Search found 152 matches

by toryjames
Sun Sep 16, 2018 12:22 pm
Forum: Moogerfooger Forum
Topic: New MF-103 Aux Out static sound and lower output
Replies: 4
Views: 2167

Re: New MF-103 Aux Out static sound and lower output

I just tried this with my unit. I see what you mean, there is movement but it tends to be very subtle with many of the possible panel settings. Here are my thoughts and suggestion: try 6-stage and turn the resonance down, because with resonance up, the main channel has very sharp peaks in the moving...
by toryjames
Sun Sep 16, 2018 11:55 am
Forum: Moogerfooger Forum
Topic: New MF-103 Aux Out static sound and lower output
Replies: 4
Views: 2167

Re: New MF-103 Aux Out static sound and lower output

From the manual: "AUX OUTPUT: Figure 6 shows the frequency response that you get when you start with the basic setup, and then listen to the AUX Output rather than the Main AUDIO Output. Note that the frequency response is the opposite of Figure 5. That is, the peaks of Figure 6 are at the same...
by toryjames
Tue Jul 10, 2018 1:25 pm
Forum: Werkstatt Forum
Topic: WS Envelope Decay/Release Response is my favorite
Replies: 1
Views: 2563

WS Envelope Decay/Release Response is my favorite

The shape of the Werkstatt's decay/release envelope is my favorite. I have been searching for another envelope generator that has a similar slow-release sounding tail but have not been successful. I thought the Make Noise Maths might be versatile enough to do it but it was not. I imagine it's the si...
by toryjames
Tue Jul 10, 2018 1:07 pm
Forum: Werkstatt Forum
Topic: Need to replace one of the keyboard buttons, part number?
Replies: 2
Views: 2251

Re: Need to replace one of the keyboard buttons, part number

My high C is going bad also, I imagine coincidentally. Interesting.
by toryjames
Thu Jul 13, 2017 2:47 pm
Forum: Moogerfooger Forum
Topic: Using moogerfoogers on the aux send and return
Replies: 7
Views: 2936

Re: Using moogerfoogers on the aux send and return

Just looked, that is more mixer than I'm used to. :) Did you try all four aux send/returns? (Some appear to be pre or post eq) Also, there are many switches to reroute the signal. It sounds like a feedback loop of some sort. Could you take a picture of the problematic mixer setup?
by toryjames
Thu Jun 15, 2017 2:24 pm
Forum: Moogerfooger Forum
Topic: Using moogerfoogers on the aux send and return
Replies: 7
Views: 2936

Re: Using moogerfoogers on the aux send and return

The signal coming from a mixer is much stronger than a guitar pedal is designed for. ReAmp boxes were designed to reduce these line-level signals and matching the impedance going into a guitar pedal. What happens when you sweep from minimum, on the amount send knob, through to maximum? I am guessing...
by toryjames
Thu Jun 15, 2017 2:09 pm
Forum: Moogerfooger Forum
Topic: Inside your moogerfooger, circuit photographs
Replies: 4
Views: 2234

Re: Inside your moogerfooger, circuit photographs

(Original) MuRF MF-105
Image
by toryjames
Thu Jun 15, 2017 1:56 pm
Forum: Moogerfooger Forum
Topic: Inside your moogerfooger, circuit photographs
Replies: 4
Views: 2234

Inside your moogerfooger, circuit photographs

I am often curious how simple or elaborate a circuit is (For example, if you look inside a Fuzz Face, there is almost nothing inside). I am starting this thread in hopes that people will share their photographs of the inside of their moogerfoogers (and possibly other devices). Thank you in advance f...
by toryjames
Mon Mar 13, 2017 1:40 am
Forum: Werkstatt Forum
Topic: Kenton Pro Solo with Werkstatt
Replies: 4
Views: 4184

Re: Kenton Pro Solo with Werkstatt

I did your gate in mod today, nathan, thanks for sharing the information. It works great. I love playing the werkstatt with my mcmillan keyboard. Couldn't do it before.
by toryjames
Wed Jan 04, 2017 1:29 am
Forum: Werkstatt Forum
Topic: Kenton Pro Solo with Werkstatt
Replies: 4
Views: 4184

Re: Kenton Pro Solo with Werkstatt

I have a Werkstatt and a Kenton Pro-Solo and have not had success with the Kenton's trigger being strong enough for the Werkstatt. The Korg SQ-1 sequencer does not trigger the gate on the Werkstatt either. The Arturia Beatstep Pro and Keystep do successfully open the Werkstatt's gate. Yes, you have ...
by toryjames
Sun Oct 09, 2016 1:56 am
Forum: Little Phatty & Slim Phatty Forum
Topic: Little phatty stage 2 modulation wheel sticky rubber
Replies: 11
Views: 8641

Re: Little phatty stage 2 modulation wheel sticky rubber

I just noticed this with my LP Stage pitch/mod wheels. I wiped them with a damp cloth thinking it was a substance that got on them (a kid with sticky fingers?) but realized it wasn't going away and started feeling increasingly sticky as I wiped. I have been pressing clean sheets of paper on them and...
by toryjames
Sun Jan 17, 2016 4:36 pm
Forum: Werkstatt Forum
Topic: Werkstatt+EHX 8 Step program= Moog Mother 32?
Replies: 18
Views: 10313

Re: Werkstatt+EHX 8 Step program= Moog Mother 32?

I have heard the original Beatstep does not have a strong enough trigger voltage for opening the gate/env on the Werkstatt and neither does the SQ1 (5 volts I'm guessing) but the Beatstep Pro puts out a stronger trigger (8-10 volts) that works well in my experience. The Beatstep and SQ1 control volt...
by toryjames
Wed Dec 30, 2015 12:30 am
Forum: Werkstatt Forum
Topic: Werkstatt+EHX 8 Step program= Moog Mother 32?
Replies: 18
Views: 10313

Re: Werkstatt+EHX 8 Step program= Moog Mother 32?

Yes, my BSP triggers my werkstatt without any problem (I was sad the SQ1 wouldn't as well).
by toryjames
Sun Oct 25, 2015 11:39 pm
Forum: Little Phatty & Slim Phatty Forum
Topic: SP louder than LP?
Replies: 9
Views: 3612

Re: SP louder than LP?

Several months ago I purchased two new Slim Phattys to use with my LP Stage II to make a 3-voice poly synth. I immediately noticed that the LP's audio signal was significantly quieter than the two SPs. I have been through every setting I can think of to try and find a possible reason for the volume ...