Search found 58 matches

by stewdio
Fri Apr 19, 2019 3:16 pm
Forum: Sub 37, Subsequent 37, Sub Phatty Forum
Topic: saving presets when multitracking?
Replies: 3
Views: 1236

Re: saving presets when multitracking?

I’ve always just set up a duplicate midi track and recorded a sysex buffer send - then the next time I open the session I can get my 37 back exactly the way it was without going through the editor. Fast and easy!
by stewdio
Thu Apr 19, 2018 5:10 pm
Forum: Sub 37, Subsequent 37, Sub Phatty Forum
Topic: Question about Subsequent 37 sync to external
Replies: 1
Views: 477

Re: Question about Subsequent 37 sync to external

You just need to enable sync on the 37 and then as soon as MIDI clock comes in it will sync to it - I use my 37 with Logic all the time and it syncs great. If you have sync enabled and there is no MIDI clock incoming then things like the sequencer / arpeggiator won't work (it won't advance) until th...
by stewdio
Fri Mar 23, 2018 11:57 am
Forum: Grandmother, Mother-32 & DFAM
Topic: HOW do I connect DFAM and M32 to each other??
Replies: 3
Views: 1570

Re: HOW do I connect DFAM and M32 to each other??

is the DFAM playing in sync with the M32 just at a division of the clock? When you sync them the tempo on the DFAM becomes a divider for the clock so you can have it playing along with the M32 at half time or quarter time or whatever but it's still in synch... if it's too slow because it's not synci...
by stewdio
Fri Mar 23, 2018 11:55 am
Forum: Grandmother, Mother-32 & DFAM
Topic: Case for 3 tier setup
Replies: 0
Views: 452

Case for 3 tier setup

Does anyone have a good solution for travelling with a 3 tier setup? I'm thinking of adding to my DFAM and M32 and a 60HP 3 tier would be perfect but not if I have to tear it down every time I need to leave the house...
by stewdio
Wed Mar 14, 2018 11:12 am
Forum: Grandmother, Mother-32 & DFAM
Topic: HOW do I connect DFAM and M32 to each other??
Replies: 3
Views: 1570

Re: HOW do I connect DFAM and M32 to each other??

You can do either of those - take the main out of each synth into it's own input on an external mixer, amplifier, audio interface or you can take the VCA out of the DFAM into the external audio input on the M32 - HOWEVER if you do that, the DFAM signal will also be running through the M32 VCF and VC...
by stewdio
Wed Jan 24, 2018 1:40 pm
Forum: Sub 37, Subsequent 37, Sub Phatty Forum
Topic: Problem SysEX
Replies: 2
Views: 1084

Re: Problem SysEX

what are you recording the SysEx message with? I (most typically) use my 37 with logic, and I have a MIDI track set to the 37's MIDI connection, put the track into record (the press play/record so the transport is moving) and then send the SysEx buffer from the 37. When I play that MIDI region back ...
by stewdio
Mon Jan 22, 2018 3:25 pm
Forum: Grandmother, Mother-32 & DFAM
Topic: DFAM Oscillators with M32
Replies: 3
Views: 618

Re: DFAM Oscillators with M32

stiiiiiiive wrote:Just thinking out loud: to do that, you would need direct oscillators output on the DFAM. Does it have some?


it appears so from this patch template:

https://www.moogmusic.com/sites/default ... te_Web.pdf

and my thinking is that I could blend the DFAM oscillators with the VC mixer on the 32, then take that mixed output into the external audio in...
by stewdio
Mon Jan 22, 2018 11:06 am
Forum: Grandmother, Mother-32 & DFAM
Topic: DFAM Oscillators with M32
Replies: 3
Views: 618

DFAM Oscillators with M32

Are the oscillators the same/similar between the two Mothers? I'm curious if adding a DFAM means I'd be able to make 3 osc patches on the M32 when I'm not using the DFAM for percussion sounds
thanks!
by stewdio
Sun Jan 07, 2018 10:29 am
Forum: Moogerfooger Forum
Topic: MF 104 Time LED stopt blinking
Replies: 4
Views: 1567

Re: MF 104 Time LED stopt blinking

Mine did that one time and I reinstalled the firmware - it has not happened again in 3 years of nearly daily use...
by stewdio
Mon Jan 01, 2018 3:07 pm
Forum: Moogerfooger Forum
Topic: Replacement feet
Replies: 5
Views: 1819

Replacement feet

Anyone know where to get the correct rubber feet to replace a set I'm missing on one of my Moogerfoogers? It was briefly mounted to a pedalboard and the feet got lost :x

thanks & HNY!
by stewdio
Fri Dec 22, 2017 2:37 pm
Forum: Grandmother, Mother-32 & DFAM
Topic: Pitch bend range
Replies: 0
Views: 470

Pitch bend range

I found the details for changing the pitch bend range in the manual but I'm not sure I understand them - I assume someone here must have done this? Looks like I just go into a DAW and then send three sequential MIDI messages with the controllers and values as described in the manual? Does this chang...
by stewdio
Fri Dec 22, 2017 2:23 pm
Forum: Sub 37, Subsequent 37, Sub Phatty Forum
Topic: Mod wheel and pitch bend MIDI out
Replies: 2
Views: 476

Re: Mod wheel and pitch bend MIDI out

My MIDI definition, the pitchbend wheel and alls other controllers are NOT scaled by the sending MIDI unit. You have to select a matching pitchbend range on the receiving instrument. I don't know if and how you can set this on a M32. (The reason for this is standards is, to get the best possible zi...
by stewdio
Thu Dec 21, 2017 2:56 pm
Forum: Sub 37, Subsequent 37, Sub Phatty Forum
Topic: Sub Phatty Pitch Incorrect Out-Of-Box
Replies: 2
Views: 571

Re: Sub Phatty Pitch Incorrect Out-Of-Box

Have you done a pot and controller calibration with SysEx data? Or just the note calibration procedure that's in the manual? I had to do a full pot and controller calibration on my 37 (I assume such a thing exists for the Phatty) when I had a similar problem 2 yrs ago and it's worked 100% since then...
by stewdio
Thu Dec 21, 2017 2:24 pm
Forum: Sub 37, Subsequent 37, Sub Phatty Forum
Topic: Mod wheel and pitch bend MIDI out
Replies: 2
Views: 476

Mod wheel and pitch bend MIDI out

Hi all - I'm starting to use my M32 with my Sub37 and I can't figure out how to get the pitch and mod wheel to work over MIDI the way I would like them to... The two problems I'm having are the pitch bend range is +/- one octave over MIDI, but I'd really like to have it +/- two semis (which is how I...
by stewdio
Tue Nov 07, 2017 5:05 pm
Forum: Sub 37, Subsequent 37, Sub Phatty Forum
Topic: Sub 37 upgrade legit or troll?
Replies: 52
Views: 10115

Re: Sub 37 upgrade legit or troll?

The contrl board has nothig to do with the bigger headroom of the mixer section. It is solved on the analog board which is also changed. In my opinion the change of control board is only because headphone amp. ah - I didn't realize that there was another board in there - I thought everything apart ...