequencer gets to them...then it releases the...
by paddy ryan
Fri Jul 05, 2019 3:04 pm
Forum: Moog One
Topic: Moog Please Fix Envelope Sync / Loop Issue.
Replies: 2
Views: 1816

Re: Moog Please Fix Envelope Sync / Loop Issue.

What would be REALLY nice would be the ability to set a beat division (say one beat, four beats, whatever) for the entire envelope cycle... so your loop would always be in sync, and you could tweak the stages and they would adjust relative to the overall timing of the envelope. Otherwise, if you cha...
by paddy ryan
Thu Jul 04, 2019 1:18 pm
Forum: Moog One
Topic: Firmware update frozen
Replies: 4
Views: 2065

Re: Firmware update frozen

It wasn't the MOOG USB thumb drive, but one i have used on another MOOG ONE with no problem.

It read the file fine, it was only after the restart that the problem occurred. Hopefully I'll never see that again!
by paddy ryan
Thu Jul 04, 2019 10:13 am
Forum: Moog One
Topic: Firmware update frozen
Replies: 4
Views: 2065

Re: Firmware update frozen

UPDATE:

Since I didn't know what else to do, I restarted again. Same thing happened.

After waiting another 45 minutes, I did one last hail mary and I restarted AGAIN, and it booted up normally, with the new firmware successfully installed.

It has been fine since.

Phew!

:)
by paddy ryan
Wed Jul 03, 2019 8:24 pm
Forum: Moog One
Topic: Firmware update frozen
Replies: 4
Views: 2065

Firmware update frozen

After running the firmware update 1.06, and after restarting when prompted, my ONE came up with the "updating voice card firmware" message on the screen (which is normal). What is NOT normal is that it has been frozen on that screen ever since... (almost an hour now). Has anyone experience...
by paddy ryan
Wed May 08, 2019 12:52 pm
Forum: Moog One
Topic: 1.05 bugs
Replies: 6
Views: 2547

Re: 1.05 bugs

Making your own patches should not make it unstable! I had the same issue (16v). Especially after a while, it would get so out of tune I would have to reset the machine!
by paddy ryan
Wed Apr 17, 2019 6:18 pm
Forum: Moog One
Topic: 1.04 Bugs
Replies: 15
Views: 5163

Re: 1.04 Bugs

I to have noticed the FX causing artifacts.

It seems inconsistent...it may actually be related to some particular patches ...must test some more, but I have definitely made patches where this did not occur