Search found 184 matches

by Acid Mitch
Sun Feb 18, 2024 4:40 pm
Forum: Minimoog Forum
Topic: Voyager Fine Tune
Replies: 3
Views: 119825

Re: Voyager Fine Tune

Does the display show values changing when you turn the fine tune knob ?
Do you have osc sync set to "off" on the front panel ?
by Acid Mitch
Mon Jan 29, 2024 9:38 am
Forum: Minimoog Forum
Topic: Voyager & MoogerFooger Signal Path?
Replies: 1
Views: 554

Re: Voyager & MoogerFooger Signal Path?

"Best" depends on what you are trying to achieve. You will get different results connecting things in different ways. For some sounds you will have some moogerfoogfers connected to the Voyagers insert jack. For some sounds you will have the Moogerfoogers connected to the main outputs. For ...
by Acid Mitch
Wed Nov 15, 2023 1:08 pm
Forum: Minimoog Forum
Topic: Using the EXT AUDIO IN to run softsynths through the moog filter
Replies: 5
Views: 11958

Re: Using the EXT AUDIO IN to run softsynths through the moog filter

This would work, but only for monophonic played (= one note at a time) VST instruments. You can get some nice sounds putting chords through it. Sometimes paraphony can sound great. It's also pretty easy to multitrack one note at a time to build chords. It's worth spending half an hour trying things...
by Acid Mitch
Wed Nov 15, 2023 1:04 pm
Forum: Minimoog Forum
Topic: What is your favorite Minimoog softsynth?
Replies: 3
Views: 4018

Re: What is your favorite Minimoog softsynth?

There's also the Softube one and Diva. Diva gets you other sounds as well.
Best to try a few demos and pic the one you like using the most.
by Acid Mitch
Wed Nov 15, 2023 10:22 am
Forum: Minimoog Forum
Topic: Panelsettings and sound om my Minimoog Voyager change spontaneously
Replies: 5
Views: 5435

Re: Panelsettings and sound om my Minimoog Voyager change spontaneously

I had this exact same problem. I sent the Voyager to Source distribution who are official Moog UK service centre. It took many months to diagnose and fix. Mainly because the fault was intermittent and could take days or weeks to show up. Firstly they replaced the power regulator and reflowed the sol...
by Acid Mitch
Wed Nov 15, 2023 7:36 am
Forum: Moog Music General Topics Forum
Topic: How to record etherwave theremin to logic
Replies: 3
Views: 3452

Re: How to record etherwave theremin to logic

On your audio interface make sure the inputs are set to line level and not mic or instrument.
by Acid Mitch
Sat Jul 08, 2023 11:40 am
Forum: Minimoog Forum
Topic: Moog Voyager Oscillator Octave Issues
Replies: 4
Views: 4106

Re: Moog Voyager Oscillator Octave Issues

I had a similar issue with my Voyager RME. It turned out to be the psu. The psu still wasn’t working correctly after having some parts replaced and all soldering redone so it got completely replaced with a new one. Took Moog repair centre several months to diagnose and fix..
by Acid Mitch
Sat May 14, 2022 8:06 am
Forum: Moog Music General Topics Forum
Topic: Sequencer for Moog Voyager
Replies: 8
Views: 3739

Re: Sequencer for Moog Voyager

If you have the cash Cirklon is good.
Also check out the Squarp Pyramid.
by Acid Mitch
Tue May 03, 2022 7:44 am
Forum: Minimoog Forum
Topic: Minimoog Voyager RME Filter Frequency, Resonance, and Oscillator octave issues
Replies: 3
Views: 2319

Re: Minimoog Voyager RME Filter Frequency, Resonance, and Oscillator octave issues

The RME may not have an X,Y pad built in but it certainly has the settings Rudi describes for X,Y pad. Inputs/outputs for the pad are on the CV expanders (VX351 and VX352). This is so that you can control the RME from another Voyager or CV source of your choice.
by Acid Mitch
Thu Apr 28, 2022 8:02 am
Forum: Moog Music General Topics Forum
Topic: Sequencer for Moog Voyager
Replies: 8
Views: 3739

Re: Sequencer for Moog Voyager

Yes.
Here's a video of how to connect the SQ1. https://www.youtube.com/watch?v=YyiFyqj09FQ
With SQ64 you can use CV/ gate or MIDI to sequence the Voyager.
Mono Machine and most other Elektron gear can sequence external instruments using MIDI.
by Acid Mitch
Tue Apr 26, 2022 8:11 am
Forum: Moogerfooger Forum
Topic: Is it possible to get MF-104M synced repeats for eternity?
Replies: 6
Views: 21272

Re: Is it possible to get MF-104M synced repeats for eternity?

andybutler wrote: Fri Apr 23, 2021 5:17 am Depends on your DAW.
If it's Ableton then no chance.
"Rock solid midi" is a thing, but it just means "not like Ableton".
With Ableton there is every chance if you use Expert Sleepers devices instead of standard MIDI interfaces
by Acid Mitch
Tue Apr 26, 2022 8:02 am
Forum: Minimoog Forum
Topic: Voyager Pot Mapping & MIDI
Replies: 1
Views: 15356

Re: Voyager Pot Mapping & MIDI

If the pot mapping amount is set to something other than zero then velocity should be having an effect.
by Acid Mitch
Tue Apr 26, 2022 8:00 am
Forum: Moog Music General Topics Forum
Topic: Vintage, Voyager or Virtual - a comparison test
Replies: 28
Views: 35835

Re: Vintage, Voyager or Virtual - a comparison test

My advice would be "use your ears" because the knob positions won't line up.
Sometimes using visualisation helps, like oscilloscope, frequency analyser or recording into your daw or audio editor and comparing waveforms.
by Acid Mitch
Sun Apr 24, 2022 8:09 am
Forum: Taurus, Minitaur & Sirin
Topic: Editor for Minitaur and Sirin on iPad or tablets
Replies: 5
Views: 18675

Re: Editor for Minitaur and Sirin on iPad or tablets

You get the Minituar template for Lemur from the Lemur website. To use it open it in Lemur, set you're MIDI connections and then touch the controls on screen.
by Acid Mitch
Sun Apr 24, 2022 8:03 am
Forum: Minimoog Forum
Topic: Voyager OS 3.5 / Sysex Librarian and loading banks
Replies: 2
Views: 1777

Re: Voyager OS 3.5 / Sysex Librarian and loading banks

Do you have a different MIDI interface to try with ?