Moog Music Forum

I have the Slim Phatty Firmware 3.21



The Filter Sensitivity
Values: -8... 0... +8

and (This is missing in the manual)

The Volume Sensitivity
Values: 1-15

I don't know if you solved it yet
but if not try this first: viewtopic.php?p=179409#p179409

Moog Voyager Sub
£0.00

https://www.audioanimals.co.uk/shop/sam ... oyager-sub

or LittleOne 49.90 EURO / €

I have a Slim Phatty and this one does really sound like it:

https://www.xhun-audio.com/site/xhun.php?page=littleone

Check your Midi menu 2.1 settings.

set it to USB or DIN depends on how you connected it.

and important: set Midi/DIN ECHO = off!

If you connected via USB don't use a USB-HUB use the direct USB port of your PC!

USB sometimes fails so it's maybe better to use Midi DIN cables.

There are still 2 options:
Local = off?
Sync button = lights up

I heard this would help;
must be 12% Hydrogen Peroxyde
https://www.ebay.com/itm/273429049470

You can control the Slim Phatty whith a midi controller!

I think all can be reached via Midi CC

This can be done by a midi controller such as Behringer BRC2000.

Once programmed all you have to do is remember the BCR2000's controls and buttons!

Error level No. 1 = not reading manual! ;-) Page 22-24 and Page 51-53 (50-52) example FILTER AMT Use this knob to specify the positive or negative depth of variation applied to the filter’s cutoff frequency. Applying LFO modulation to the filter is useful for generating slow filter sweeps, wobbles, ...

Upload lost this:

Your EWI not only sends MIDI CC'2! You must filter out other MIDI CCs! See the MIDI controller list in the manual. (both EWI and S-37!) For example, you can use a midi foot controller, to send MIDI CC'2 and test your settings on the S-37! The PGM SRC can be anything except SINE or NOISE LFO! On this...

USB on the Slim Phatty is not the best way ...
Use midi cables instead, which work better for me!

My Subsequent 37 CV the gate and CV out reacted on no signals! Even if I set 0-5 V or 0-10 V for CV out the measuring device only shows the standard value -5 V. No matter what I give as a source, it remains unchanged. Do you have an idea why? And / or can some provide me with a circuit diagram, then...

Update: My Subsequent 37 CV reacted to the calibration by chance! the next day it was like before; unusable! After opening and checking it it turned out to be a mechanical problem! The Pitch Wheel simply turned on the axis without moving the axis! It was mechanically worn out or simply had too much...

I tested the Sub_37_Pot_Calibration files with my Subsequent 37 CV. seems to work... but however, it is so that when I use an external MIDI controller with PW The pitch bend area goes much further! With the PW of the Subsequent 37 CV it sounds throttled in the upper and lower range. With my old Yama...