Search found 42 matches

by electrojoe
Mon Jan 03, 2022 9:23 am
Forum: Taurus, Minitaur & Sirin
Topic: MIDI Foot Pedals and Juno DS-61 w/ Minitaur
Replies: 2
Views: 14879

Re: MIDI Foot Pedals and Juno DS-61 w/ Minitaur

Hello,
I believe you would be able to put everything to the same midi Channel and then just use the volume on each unit to control which one you hear while playing.

Midi cable from Controller to DS61 to Minitaur.

Hope that helps.
GD
by electrojoe
Sat Oct 02, 2021 6:32 am
Forum: Taurus, Minitaur & Sirin
Topic: Taurus 1 decay problems
Replies: 1
Views: 7510

Re: Taurus 1 decay problems

Sounds like you have contamination (flux) around the sample and hold circuit for the keyboard. Or you have a defective part in the sample and hold circuit area.

GD
by electrojoe
Wed Dec 16, 2020 11:33 am
Forum: Moog Music General Topics Forum
Topic: Memorymoog "DEAD OSC" on all voice cards OSC3
Replies: 39
Views: 11640

Re: Memorymoog "DEAD OSC" on all voice cards OSC3

Hello, If you tune them by ear its a lot easier. Disable the auto tune (C-6) and enable only that voice (C-4) and tune it to a reference oscillator to start. Adjust the scale, but don't worry about retuning the initial frequency until you have at least a decent octave range set. Then test at 2 octav...
by electrojoe
Fri Sep 27, 2019 2:55 pm
Forum: Moog Music General Topics Forum
Topic: Moog Memorymoog v. 2.5 firmware
Replies: 3
Views: 4289

Re: Moog Memorymoog v. 2.5 firmware

Hello, I don't have the files, but I have some chips if you wanted to go directly to the chips. You can send me a PM.
by electrojoe
Fri Sep 27, 2019 2:54 pm
Forum: Moog Music General Topics Forum
Topic: Micromoog parts source needed
Replies: 5
Views: 9284

Re: Micromoog parts source needed

You really need to check the ground on the ribbon controller. If that's loose the ribbon won't work. However I can rebuild them if you need to. Send me a PM.
by electrojoe
Fri Sep 27, 2019 2:52 pm
Forum: Moog Music General Topics Forum
Topic: Minimoog Squirrelly Keys!
Replies: 2
Views: 2458

Re: Minimoog Squirrelly Keys!

I would check your cinch Jones keyboard connector. Those things can get squirrelly when you take them apart and put them back together if they're not clean.
by electrojoe
Sat May 05, 2018 11:38 pm
Forum: Moog Music General Topics Forum
Topic: MG-1 won't play B, C and C#
Replies: 8
Views: 5388

Re: MG-1 won't play B, C and C#

Have you scoped out the top active divider yet?
The trigger for the mono section is generated from the poly section.
So if you have notes out on the TOC, the mono notes will not trigger.

Oscilloscope is your best friend for testing those.

GD
by electrojoe
Tue Mar 21, 2017 10:36 am
Forum: Moog Music General Topics Forum
Topic: My Source is crazy, but in a catatonic sort of way
Replies: 25
Views: 10920

Re: My Source is crazy, but in a catatonic sort of way

Hello,
I have them.
Why do you suspect the ROM is out?

GD
by electrojoe
Tue Mar 07, 2017 9:12 am
Forum: Modular Forum
Topic: 1150 Ribbon Controller Slider replacement
Replies: 2
Views: 2881

Re: 1150 Ribbon Controller Slider replacement

Hello,
Your best bet is to repair the existing pot.
I do this all the time on vintage pots.
You will need to find the same make pot at any value, and open them up and replace the slider stem.

Hope that gives you some ideas.

GD
by electrojoe
Tue Mar 07, 2017 9:09 am
Forum: Moog Music General Topics Forum
Topic: multimoog missing osc b pcb
Replies: 4
Views: 3063

Re: multimoog missing osc b pcb

Hello,
You might be missing more than the tandem board if you have open holes in the top of the unit.
There are 2 small circuit boards in the Multimoog.
One is the tandem board and the other is the (pot/switch) top board.

You will need them both.

Good luck on your search/project.

GD
by electrojoe
Wed Feb 08, 2017 5:32 pm
Forum: Moog Music General Topics Forum
Topic: Help! The Source is killing me!!!
Replies: 21
Views: 10971

Re: Help! The Source is killing me!!!

Hello,
What Parts in the touch panel matrix circuit have you tried so far?


GD
by electrojoe
Wed Feb 08, 2017 5:16 pm
Forum: Moog Music General Topics Forum
Topic: Moog System 35 from Hell!!!!
Replies: 6
Views: 4777

Re: Moog System 35 from Hell!!!!

Hello, I would try to isolate the issue first by removing the 921A and 921B (the most troublesome one) from the cabinet and putting it on your bench with another power supply and connectors. Based on the schematics, it only requires +12 -6 Gnd and then the summing node, reference ground and the PW i...
by electrojoe
Fri Jan 06, 2017 11:16 am
Forum: Moog Music General Topics Forum
Topic: MemoryMoog latest firmware for non-plus
Replies: 9
Views: 6130

Re: MemoryMoog latest firmware for non-plus

Thanks RL!

I will do that on my next update install.

GD
by electrojoe
Wed Dec 21, 2016 12:07 am
Forum: Moog Music General Topics Forum
Topic: MemoryMoog latest firmware for non-plus
Replies: 9
Views: 6130

Re: MemoryMoog latest firmware for non-plus

Hi RL,
What should they be, for that firmware then? Just curious?

Thanks.
GD