Search found 337 matches

by Markyboard
Mon Jul 05, 2021 7:39 am
Forum: Modular Forum
Topic: Spring reverb recommendations?
Replies: 44
Views: 720

Re: Spring reverb recommendations?

Ah - very good to hear that's working Charlie. I never considered running these high level type signals (Eurorack in my case) directly to anything other then euro compatible modules or a mixer input. Still good to know the upper input limit of that EXTC reamper.
by Markyboard
Sun Jul 04, 2021 10:15 pm
Forum: Modular Forum
Topic: Spring reverb recommendations?
Replies: 44
Views: 720

Re: Spring reverb recommendations?

Apologies for not being clear. You must use the effect send out of the EXTC Reamp in order to attenuate (reduce) the signal level at its input. This is intended to be connected to the input of an effects pedal or in your case the DrZ Reverb unit. You may want to read the paragraph after my “rant” in...
by Markyboard
Sun Jul 04, 2021 3:52 pm
Forum: Modular Forum
Topic: Spring reverb recommendations?
Replies: 44
Views: 720

Re: Spring reverb recommendations?

Anxiously awaiting to hear the results of using the send output of the EXTC.
by Markyboard
Sun Jul 04, 2021 10:02 am
Forum: Modular Forum
Topic: Spring reverb recommendations?
Replies: 44
Views: 720

Re: Spring reverb recommendations?

ARGGGGG! Ok, I’m going on a mild rant here but I also think I have the answer to your issue. Reading manufacturers specs is always an adventure, and more often than not just total BS. Why? Because they often specify numbers to look good ( better than the competition) and offer little explanation as ...
by Markyboard
Sun Jul 04, 2021 7:12 am
Forum: Modular Forum
Topic: Spring reverb recommendations?
Replies: 44
Views: 720

Re: Spring reverb recommendations?

Hey Charlie- I love this topic as I’m always investigating these signal characteristics of all kinds of equipment. And I too am always learning something new. “When I introduce the Radial EXTC-SA inline between the Model 10 and the mixer I get all sorts of cracks/pops/distortion” To clarify you’ve t...
by Markyboard
Sat Jul 03, 2021 9:41 am
Forum: Modular Forum
Topic: Spring reverb recommendations?
Replies: 44
Views: 720

Re: Spring reverb recommendations?

Hi Charlie-

I have the same Radial Reamp that I use for my MF-105 phaser fed from my mixer effects send at 4dB. Everything you describe makes sense and the Reamp should do exactly what you want. What is the signal strength/ range of the System 10 output?

Doesn’t make sense and I am perplexed.
by Markyboard
Fri Jul 02, 2021 11:46 am
Forum: Modular Forum
Topic: dipping into modular advice?
Replies: 13
Views: 345

Re: dipping into modular advice?

Do you have the VX-351 CV expander with your Voyager? If so with a CP-251 or equivalent type inverter/attenuverter type function you can invert the keyboard gate signal
by Markyboard
Sat Jun 26, 2021 7:20 am
Forum: Moog Music General Topics Forum
Topic: Memorymoog only works in Mono mode
Replies: 4
Views: 101

Re: Memorymoog only works in Mono mode

Hi- not sure how your last reply shows up before mine. But anyway, glad that worked. As to the 0 voices tuned you’re in for some fun now. Hope you have a good understanding of how the autotune works. If not you’ll have to study the schematics and circuit descriptions.. I’’m happy to answer specific ...
by Markyboard
Fri Jun 25, 2021 7:10 pm
Forum: Moog Music General Topics Forum
Topic: Memorymoog only works in Mono mode
Replies: 4
Views: 101

Re: Memorymoog only works in Mono mode

There is a set of Reset Test Points - connector P49 on the digital Board . Short either of the 2 ground pins to the reset pin.
by Markyboard
Wed Jun 16, 2021 5:28 pm
Forum: Moog Music General Topics Forum
Topic: Aladdin's Cave
Replies: 7
Views: 301

Re: Aladdin's Cave

Awesome post - thanks Michael!

Will have to arrange a tour as part of a day visit to Phili.
by Markyboard
Mon May 31, 2021 12:25 pm
Forum: Controllers Forum
Topic: MP201 light on, blank screen?
Replies: 2
Views: 2811

Re: MP201 light on, blank screen?

No way to tell without someone opening it up and troubleshooting. Everything else is just a guess at best.

I’d contact Moog service. Good luck
by Markyboard
Thu May 13, 2021 6:08 am
Forum: Minimoog Forum
Topic: Voyager OS tuning / calibration
Replies: 4
Views: 307

Re: Voyager OS tuning / calibration

TheDigitalMan wrote: Tue May 11, 2021 3:50 pm I'm going to try 'this' procedure - fingers crossed.

viewtopic.php?f=2&t=32485&p=174363&hili ... ration#top
I saw that my paste job was incomplete in the referenced thread. I've since edited it with the entire procedure provided.
by Markyboard
Wed May 12, 2021 7:15 am
Forum: Moogerfooger Forum
Topic: Switch for Expression Pedal
Replies: 3
Views: 220

Re: Switch for Expression Pedal

Ah, that’s a bit different now. In the development world (differentiated from the developed world) we call that scope creep :mrgreen: . Wasn’t aware of that Mission Engineering box-very cool. The other one to look for (used) is a Moog MP-201 pedal/processor. It’ll do what you want with 4 cv outputs ...
by Markyboard
Tue May 11, 2021 7:29 am
Forum: Moogerfooger Forum
Topic: Switch for Expression Pedal
Replies: 3
Views: 220

Re: Switch for Expression Pedal

Here's one for Intellijel Eurorack frames:

https://intellijel.com/shop/eurorack/1u ... d-mult-1u/
by Markyboard
Sat Apr 24, 2021 1:00 pm
Forum: Moog Semi-Modular Analog Synthesizers
Topic: Matriarch-midi automation on cutoff filter
Replies: 7
Views: 1308

Re: Matriarch-midi automation on cutoff filter

Hi Allan- You're not doing anything wrong. In most cases the Matriarch does not route the assigned CCs to the hardware output jacks. Instead those CCs are controlling the destination(s) through internal hardware connections. For example where the midi mapping document shows CC 1 controlling the mod ...