I dislike the Cinch plugs. And I am very happy, that SynthWerk switched, although rather authentic, to normal ¼" sockets.
But changing this on a vintage Modular is like putting LED lights on a vintage Ford Model T car.
Search found 1364 matches
- Thu May 09, 2024 5:43 am
- Forum: Modular Forum
- Topic: S-trigger
- Replies: 2
- Views: 146
- Fri May 03, 2024 9:37 am
- Forum: Minimoog Forum
- Topic: new voyager user
- Replies: 6
- Views: 892
Re: new voyager user
Although not perfect, I would not calibrate it, unless you dislike all stored factory presets being detuned.Stergios T. wrote: ↑Wed May 01, 2024 12:11 pm i meant the values on the display.
do you find that it is necessary to give it to a technician?Do you think that that all the problems i described are a bit normal?
- Sat Apr 27, 2024 4:15 am
- Forum: Minimoog Forum
- Topic: new voyager user
- Replies: 6
- Views: 892
Re: new voyager user
... -osc 3 seems that it is not in tune with osc1 and 2 ....(it must be set about +2/3 with the freqiency knob to be in the same tuning as the other 2 oscs.) ... Welcome and gratulation! Do you mean by "+2/3" the value shown on the display or the marking of the pot on the panel? You need ...
- Tue Apr 23, 2024 5:10 am
- Forum: Minimoog Forum
- Topic: Minimoog Model D 2022 Reissue, Oscillator 2/3 semitone accuracy
- Replies: 1
- Views: 455
Re: Minimoog Model D 2022 Reissue, Oscillator 2/3 semitone accuracy
I own two reissues and a 1979 version. The markings are not accurate on all three.
- Thu Mar 28, 2024 12:00 pm
- Forum: Moog Music General Topics Forum
- Topic: MemoryMoog latest firmware for non-plus
- Replies: 13
- Views: 9743
Re: MemoryMoog latest firmware for non-plus
Rudi Linhard?analogmonster wrote: ↑Wed Mar 27, 2024 3:30 am Does anybody know whether the firmware assembler sources exist and if so who has them?
- Wed Mar 27, 2024 2:02 am
- Forum: Minimoog Forum
- Topic: Reissue Model D Midi issue
- Replies: 8
- Views: 8154
Re: Reissue Model D Midi issue
Why should there be incorrect MIDI note-off messages?jsharpphoto wrote: ↑Thu Jun 25, 2020 12:17 am It also sometimes retriggers the note when I left my finger off the key. I think incorrect note-off messages might be causing these issues.
I would check for a MIDI loop.
- Mon Mar 25, 2024 7:21 am
- Forum: Taurus, Minitaur & Sirin
- Topic: Minitaur Audio In
- Replies: 7
- Views: 1140
Re: Minitaur Audio In
You need to play a not to hear something from the Minitaur.
- Fri Mar 22, 2024 11:19 am
- Forum: Moog Music General Topics Forum
- Topic: Multimoog Ground Loop Tuning Issue
- Replies: 2
- Views: 1129
Re: Multimoog Ground Loop Tuning Issue
Ground loops create an audible buzz at 60 or 50 Hz (depends on mains system). I never ever heard about this causing a bad tuning on analog synths. For a steady pitch, you need to have a well defined constant voltage at the VCO. And so my guess is a faulty PSU of your Moog or a massive voltage fluctu...
- Fri Mar 22, 2024 11:08 am
- Forum: Minimoog Forum
- Topic: (2024) Minimoog voyager hangs at bob screen
- Replies: 9
- Views: 2703
Re: (2024) Minimoog voyager hangs at bob screen
That was my guess.
It is like this in the english Wikipedia version. But not in the german or french version.
I remember these times very well, and I do trust my memory more than a single Wikipedia text.
- Wed Mar 13, 2024 4:14 pm
- Forum: Minimoog Forum
- Topic: (2024) Minimoog voyager hangs at bob screen
- Replies: 9
- Views: 2703
Re: (2024) Minimoog voyager hangs at bob screen
… In 1997 the Electric Blue was released in limited quantities 5 years beforeThe voyager was released in 2002. … Do you have a reliable source for the 1997 Electric Blue? I am only aware of a 2004 version of that name. The „1997“ given at the english Wikipedia is without a reference. And I did not ...
- Mon Mar 04, 2024 7:15 am
- Forum: Taurus, Minitaur & Sirin
- Topic: Taurus 3 sustain note?
- Replies: 2
- Views: 787
Re: Taurus 3 sustain note?
Which firmware version is used?
And you don't have MIDI or USB MIDI connected, right?
And you don't have MIDI or USB MIDI connected, right?
- Tue Feb 13, 2024 9:51 am
- Forum: Minimoog Forum
- Topic: Model D Saw Ramp Up on Oscilloscope Weirdness
- Replies: 8
- Views: 11341
Re: Model D Saw Ramp Up on Oscilloscope Weirdness
... Faulty Oscillator Circuit: There could be a problem with the circuitry generating the sawtooth waveform in one or more oscillators. This could be due to aged components or other issues. Incorrect Calibration: The Mini Moog D can be calibrated, and your sawtooth waveforms might be out of calibra...
- Thu Feb 08, 2024 1:58 pm
- Forum: Moog One
- Topic: Moog One Firmware Upgrade.
- Replies: 14
- Views: 201054
Re: Moog One Firmware Upgrade.
A post yesterday in the Moog One Users Group on Facebook said: “One last final OS upgrade is due soon” We heard this for over an year now, just after some 1.5 bugs where discovered. Which source on Facebook? An official claim by Moog or by someone else? And I sent them mails about the key range not...
- Sat Jan 20, 2024 8:23 am
- Forum: Moog Music General Topics Forum
- Topic: AI generated post invsasion
- Replies: 7
- Views: 3985
Re: AI generated post invsasion
If these invasion of AI postings will keep on, I will quit using this forum for sure.. It used to be such a helpful forum some years ago. Ideas were exchanged and people got help. There were some stupid newbies question, but they got answers anyway. But today we see so man first posting with posting...
- Wed Jan 03, 2024 1:04 pm
- Forum: Subsequent 37 & Subsequent 25
- Topic: Octave Control Issue with Sub37's OSC 1 Knob
- Replies: 3
- Views: 2621
Re: Octave Control Issue with Sub37's OSC 1 Knob
There are reliability issues with the SubPhatty rotary switches. I had to exchange them on my SubPhatty, when two became unusable. Maybe the very same part is used on the Sub37?