Search found 1235 matches

by till
Thu Jul 22, 2021 2:46 am
Forum: Moog One
Topic: looking for someone in the US for buying a special Moog feature
Replies: 3
Views: 80

Re: looking for someone in the US for buying a special Moog feature

I would love to add it to my Moog One too. I am also from Germany.
by till
Thu Jul 01, 2021 10:34 am
Forum: Minimoog Forum
Topic: Voyager Editor
Replies: 1
Views: 82

Re: Voyager Editor

Congratulation to your Moog Voyager! The 7 banks of 128 patches (= 896 patch memory slots) was a hardware thing for older Voyagers. You need a firmware version of 3.0 or above to use it. From the time on the hardware and firmware update was released, all new produced Voyagers had the new digital boa...
by till
Sat Jun 19, 2021 2:32 pm
Forum: Minimoog Forum
Topic: Voyager aftertouch sensitivity, for MIDI?
Replies: 2
Views: 128

Re: Voyager aftertouch sensitivity, for MIDI?

The hardware update (I bought it) changed the way the analog aftertouch signal of the keybed is transformed into the needed digital data. It changed the onboard aftertouch as well as the data send. Before this upgrade, the aftertouch was really awful. It was either a bit aftertouch modulation or nea...
by till
Thu May 27, 2021 4:18 am
Forum: Moog Music General Topics Forum
Topic: New Moog Factory Tour Video
Replies: 5
Views: 280

Re: New Moog Factory Tour Video

Thanks for this inside the factory video. I enjoyed it in full length.

I would have liked to to see more details steps of the Moog One assembling.
by till
Sat May 22, 2021 1:07 pm
Forum: Moog Music General Topics Forum
Topic: Moog Prodigy
Replies: 1
Views: 119

Re: Moog Prodigy

Can you hear the filter self oscillating with full resonance if the cutoff is in the audible range? Set the Amount of Contour to zero. And the VCA Envelope to short attack and full sustain. If this is working, try to use the full keyboard tracking of the filter. Does the filter track more or less as...
by till
Sat May 22, 2021 3:18 am
Forum: Minimoog Forum
Topic: External Audio Input through Vintage Model D?
Replies: 2
Views: 126

Re: External Audio Input through Vintage Model D?

The external audio input is available on the vintage Minimoogs too.

But the LFO is only able to modulate the filter cutoff of the external audio. Of cause not the pitch. And these is no onboard way to use the LFO for other modulations such as volume.
by till
Wed May 05, 2021 5:40 am
Forum: Minimoog Forum
Topic: minimoog model D plays just one note
Replies: 2
Views: 301

Re: minimoog model D plays just one note

But the OSC CONTROL is just switching keyboard tracking of the third oscillator on or off. The other two oscillators should not change by this switch. I got a vintage and a reissue Minimoog here.

If it does change the first two oscillators, there is something strange happening.
by till
Fri Apr 30, 2021 4:24 am
Forum: Taurus, Minitaur & Sirin
Topic: Taurus 2 controller not sending note
Replies: 6
Views: 319

Re: Taurus 2 controller not sending note

Did you check that each of the 5 pins of the cable are getting through to the other side pins? And did you also check they are on the very same pin number? There used to be cables with cross-over wiring. And Ground is connected to both ends? If the cable is for 100% sure OK, you need a technician to...
by till
Sun Apr 25, 2021 12:33 pm
Forum: Taurus, Minitaur & Sirin
Topic: Taurus 2 controller not sending note
Replies: 6
Views: 319

Re: Taurus 2 controller not sending note

As the Taurus 2 is not a MIDI Instrument, It might need more than a standard MIDI cable. A MIDI cable only got three of the five pins connected. And if I read the schematics I found online right, there are five connections needed. So find a cable wit the needed DIN connectors and all pins wired to a...
by till
Thu Apr 22, 2021 5:11 am
Forum: Little Phatty & Slim Phatty Forum
Topic: Can the Sub Phatty tempo sync filter and amp envelope repeats?
Replies: 1
Views: 166

Re: Can the Sub Phatty tempo sync filter and amp envelope repeats?

This is not possible. And I don‘t think there will be an update for the Sub Phatty anymore. But it might be possible technically by the firmware.
by till
Mon Apr 12, 2021 2:27 am
Forum: Minimoog Forum
Topic: Some presets return no sound at all
Replies: 1
Views: 199

Re: Some presets return no sound at all

Some questions and tests: Do you use the Voyager keybed for playing? If yes, undo all MIDI cables and test again. If you use a external keyboard, disconnect the MIDI Output of the Voyager for some testing. If you tested it via the keybed, try using a MIDI source. And if you use a external keybed, us...
by till
Sat Mar 27, 2021 9:36 am
Forum: Minimoog Forum
Topic: Minimoog and midi - just giving a steady sound.
Replies: 1
Views: 188

Re: Minimoog and midi - just giving a steady sound.

What Minimoog are we talking about? Vintage or Reissue? You use the S-Trigger socket of the vintage one? You got the right jack for it (2-pin Cinch/Jones connector)? It isn't a ¼" one! The reissue Minimoog uses a ¼" trigger input and works with V-Trigger. Have you checked the outgoing sign...
by till
Tue Mar 23, 2021 5:21 pm
Forum: Minimoog Forum
Topic: minimoog model d’s S-trigger with keystep
Replies: 2
Views: 242

Re: minimoog model d’s S-trigger with keystep

Is the Keystep able to send S-Trigger (actually a gate to ground)?
Most synths use a voltage trigger. And most analog interfacing of todays sequencers don‘t offer the needed S-Trigger.
There are converter available. It takes just two resistors and a transistor to do a converter.
by till
Thu Mar 11, 2021 5:44 pm
Forum: Moog One
Topic: Next 1.5 update, when ?
Replies: 11
Views: 2090

Re: Next 1.5 update, when ?

Moog never fixed all bugs on the Taurus 3 because they said, that they will finish the Version 1 of some new synths first.
Same happened to the MP-201.
I would not bet on a version 1.5 being released. And for sure not hold my breath till then.
by till
Wed Mar 10, 2021 10:49 am
Forum: Minimoog Forum
Topic: Controlling and sequencing af Minimoog Model D
Replies: 2
Views: 275

Re: Controlling and sequencing af Minimoog Model D

And obviously, you can't remote control parameters or recall patches via MIDI :wink: