Moog Music Forum

Thank you!!

Best,
psound74

Hi all, Am considering a Matriarch; looking at the manual, i am not seeing what MIDI messages can be received sent (notes, CCs, etc) as there is no MIDI Implementation chart (columns for transmitted/received, columns for notes, poly & channel after touch, continuous controllers, clock, etc.) Is ...

Thanks for the calibration info! New out of box (s/n 13584) VCO 2 tuning and VCF amount knobs were so out of whack I thought i had a dud...fixed!

Just posted a new tune; three instruments: 1975 Rhodes Mk 1 88, Warwick Corvette 4 string fretless and Minimoog Model D.

A tribute to a friend's mother's passing.

http://www.psound74.com/vera.mp3

Respectfully,
Patrick (psound74)

What's the "Robot" non-moog thing?

psound74

Question: if you patch ch 1 (lfo tri or square) of an MP-201 into the audio in of an mf-102 and ch 2 (expression mode) into the carrier in of the '102, can you use the '201 pedal to (quad mono) change lfo speed on ch 1, and ten switch to ch 2 to adjust "lfo amount"? Or would you need a ded...

Emailed! Thanks, Amos!

I may be talking out of turn since my experience is based on the Model D, but is there an adjustment pot for the VCA on the Prodigy? (On the Mini there are actually TWO VCAs, if you get thumping, there is an adjustment pot for one of them to rebalance; it's in the service manual, so it seems like it...

I tried USB first, and neither my Mac (in Audio MIDI Setup & SysEx Utility) nor the PC (Device Manager, Sound Control Panel, PD or Cakewalk) saw that the MP-201 was even plugged in. I tried the steps as described anyway, but the MP-201 didn't even blink! I had been a victim of the "all-whit...

Hey everybody (Amos, hope you're in here),

tried from my mac & pc to update my v1.01 MP-201 to v2 firmware w/ USB & regular MIDI.

How do I ship it to Moog/get an RA #?

Thanks,
psound74

These jacks can be used if you get .206" jacks (Switchcraft 260)...I got mine from Mouser and terminated the other end in a 1/4" female plug so I could plug in a cable of varying lengths (depending on gig/house location) to the Boss F5-SU footswitch. From the minimoog manual... ===========...

gates send settable voltages (not just 0 or +5)

psound74

Bump to this MP-201 Crashes :-/ topic...it's been awhile; Amos (or any other Moog folk) - any ETA on this release???

Thanks,
Patrick (psound74)

Hi All, After the (MOST unfortunate) failure of the USB MIDI on my MP-201, I figured that while I was waiting for the new version of firmware to come out, I'd use the MIDI DIN sockets. As I only have a 1-in/1-out MIDI interface (M-Audio UNO), my patch is: MP-201 DIN OUT -> Voyager IN/(MIDI Merge)/Vo...

Me three.

(...excepting Alice.)