Moog Music Forum

For correct operation, it is necessary to correctly adjust the central circuit of the fixed generator with a red plastic screwdriver. Attention! Hearts are very fragile! Very carefully and only with a plastic screwdriver from the kit.

Hello! I accidentally made a mistake in the numbering of connector theremin (right picture). You need to define counter-clockwise: first from right, third from the left. But on the schema the adapter is not affected.
The design of the adapter is correctly.

The Theremini is very sensitive to ambient radio waves from different devices. I think that much depends on the specific instance of the Theremini. Proper calibration can be very useful, but it should be carried out correctly and different presets work with it with different results. Much easier to ...

Thanks for the reply. I had the Theremini, which worked wonderfully classic feature of the theremin. But after a while this feature in itself has stopped working. Now I have another device and these functions are also not working.

Unfortunately the mode of transfer of notes in the Theremini is not working. Maybe it will be implemented in future firmware versions. Available only send messages of type CC. as a variant it is possible to use the Sonuus G2M device that converts any audio signal into MIDI notes. By the way I want t...

Have Fun!

The adapter is a step-down transformer AC to AC. With the output 14 VAC, 200 mA. You can use a 3 pin connector, since the pin 4 and 5 are not used. Attach a drawing of the electrical circuit.

New firmware version 1.1.0 and 1.1.1 have mode "mode ON the Theremin" in advanced settings. If this treatment works, the EFFECT becomes the volume control audio outputs, and volume control continues to adjust the volume of the headphones. When the PITCH fader works as antenna configuration...

In some cases, you can use a simple adapter to the desired outlet connection.

Good day! I have long been fond of playing the theremin. Often have to speak and play in front of the audience. I Have The Moog Etherwave Plus and recently purchased a Theremini. Testing multiple instances Theremini found out the following: the latest firmware has a mode "Thermin mode On" ...

For Etherwave Standard and Plus need special power supplies - can be purchased here: http://www.instrumentalparts.com/moetsppa.html

From my experience... I was also looking for such power, and small size, but powerful enough. Suddenly, I brought "ROLAND MOBILE-AC". Despite the stated capacity of small and very small sizes it runs loud enough to announce the hall of medium size. Subjective feeling - 10-15 Watt. It is st...

Numans2 wrote:hi just ordered an etherwave plus what mic stand adaptor and or screw do i need?
cheers

Without mikrofonai stand a Theremin will not work correctly. Sometimes at the front already have the necessary adapter.