Search found 29 matches
Re: YES !
They didn't fix a kind of small thing that I've been asking for since Moog One came out. I will send it to them again since I think it's actually a fundamental issue. Basically, when you use any LFO to modulate the WAVE angle and that LFO is unipolar, the Modulation direction is inverted, which is ...
Re: YES !
At last. I am happy the sustain pedal now works via MIDI. Some bugs are corrected, some not. Delay is still out of sync 🙁 Try a simple arpeggiator sequence running at 120BPM (internal clock) combined with a dotted eight delay. In theory, the delay value should be 375ms, but to get the sound right, o...
- Fri Apr 15, 2022 5:27 am
- Forum: Moog One
- Topic: A few concerns before I buy the Moog One
- Replies: 8
- Views: 15483
Re: A few concerns before I buy the Moog One
As long as midi clock is being sent, it works fine. Not exactly. At first glance, it might. But once you are picky to details, sync is flawed. Try a dotted eight delay setting, synced to midi. Timing is off by 30ms or so, on every repeat. It makes synced delays blurry and unusable for professional ...
- Wed Nov 17, 2021 1:01 pm
- Forum: Moog One
- Topic: Can't get support from Moog
- Replies: 14
- Views: 33856
Re: Can't get support from Moog
Almost end of 2021, I get no support either. These people are incredible. I guess they don’t want return customers. When I had an issue with my Dave Smith Prophet 08, they got back to me within 2 days. Sequential support is awesome. They able to turn an issue, into a positive user experience. They ...
- Thu Sep 03, 2020 3:15 am
- Forum: Moog One
- Topic: SUB OUTS: so much quieter... and noisier
- Replies: 15
- Views: 10393
Re: SUB OUTS: so much quieter... and noisier
Wait a minute, do you actually use your ONE cranked up to those levels? No, but SNR is relatively independent from the signal level. When you boost the output, you boost both signal and noise equally (in first approximation). And this setting I recommended is one that makes the difference between t...
- Wed Sep 02, 2020 9:16 am
- Forum: Moog One
- Topic: SUB OUTS: so much quieter... and noisier
- Replies: 15
- Views: 10393
Re: SUB OUTS: so much quieter... and noisier
So, did any of you with this situation try the setup I described earlier? I'm curious if you get the same results I did. You are right and not. If you set the master volume to 50%, then indeed matches the signal level of the sub outputs. However, the sub outputs are noisier. Try this : Set the sub ...
- Mon Aug 31, 2020 10:19 am
- Forum: Moog One
- Topic: SUB OUTS: so much quieter... and noisier
- Replies: 15
- Views: 10393
Re: SUB OUTS: so much quieter... and noisier
it could be reversed pin wiring of the sub outputs, which would result in decreased signal level and increased noise. Yes, it could be. I got in touch with a user that got the same problem, sent the One back for replacement, and the new one he received had just the same behavior. So, I guess that i...
- Sun Aug 16, 2020 10:33 am
- Forum: Moog One
- Topic: SUB OUTS: so much quieter... and noisier
- Replies: 15
- Views: 10393
Re: SUB OUTS: so much quieter... and noisier
Glad you confirmed. Because I was wondering if something was bad with mine in particular. Another serious issue affecting such a flagship instrument then...
- Thu Aug 13, 2020 8:07 am
- Forum: Moog One
- Topic: Moog One Bugs
- Replies: 98
- Views: 293065
Re: Moog One Bugs
All my bug reports are left unanswered too. The frustration is growing... growing... growing... Especially for the price paid to own a One. Moog doesn't even consider you as beta tester. Beta testers receive at least an acknowledgement. Not us. Moog will learn the hard way how you can't stop negativ...
- Fri Aug 07, 2020 9:00 am
- Forum: Moog One
- Topic: SUB OUTS: so much quieter... and noisier
- Replies: 15
- Views: 10393
SUB OUTS: so much quieter... and noisier
When I set MAIN OUTs and SUB OUTs to the same barograph level on the output page, the SUB OUT is actually 24dB quieter than the MAIN OUT. And it so much noisier too (when one then boost it by 24dB) - it sounds like there is a classic organ leaking in the background (sort of harmonic whining) that is...
- Mon Jun 22, 2020 9:03 am
- Forum: Moog One
- Topic: v1.4: Oscillator Compensation Calibration
- Replies: 8
- Views: 4891
Re: v1.4: Oscillator Compensation Calibration
Well, 1.4 broke many of my patches. They sound not the same anymore, big time. I contacted Moog, but they didn't answer my email. I suspect the filter velocity settings to have changed (maybe a former bug related to that section has been now fixed, with as a result drastically changing the sound of ...
- Fri Oct 25, 2019 2:38 am
- Forum: Moog One
- Topic: v1.1.0 Bug Reports Thread
- Replies: 11
- Views: 7136
Re: v1.1.0 Bug Reports Thread
Noise Reduction Gate Produces Audible Clicks
When noise reduction is engaged, one can hear audible "clicks" (more of a thumping than clicking) in the lower end of the spectrum, when a note is depressed. Especially audible on quiet patches.
When noise reduction is engaged, one can hear audible "clicks" (more of a thumping than clicking) in the lower end of the spectrum, when a note is depressed. Especially audible on quiet patches.
- Sat Oct 12, 2019 9:43 am
- Forum: Moog One
- Topic: v1.1.0 Bug Reports Thread
- Replies: 11
- Views: 7136
Re: v1.1.0 Bug Reports Thread
Thanks vwizz. I was wrong indeed, and made a correction to the post above. In my case, the problem with the INIT PATCH to have sustain level set to the max. And that setting caused MULTI TRIG to make no difference.
- Sat Oct 12, 2019 5:00 am
- Forum: Moog One
- Topic: v1.1.0 Bug Reports Thread
- Replies: 11
- Views: 7136
Re: v1.1.0 Bug Reports Thread
Before, when something didn't behave as expected, I though I was the culprit. But now, as I realized that even something as huge as Velocity Curves are not working (at all ) - I am more and more suspicious with the One, when something doesn't work as expected. And here is another big one... MULTI TR...
- Sat Oct 12, 2019 4:55 am
- Forum: Moog One
- Topic: v1.1.0 Bug Reports Thread
- Replies: 11
- Views: 7136
Re: v1.1.0 Bug Reports Thread
I've noticed that the WAVE ANGLE of the TRI WAVE & SAW WAVE doesn't register correctly when used as a MOD destination. Basically, if you choose WAVE ANGLE as destination, inputting a +100% value actually registers as -100%, and inputting a negative value will return a positive value. It's prett...