Search found 54 matches

by Sugar
Tue Jun 07, 2022 3:16 pm
Forum: Moog One
Topic: Monitoring modulation through the CV OUT
Replies: 6
Views: 5972

Re: Monitoring modulation through the CV OUT

I have Tektronix TBS2072, 2 channels, a huge screen and no fan.
by Sugar
Mon Jun 06, 2022 6:43 pm
Forum: Moog One
Topic: Monitoring modulation through the CV OUT
Replies: 6
Views: 5972

Re: Monitoring modulation through the CV OUT

In case you think about using M1 to process external CV, unfortunately the incoming signal will be filtered as well. red: a square wave from an external analog LFO @16Hz blue: the same square wave going through M1. (CV IN > Matrix > CV OUT) TEK00001.PNG red: M1 LFO1 square wave from CV OUT1 blue: th...
by Sugar
Fri Jun 03, 2022 8:23 pm
Forum: Moog One
Topic: Monitoring modulation through the CV OUT
Replies: 6
Views: 5972

Re: Monitoring modulation through the CV OUT

It looks like this heavy filtering has only been applied to the CV output and not to the modulation signal in the Mod Matrix. red: CV output: This is a close-up of Moog One LFO1 square wave at 5Hz, blue: audio output: the same LFO modulates OSC1 Mixer, notice a 3ms delay, but also a much sharper squ...
by Sugar
Fri Jun 03, 2022 8:11 pm
Forum: Moog One
Topic: Monitoring modulation through the CV OUT
Replies: 6
Views: 5972

Re: Monitoring modulation through the CV OUT

Moog One LFO1 square wave at 100Hz, the amplitude is only at half-range
TEK00005.PNG

Moog One LFO1 square wave at 150Hz, the signal becomes distorted.
TEK00004.PNG
Moog One LFO1 square wave at 150Hz, a close-up
TEK00006.PNG
by Sugar
Fri Jun 03, 2022 8:07 pm
Forum: Moog One
Topic: Monitoring modulation through the CV OUT
Replies: 6
Views: 5972

Re: Monitoring modulation through the CV OUT

Moog One LFO1 square wave at 10Hz
TEK00002.PNG

Moog One LFO1 square wave at 25Hz
TEK00001.PNG

Moog One LFO1 square wave at 50Hz, notice the loss of amplitude for anything above 25Hz
TEK00003.PNG
by Sugar
Fri Jun 03, 2022 8:01 pm
Forum: Moog One
Topic: Monitoring modulation through the CV OUT
Replies: 6
Views: 5972

Monitoring modulation through the CV OUT

With the new CV functionality, I've tested how M1's modulation signal looks like. What you see below is oscilloscope screenshots of LFO1 set to a square wave. Notice that there is a substantial amount of smoothing applied and the square wave doesn't exactly look like you would expect. For comparison...
by Sugar
Fri Jun 03, 2022 6:31 pm
Forum: Moog One
Topic: User Tuning (not Oscillator Compensation)
Replies: 4
Views: 2732

Re: User Tuning (not Oscillator Compensation)

just open an M1 preset in a text editor.
by Sugar
Fri Jun 03, 2022 5:18 pm
Forum: Moog One
Topic: System Calibration - Multimeter suggestions?
Replies: 10
Views: 13215

Re: System Calibration - Multimeter suggestions?

The calibration guide will tell you how and when to connect it.
From what I remember the TRS end goes to the headphones out and the two TS ends to the CV ins.
by Sugar
Fri Jun 03, 2022 3:23 pm
Forum: Moog One
Topic: System Calibration - Multimeter suggestions?
Replies: 10
Views: 13215

Re: System Calibration - Multimeter suggestions?

for reliability, I would get Fluke 117. It's expensive though.
by Sugar
Fri May 27, 2022 4:16 pm
Forum: Moog One
Topic: Does 1.5 sound better?
Replies: 6
Views: 3922

Does 1.5 sound better?

I updated to 1.5, performed all the calibration routines, started playing the new Lisa Bella Donna's presets and... M1 has never sounded so good and alive. The sound feels cleaner and more open (brighter), with more detail. The new presets are so beautifully balanced. On the other hand the long time...
by Sugar
Sat Jan 29, 2022 3:05 am
Forum: Moog Semi-Modular Analog Synthesizers
Topic: Wooden end pieces for Grandmother?
Replies: 14
Views: 37146

Re: Wooden end pieces for Grandmother?

I would love contrasting wood panels for Matriarch Dark Edition. A classic Moog look.
by Sugar
Sat Dec 04, 2021 4:09 pm
Forum: Moog One
Topic: Long notes distort sound when using MIDI in
Replies: 2
Views: 8108

Re: Long notes distort sound when using MIDI in

are you sure you're not triggering the same note twice? one local and a duplicate through MIDI?
Check your voice count when this happens.
by Sugar
Wed Jul 28, 2021 12:11 am
Forum: Moog One
Topic: 3 synthy can be controlled by 3 Midi cannels ?
Replies: 21
Views: 35697

Re: 3 synthy can be controlled by 3 Midi cannels ?

I'm afraid you misunderstand the MIDI workflow with a DAW. You are not supposed to trigger your synths directly from the keyboard. You will end up with doubled notes -- the same note will be triggered by your keyboard and by your DAW. I suggest that you google "MIDI and 'Local Off'".
by Sugar
Sun Jul 25, 2021 10:04 pm
Forum: Moog One
Topic: 3 synthy can be controlled by 3 Midi cannels ?
Replies: 21
Views: 35697

Re: 3 synthy can be controlled by 3 Midi cannels ?

Change to the following in the Settings.
MIDI I/O > MIDI OUT ROUTE > ALL SYNTHS

this should solve your problem.
You will still be able to trigger individual synths through their respective MIDI channels.

IMG_4184.jpg
by Sugar
Fri Jul 23, 2021 8:49 pm
Forum: Moog One
Topic: 3 synthy can be controlled by 3 Midi cannels ?
Replies: 21
Views: 35697

Re: 3 synthy can be controlled by 3 Midi cannels ?

just to make sure we are talking about the same thing... turn off keyboard control for all synths, to verify that your ONE doesn't send any MIDI notes. PANEL FOCUS > SYNTH 1 KEYBOARD CONTROL > ON to OFF PANEL FOCUS > SYNTH 2 KEYBOARD CONTROL > ON to OFF PANEL FOCUS > SYNTH 3 KEYBOARD CONTROL > ON to...