Moog Music Forum

sounds pretty normal to me..
but why the DI box? no line-in on the audio interface?

also check your midi 'echoing' from daw or other hardware..
It could cause these kinds of strange things to happen..

ok.. seems i have the same issues..
I did calibrate a few times (properly!) but it didn't solve the problem.

But before I send it away for repairs, did the replacement did the trick for anyone?

(to answer the last post: contact support, they will send you the calibration sysex's)

not sure if I get your problem..
but if you have the editor software you can set 'load preset volume' to OFF.

for the rest it is a balancing act between the main volume, mixer section for the oscillators and the multidrive mostly...

Hope that helps..

not shure about the continuous clock output of the sub37, but I would not have the Sub37 as my master clock. Somehow it feels more natural to have your drum computer as the master clock. However, is it a feasible option to mute the TR-8, or as the post before mentioned switch to blank preset? That s...

If you turn of 'latch' in the arpeggiator section it should not be playing..
At least it does not with my setup (connected to Tempest with midi din plug)

Daan

Is there any info on when 1.1 is available for us?

(can't wait to play with the new features!! )

I did not notice anything like this,
But is there anything against using a MIDI cable to ensure the sync?
You can easily sync and then un-sync with the sequencer and let it drift..

I would like to beta test!

(running Mac OS 10.10.1 w. Bitwig)

Thanks,
Daan

no, no midi on the Mf-delay. However, it's easier then you would think to find that sweet spot. And better still; most slightly off beat repeats are the funkiest! You will never find those with a sync'd delay..

minifooger MF delay! sounds just like the 104 and a fraction of the cost!

I had the same problem with mine.. In the end a new pot had to be installed. I had to live without mine for a few weeks..
Luckily it was al under warranty.

where can I find the latest version of the 'Mac' Sub phatty editor?
**edit** I have 1.1.0 is that the most recent one?

they are completely two separate things.. If you would have an IconnectMIDI-2 or something similar you can use the midi out from the SubP. to trigger Animoog (or vice-versa) Then if you would have a (analog) mixer you could send the mix of those two to the input of your DAW. However, this seems over...

check this:

http://forum.moogmusic.com/viewtopic.ph ... ic#p124343