Search found 10 matches
- Mon Nov 05, 2018 12:31 pm
- Forum: Minimoog Forum
- Topic: Model-D Reissue - MIDI bugginess
- Replies: 22
- Views: 27609
Re: Model-D Reissue - MIDI bugginess
After receiving my new Model D, I have confirmed Issue #1 and Issue #2, as described above. With Issue #1, there is a workaround; that is, set the D to use last note priority. Not ideal, but usable. Unfortunately, there is no workaround for Issue #2, which means it is not possible to use the D as a ...
- Tue Oct 30, 2018 1:34 pm
- Forum: Minimoog Forum
- Topic: Model-D Reissue - MIDI bugginess
- Replies: 22
- Views: 27609
Re: Model-D Reissue - MIDI bugginess
With local control off , notes are transmitted, as one would expect. Unfortunately, if they are round tripped back into the Model D (standard use of local control off ), the unit seems to filter out incoming notes! If the minimoog is receiving a sequence and i change the pyramid to send on a differ...
- Mon Dec 25, 2017 8:07 pm
- Forum: Subsequent 37 & Subsequent 25
- Topic: Sub 37 bug? Ratchet counts not cleared in sequencer
- Replies: 0
- Views: 13676
Sub 37 bug? Ratchet counts not cleared in sequencer
Is this a bug? Repro steps: 1. Create a sequence 2. Add some ratchet counts on some of the steps 3. Clear the sequencer by setting the pattern knob to REC and playing a new step 4. Create a new sequence 5. Play the new sequence 6. Notice the ratchet steps from the original sequence are still set eve...
- Tue Aug 30, 2016 2:43 pm
- Forum: Subsequent 37 & Subsequent 25
- Topic: Sub 37 - ST1 RESET - Bug?
- Replies: 2
- Views: 1277
Re: Sub 37 - ST1 RESET - Bug?
Thanks for the reply. I ended up using Expert Sleepers Silent Way Sync plugin to send a reset signal from my DAW through my RME UFX to the Moog. Works great.
- Sun Aug 07, 2016 6:23 pm
- Forum: Subsequent 37 & Subsequent 25
- Topic: Sub 37 - ST1 RESET - Bug?
- Replies: 2
- Views: 1277
Sub 37 - ST1 RESET - Bug?
Per the manual: Step 1 Reset causes the Arp or Sequencer to restart at step 1 any time a voltage trigger (voltage RISING from below 2.5 volts to greater than 2.5 volts) is detected at the CV input. When I send a CV run signal, which rises and stays high until I hit stop, the Sub 37 always stays on t...
- Mon Nov 17, 2014 10:36 pm
- Forum: Subsequent 37 & Subsequent 25
- Topic: Sub 37 - USB MIDI In Port Dies when using PB wheel - Bug?
- Replies: 6
- Views: 2284
Re: Sub 37 - USB MIDI In Port Dies when using PB wheel - Bug
1.0.6. Also happend on 1.0.4.
- Mon Nov 17, 2014 12:08 pm
- Forum: Subsequent 37 & Subsequent 25
- Topic: Sub 37 - USB MIDI ports stop working after locking computer
- Replies: 1
- Views: 916
Re: Sub 37 - USB MIDI ports stop working after locking compu
This issue seems to have abated after changing my USB ports suspend and power management settings; however, as I mentioned my other thread, the Sub 37's USB MIDI still seems shaky and buggy.
- Mon Nov 17, 2014 12:05 pm
- Forum: Subsequent 37 & Subsequent 25
- Topic: Sub 37 - USB MIDI In Port Dies when using PB wheel - Bug?
- Replies: 6
- Views: 2284
Re: Sub 37 - USB MIDI In Port Dies when using PB wheel - Bug
This seems very similar to this person's issue in this thread: http://forum.moogmusic.com/viewtopic.php?f=7&hilit=usb&p=136147&t=22396 I have already tried turning off ECHO USB IN and ECHO DIN IN. And, I've tried multiple USB ports and a dedicated USB 2.0 PCIe card. My other synth (Virus...
- Sun Nov 16, 2014 8:53 pm
- Forum: Subsequent 37 & Subsequent 25
- Topic: Sub 37 - USB MIDI ports stop working after locking computer
- Replies: 1
- Views: 916
Sub 37 - USB MIDI ports stop working after locking computer
This may be related to the other thread I just opened. Steps to reproduce: 1. Make sure the Sub 37 is plugged in and receiving MIDI data (like a loop from a DAW). 2. Lock your computer (Windows). WinKey + L. 3. Notice the Sub 37 USB ports stop working immediately. 4. Unplug/re-plug the USB cable. 5....
- Sun Nov 16, 2014 6:03 pm
- Forum: Subsequent 37 & Subsequent 25
- Topic: Sub 37 - USB MIDI In Port Dies when using PB wheel - Bug?
- Replies: 6
- Views: 2284
Sub 37 - USB MIDI In Port Dies when using PB wheel - Bug?
Steps to reproduce: 1. Send MIDI in data from sequencer to Sub 37 USB port on channel 9. 2. Send MIDI out data from Sub 37 USB port to sequencer on channel 10. 3. Start sequencer. 4. While sequencer is playing move the pitch bend wheel back and forth. 5. Notice hung notes. Notice MIDI in data stops ...