Search found 50 matches
- Thu Mar 25, 2021 8:48 am
- Forum: Moogerfooger Forum
- Topic: CP-251 maximum voltage output?
- Replies: 8
- Views: 31846
Re: CP-251 maximum voltage output?
Hello! I am wondering if I could use the CP 251 mixer to boost 10V Gate signals from a sequencer CV Out to 10+5=15V I would do that to trigger S/H Gate on ARP 2600. I must admit so far the documentation and posts above are not clear wrt the Offset in the mixer. If that offset can add + 5V, then the ...
- Tue Jan 19, 2021 9:17 am
- Forum: Moog One
- Topic: Next 1.5 update, when ?
- Replies: 53
- Views: 138297
Re: Next 1.5 update, when ?
You are right. I hope they address some of the long remain issues or puzzling behaviors. —> I might take this opportunity to re-assess my personal list of issues and expected enhancements... Since there is no feedback on what we post here, I think it’s legit to post again and again, even if it feels...
- Wed Jan 06, 2021 3:34 pm
- Forum: Moog One
- Topic: Moog One Manual Problems
- Replies: 9
- Views: 10281
Re: Moog One Manual Problems
Hi devnull! I haven’t read all your post but as I went through it quickly I saw a point with which I disagree: you say that output settings are not saved with presets. This is only valid for master volume and headphones volume. The output matrix is saved with each preset. Typically I use it for my o...
- Mon Jan 04, 2021 2:55 pm
- Forum: Moog One
- Topic: How to set sequencer Gate time for Step Mod?
- Replies: 2
- Views: 2929
Re: How to set sequencer Gate time for Step Mod?
FYI my only bypass so far is to double the number of modulation steps to introduce “0” steps in between. But that is definitely just a poor bypass versus having the ability to adjust each steps modulation gate time. And I have to double the master clock frequency. For example, instead of having the ...
- Mon Jan 04, 2021 2:36 pm
- Forum: Moog One
- Topic: How to set sequencer Gate time for Step Mod?
- Replies: 2
- Views: 2929
How to set sequencer Gate time for Step Mod?
Hi! I’ve been starting to use the sequencer for advanced modulations, but I miss the ability to setup the Gate time for each step, as for the notes. For exemple, I play (manually, not using the sequencer) a lush pad with ladder filter almost closed, and over it I would like to apply a 6 steps long s...
- Fri Oct 16, 2020 1:26 pm
- Forum: Moog One
- Topic: Moog One FEATURE Requests
- Replies: 243
- Views: 622490
Re: Moog One FEATURE Requests
Hi Synthguy! Adding some EG on top of the envelope itself (if that is what you had in mind: but maybe you are describing something else?) is different from what I expect and from my experience with the Andromeda. I had actually already tried that to “square” some exponential attacks and such things....
- Tue Oct 13, 2020 4:34 am
- Forum: Moog One
- Topic: Moog One FEATURE Requests
- Replies: 243
- Views: 622490
Re: Moog One FEATURE Requests
Another feature that would greatly help would be to have “S” curve shapes on the envelope, next to log, linear and exponential.
I used it extensively on the Andromeda.
Especially for Decay: it brings a smoother “landing” at the end of a Log curve typically.
Cheers!
I used it extensively on the Andromeda.
Especially for Decay: it brings a smoother “landing” at the end of a Log curve typically.
Cheers!
- Mon Oct 05, 2020 2:03 am
- Forum: Moog One
- Topic: Moog One FEATURE Requests
- Replies: 243
- Views: 622490
Re: Moog One FEATURE Requests
Following a discussion on Gearslutz I realize my request is still not well formulated. The idea is not to mute one of the 3 Synths but to turn off its “keyboard control”, so that, if that synth is in Latch mode or on a long sustain patch, it remains impervious to new notes the same hand would do whe...
- Fri Oct 02, 2020 5:35 pm
- Forum: Moog One
- Topic: Moog One FEATURE Requests
- Replies: 243
- Views: 622490
Re: Moog One FEATURE Requests
Maybe I wasn’t precise enough in my previous post: when I say the ON/OFF of SYNTH1, SYNTH2 and SYNTH3 I mean the “KEYBOARD CONTROL” ON/OFF for each of the 3 synths
Cheers!
Cheers!
- Fri Oct 02, 2020 3:22 am
- Forum: Moog One
- Topic: Moog One FEATURE Requests
- Replies: 243
- Views: 622490
Re: Moog One FEATURE Requests
Hi! One improvement I would love (and have been dreaming since the start) would be to have the ability to switch ON/OFF the SYNTH1, SYNTH2 and SYNTH3 via midi. Ideally via a midi foot pedal. That would be totally unique and would allow uninterrupted left hand playing while one of the 2 superimposed ...
- Wed Feb 12, 2020 5:11 pm
- Forum: Moog One
- Topic: Moog One Bugs
- Replies: 98
- Views: 298787
Re: Moog One Bugs
Remaining issues with FX As much as I have no more issues with Gain levels between Synth FX and Master FX, there is still a problem regarding the SEND amount on the reverb. —> If I have a Synth FX on (say a Stereo Chorus) and that I have a Stereo reverb after, I can really hear the reverb even if it...
- Wed Feb 12, 2020 2:21 pm
- Forum: Moog One
- Topic: Moog One FEATURE Requests
- Replies: 243
- Views: 622490
Re: Moog One FEATURE Requests
That is an early request that totally makes sense on the One and would open great possibilities with the sequencer for example
Besides, there are also little additional modulations that I would love: for example having PAN SPREAD as a modulation destination.
Cheers
Besides, there are also little additional modulations that I would love: for example having PAN SPREAD as a modulation destination.
Cheers
- Sun Feb 02, 2020 4:42 pm
- Forum: Moog One
- Topic: Patch with flanger - snapshots recall not correctly
- Replies: 4
- Views: 3566
Re: Patch with flanger - snapshots recall not correctly
In 1.2.1 I clearly experienced an issue calling back a STEREO CHORUS preset.
The value of Left Time was recalled with more than 30 seconds although I had not changed the default value which was something like 7 seconds.
So yes, some values related to time are definitely altered.
The value of Left Time was recalled with more than 30 seconds although I had not changed the default value which was something like 7 seconds.
So yes, some values related to time are definitely altered.
- Fri Jan 31, 2020 3:40 pm
- Forum: Moog One
- Topic: Gain staging between Synth FX and Master FX
- Replies: 9
- Views: 6689
Re: Gain staging between Synth FX and Master FX
After my short tests I found I had no more level issues between Synth FX and Master FX since I updated to 1.2.1
- Thu Jan 16, 2020 7:03 pm
- Forum: Moog One
- Topic: Moog One Bugs
- Replies: 98
- Views: 298787
Re: Moog One Bugs
I have the same issue with the V1.2 stereo chorus. I get a high feedback (higher than what I had saved) when I recall my preset.
Cheers
Cheers