Moog Music Forum

I have a VERY odd issue with my Mother-32 and Grandmother that ONLY happens with each other... When I send clock from my Grandmother (via CLOCK OUT on back) to the Mother-32 (via TEMPO IN), the Mother-32's LED stutters and nothing happens with the sequence. BUT 1.) If I send any other device's tempo...

It's hit or miss.... I finally got a reply!

Like many others, I acquired the ecosystem individually over time. Now that they are sold as sets, I'd love Moog to make the card game ((and 2-tier dice box games) available, even if just as PDFs. Does anybody have an email or other comms channel that one could use to suggest this to Moog?

It's been 2 months since I reached out to Moog support for help to determine if a problem I'm having (Mother-32 does not tempo-sync from Grandmother Clock Out but does from other devices) requires either my Mother-32 and/or Grandmother to be repaired... and RADIO SILENCE. Have sent numerous follow-u...

I tried running the GM's clock out thru it's attenuator them melting that output to the M32 tempo in and an o-scope. M32 works fine when GM's clock output is +1v to ~ 3.4v, but stops registering when greater than ~+3.4v. Is the Grandmother's clock output edge slope not enough to trigger the M32's 1v...

Help! This is odd... am I missing something, do I have a setting throwing things off, or does one of my devices have a problem? If I send clock from my GM to my M32 (ARP/SEQ CV out to tempo in) the M32's Tempo LED blinks green 'once' and it just sits there doing nothing. If I clock into the M32 from...

It works now!? Here's what I did different. I ran an oscillator calibration (which by the way worked wonders for my tuning!) and figured I'd verify your question, if the FW actually installed, so I checked a different new feature introduced at the same time in 1.0.6 and that worked. So, I tried agai...

It does work, but don't use the attenuator, go directly from the modular wave out to the clock in. (Attenuating sets the signal from -signal max to 0 then up to signal max, so if the LFO output is +/- 5v, the attenuator will only send a rising edge greater than 2.5v if it is a quarter past center in...

According to the manual, there are a pair of functions within the global edit mode that allow me to load factory settings and show firmware version. The indicator is the 3 LHC buttons blinking (varies depending on which function is selected). When I try, I get nothing. Neither of these functions see...

sorted: it's a bug in FW 2.x. Moog knows about it and is working on it.

I am seeing inconsistent behavior when clocking a DFAM from a M32. 1) When sending clock out from my M32, the 1st step is received like a quick pulse and throws everything off, effectively, sending 2 clocks on the 1st step. This behavior seems to start after I change a pattern and reset. This doesn'...

I have the same problem... it only happens after changing sequences... it is OK when running the 1st sequence after boot up. If I change sequence then reset, I get that quick pulse on the 1st step.

I am on FW 2.0.1, but also saw this behavior on 2.0.

Sounds like your Delay Pattern Change setting ( pg 8 ) is off... turn it on maybe?

ahhhh! makes perfect sense!!!! thanks for the assist!

I have a dummy/dead cable patched into the external audio jack and have the mix knob full right (to noise/ext). I assume the dummy cable breaks the normal and I should hear silence. With headphones on, I can hear noise triggered with the seq pattern. (With the VCA out to an oscilloscope, I can see v...