Search found 15 matches

by ClintAu
Sat Sep 07, 2019 8:22 am
Forum: Moogerfooger Forum
Topic: Vertical and shallow rack
Replies: 2
Views: 99

Re: Vertical and shallow rack

Thanks! Good tip about the centre of mass. I was figuring I'd have to have weights at the base and/or a wire anchor to the wall.

...and nice Moogy setup you have :)
by ClintAu
Wed Sep 04, 2019 6:27 am
Forum: Moogerfooger Forum
Topic: Vertical and shallow rack
Replies: 2
Views: 99

Vertical and shallow rack

I've got a few rows of Moogerfoogers mounted in Moog's rack thing. I'd like to mount them vertically and to use as little horizontal space as possible. Most music rack equipment is quite deep, wasting floor space. I found 19" server racks, like this: https://www.racksolutions.eu/relay-racks.html or ...
by ClintAu
Thu Feb 21, 2019 12:29 pm
Forum: Moog Music General Topics Forum
Topic: New Minitaur form-factor synth
Replies: 8
Views: 2260

Re: New Minitaur form-factor synth

Still though, a little more ambition would have been nice. A desktop, scaled down version of the Sub37 for example. The integration of analog and digital VST control is great with both the Sub37 and Minitaur. It's a clear differentiator from the flood of cheap analog monos with limited or no digital...
by ClintAu
Thu Jul 19, 2018 1:25 pm
Forum: Moogerfooger Forum
Topic: Y cable to split CV?
Replies: 4
Views: 1335

Re: Y cable to split CV?

Agreed, rather inelegant :)
by ClintAu
Wed Jul 11, 2018 4:33 am
Forum: Moogerfooger Forum
Topic: Y cable to split CV?
Replies: 4
Views: 1335

Re: Y cable to split CV?

Thanks! I haven't found an elegant solution for that. I suppose this should work then:

https://www.amazon.co.uk/6-35mm-Mono-2- ... B005JKY43K
by ClintAu
Sun Jul 08, 2018 1:44 pm
Forum: Moogerfooger Forum
Topic: Y cable to split CV?
Replies: 4
Views: 1335

Y cable to split CV?

I was wondering whether it's OK to use a Y-cable such as... m ...to split a CV signal with the Moogerfoogers? Eg, to split an LFO from the CP-251 out to two Moogerfooger inputs. I know it's preferable to use the CP-251 mult section, but I don't want to tie it up for this case. I suppose there's a pr...
by ClintAu
Thu Jul 14, 2016 7:28 am
Forum: Moog Music General Topics Forum
Topic: New Minitaur form-factor synth
Replies: 8
Views: 2260

New Minitaur form-factor synth

While the Mother-32 is fine and well, I would really appreciate something in the Minitaur form factor but not bass specific. I.e, the Slim or Sub Phatty engine but in a highly-compact desktop format. A bit knobby and with a really good VST editor for finer control. Of course it would be a comprise i...
by ClintAu
Thu Nov 26, 2015 3:15 pm
Forum: Moogerfooger Forum
Topic: CP-251/Mother-32
Replies: 0
Views: 694

CP-251/Mother-32

I was just thinking it would be lovely if Moog released a modernised CP-251, perhaps with some shared guts of the Mother 32, but with jack cables for connection to Moogerfoogers. A compact box with MIDI/USB, some more LFOs, CV sequencer...
by ClintAu
Mon Feb 10, 2014 3:45 pm
Forum: Moogerfooger Forum
Topic: Stereo MF-101
Replies: 7
Views: 1132

Re: Stereo MF-101

EMwhite: I actually *don't* want L/R differentiated. I want to have a stereo Moog filter, basically.

Thanks guys for the ideas. I have a CP-251, but was hoping for a simple Fooger-Fooger solution that can be plugged in all the time and not waste patching space.
by ClintAu
Sat Feb 08, 2014 12:27 pm
Forum: Moogerfooger Forum
Topic: Stereo MF-101
Replies: 7
Views: 1132

Stereo MF-101

Is it possible to use two MF-101s in parallel, with some kind of synchronisation of knobs via CV? Eg, if I move the filter cutoff of the primary MF-101, it changes the other. Does this work ok in practice or do the left/right channels phase?
by ClintAu
Wed Mar 21, 2012 1:38 pm
Forum: Little Phatty & Slim Phatty Forum
Topic: Dropped and stuck notes even with new firmware
Replies: 114
Views: 10789

Re: Dropped and stuck notes even with new firmware

I can't seem to update my SP with this USB firmware fix. After I select the number for my Slim Phatty in firmware installer app, nothing much happens. Sometimes I the SP's LEDs will change, sometimes the whole SP will freeze up, but no firmware update. Are there any further troubleshooting steps for...
by ClintAu
Sat Jun 18, 2011 1:27 pm
Forum: Moogerfooger Forum
Topic: Multi-Moogerfooger power supply
Replies: 57
Views: 29734

Re: Multi-Moogerfooger power supply

Thanks for the tips, everyone - I'll check out some of these third-party power supplies.
by ClintAu
Sat Jun 18, 2011 1:25 pm
Forum: Little Phatty & Slim Phatty Forum
Topic: Max for Live patch for controlling Phatty
Replies: 14
Views: 3799

Re: Max for Live patch for controlling Phatty

Hi, I just want to thank acatcalledanarchy for his really great patch, it works really well!
by ClintAu
Thu Jun 16, 2011 5:05 am
Forum: Moogerfooger Forum
Topic: Multi-Moogerfooger power supply
Replies: 57
Views: 29734

Multi-Moogerfooger power supply

It would be great if there was a power supply that could power multiple Moogerfoogers. It's kind of ridiculous to cart around a whole bunch of wall-warts.

I'm not sure from an electrical engineering perspective where it is possible or wise, but sure would be handy!